update 1.8
This commit is contained in:
qiyongshuang
@@ -0,0 +1,41 @@
|
||||
/********************************** (C) COPYRIGHT *******************************
|
||||
* File Name : ch32v20x_conf.h
|
||||
* Author : WCH
|
||||
* Version : V1.0.0
|
||||
* Date : 2021/06/06
|
||||
* Description : Library configuration file.
|
||||
*********************************************************************************
|
||||
* Copyright (c) 2021 Nanjing Qinheng Microelectronics Co., Ltd.
|
||||
* Attention: This software (modified or not) and binary are used for
|
||||
* microcontroller manufactured by Nanjing Qinheng Microelectronics.
|
||||
*******************************************************************************/
|
||||
#ifndef __CH32V20x_CONF_H
|
||||
#define __CH32V20x_CONF_H
|
||||
|
||||
#include "ch32v20x_adc.h"
|
||||
#include "ch32v20x_bkp.h"
|
||||
#include "ch32v20x_can.h"
|
||||
#include "ch32v20x_crc.h"
|
||||
#include "ch32v20x_dbgmcu.h"
|
||||
#include "ch32v20x_dma.h"
|
||||
#include "ch32v20x_exti.h"
|
||||
#include "ch32v20x_flash.h"
|
||||
#include "ch32v20x_gpio.h"
|
||||
#include "ch32v20x_i2c.h"
|
||||
#include "ch32v20x_iwdg.h"
|
||||
#include "ch32v20x_pwr.h"
|
||||
#include "ch32v20x_rcc.h"
|
||||
#include "ch32v20x_rtc.h"
|
||||
#include "ch32v20x_spi.h"
|
||||
#include "ch32v20x_tim.h"
|
||||
#include "ch32v20x_usart.h"
|
||||
#include "ch32v20x_wwdg.h"
|
||||
#include "ch32v20x_it.h"
|
||||
#include "ch32v20x_misc.h"
|
||||
|
||||
#endif /* __CH32V20x_CONF_H */
|
||||
|
||||
|
||||
|
||||
|
||||
|
||||
@@ -0,0 +1,72 @@
|
||||
/********************************** (C) COPYRIGHT *******************************
|
||||
* File Name : ch32v20x_it.c
|
||||
* Author : WCH
|
||||
* Version : V1.0.0
|
||||
* Date : 2021/06/06
|
||||
* Description : Main Interrupt Service Routines.
|
||||
*********************************************************************************
|
||||
* Copyright (c) 2021 Nanjing Qinheng Microelectronics Co., Ltd.
|
||||
* Attention: This software (modified or not) and binary are used for
|
||||
* microcontroller manufactured by Nanjing Qinheng Microelectronics.
|
||||
*******************************************************************************/
|
||||
#include "ch32v20x_it.h"
|
||||
#include "eth_driver.h"
|
||||
|
||||
void NMI_Handler(void) __attribute__((interrupt("WCH-Interrupt-fast")));
|
||||
void HardFault_Handler(void) __attribute__((interrupt("WCH-Interrupt-fast")));
|
||||
void ETH_IRQHandler(void) __attribute__((interrupt("WCH-Interrupt-fast")));
|
||||
void TIM2_IRQHandler(void) __attribute__((interrupt("WCH-Interrupt-fast")));
|
||||
|
||||
/*********************************************************************
|
||||
* @fn NMI_Handler
|
||||
*
|
||||
* @brief This function handles NMI exception.
|
||||
*
|
||||
* @return none
|
||||
*/
|
||||
void NMI_Handler(void)
|
||||
{
|
||||
/**/
|
||||
}
|
||||
|
||||
/*********************************************************************
|
||||
* @fn HardFault_Handler
|
||||
*
|
||||
* @brief This function handles Hard Fault exception.
|
||||
*
|
||||
* @return none
|
||||
*/
|
||||
void HardFault_Handler(void)
|
||||
{
|
||||
printf("HardFault_Handler\r\n");
|
||||
printf("mcause:%08x\r\n",__get_MCAUSE());
|
||||
printf("mtval:%08x\r\n",__get_MTVAL());
|
||||
printf("mepc:%08x\r\n",__get_MEPC());
|
||||
while (1);
|
||||
}
|
||||
|
||||
/*********************************************************************
|
||||
* @fn ETH_IRQHandler
|
||||
*
|
||||
* @brief This function handles ETH exception.
|
||||
*
|
||||
* @return none
|
||||
*/
|
||||
void ETH_IRQHandler(void)
|
||||
{
|
||||
WCHNET_ETHIsr();
|
||||
}
|
||||
|
||||
/*********************************************************************
|
||||
* @fn TIM2_IRQHandler
|
||||
*
|
||||
* @brief This function handles TIM2 exception.
|
||||
*
|
||||
* @return none
|
||||
*/
|
||||
void TIM2_IRQHandler(void)
|
||||
{
|
||||
WCHNET_TimeIsr(WCHNETTIMERPERIOD);
|
||||
TIM_ClearITPendingBit(TIM2, TIM_IT_Update);
|
||||
}
|
||||
|
||||
@@ -0,0 +1,19 @@
|
||||
/********************************** (C) COPYRIGHT *******************************
|
||||
* File Name : ch32v20x_it.h
|
||||
* Author : WCH
|
||||
* Version : V1.0.0
|
||||
* Date : 2021/06/06
|
||||
* Description : This file contains the headers of the interrupt handlers.
|
||||
*********************************************************************************
|
||||
* Copyright (c) 2021 Nanjing Qinheng Microelectronics Co., Ltd.
|
||||
* Attention: This software (modified or not) and binary are used for
|
||||
* microcontroller manufactured by Nanjing Qinheng Microelectronics.
|
||||
*******************************************************************************/
|
||||
#ifndef __CH32V20x_IT_H
|
||||
#define __CH32V20x_IT_H
|
||||
|
||||
#include "debug.h"
|
||||
|
||||
#endif /* __CH32V20x_IT_H */
|
||||
|
||||
|
||||
@@ -0,0 +1,134 @@
|
||||
/********************************** (C) COPYRIGHT *******************************
|
||||
* File Name : main.c
|
||||
* Author : WCH
|
||||
* Version : V1.0.0
|
||||
* Date : 2022/05/31
|
||||
* Description : Main program body.
|
||||
*********************************************************************************
|
||||
* Copyright (c) 2021 Nanjing Qinheng Microelectronics Co., Ltd.
|
||||
* Attention: This software (modified or not) and binary are used for
|
||||
* microcontroller manufactured by Nanjing Qinheng Microelectronics.
|
||||
*******************************************************************************/
|
||||
/*
|
||||
*@Note
|
||||
MAC RAW example, demonstrating that MAC RAW receives and sends data.
|
||||
For details on the selection of engineering chips,
|
||||
please refer to the "CH32V20x Evaluation Board Manual" under the CH32V20xEVT\EVT\PUB folder.
|
||||
*/
|
||||
#include "string.h"
|
||||
#include "eth_driver.h"
|
||||
|
||||
extern volatile uint8_t LinkSta;
|
||||
uint8_t MACAddr[6]; //MAC address
|
||||
uint8_t ARPPackage[]=
|
||||
{
|
||||
0xff, 0xff, 0xff, 0xff, 0xff, 0xff, /* destination MAC address */
|
||||
0x84, 0xc2, 0xe4, 0x01, 0x02, 0x03, /* source MAC address */
|
||||
0x08,0x06, /* Type:ARP */
|
||||
0x00,0x01, /* Hardware type:Ethernet(1) */
|
||||
0x08,0x00, /* Protocol type:IPv4 */
|
||||
0x06,0x04, /* Hardware size and Protocol size*/
|
||||
0x00,0x01, /* Opcode:request(1) */
|
||||
0x84, 0xc2, 0xe4, 0x01, 0x02, 0x03, /* Sender MAC address */
|
||||
0xc0,0xa8,0x1,0x0f, /* Sender IP address */
|
||||
0x00,0x00,0x00,0x00,0x00,0x00, /* Target MAC address */
|
||||
0xc0,0xa8,0x1,0x64, /* Target IP address */
|
||||
#if 1 /* padding 16 bytes * line numbers */
|
||||
0x55,0x55,0x55,0x55,0x55,0x55,0x55,0x55,0x55,0x55,0x55,0x55,0x55,0x55,0x55,0x55,
|
||||
0x55,0x55,0x55,0x55,0x55,0x55,0x55,0x55,0x55,0x55,0x55,0x55,0x55,0x55,0x55,0x55,
|
||||
0x55,0x55,0x55,0x55,0x55,0x55,0x55,0x55,0x55,0x55,0x55,0x55,0x55,0x55,0x55,0x55,
|
||||
0x55,0x55,0x55,0x55,0x55,0x55,0x55,0x55,0x55,0x55,0x55,0x55,0x55,0x55,0x55,0x55,
|
||||
0x55,0x55,0x55,0x55,0x55,0x55,0x55,0x55,0x55,0x55,0x55,0x55,0x55,0x55,0x55,0x55,
|
||||
0x55,0x55,0x55,0x55,0x55,0x55,0x55,0x55,0x55,0x55,0x55,0x55,0x55,0x55,0x55,0x55,
|
||||
0x55,0x55,0x55,0x55,0x55,0x55,0x55,0x55,0x55,0x55,0x55,0x55,0x55,0x55,0x55,0x55,
|
||||
0x55,0x55,0x55,0x55,0x55,0x55,0x55,0x55,0x55,0x55,0x55,0x55,0x55,0x55,0x55,0x55,
|
||||
0x55,0x55,0x55,0x55,0x55,0x55,0x55,0x55,0x55,0x55,0x55,0x55,0x55,0x55,0x55,0x55,
|
||||
0x55,0x55,0x55,0x55,0x55,0x55,0x55,0x55,0x55,0x55,0x55,0x55,0x55,0x55,0x55,0x55,
|
||||
0x55,0x55,0x55,0x55,0x55,0x55,0x55,0x55,0x55,0x55,0x55,0x55,0x55,0x55,0x55,0x55,
|
||||
0x55,0x55,0x55,0x55,0x55,0x55,0x55,0x55,0x55,0x55,0x55,0x55,0x55,0x55,0x55,0x55,
|
||||
0x55,0x55,0x55,0x55,0x55,0x55,0x55,0x55,0x55,0x55,0x55,0x55,0x55,0x55,0x55,0x55,
|
||||
0x55,0x55,0x55,0x55,0x55,0x55,0x55,0x55,0x55,0x55,0x55,0x55,0x55,0x55,0x55,0x55,
|
||||
0x55,0x55,0x55,0x55,0x55,0x55,0x55,0x55,0x55,0x55,0x55,0x55,0x55,0x55,0x55,0x55,
|
||||
0x55,0x55,0x55,0x55,0x55,0x55,0x55,0x55,0x55,0x55,0x55,0x55,0x55,0x55,0x55,0x55,
|
||||
0x55,0x55,0x55,0x55,0x55,0x55,0x55,0x55,0x55,0x55,0x55,0x55,0x55,0x55,0x55,0x55,
|
||||
0x55,0x55,0x55,0x55,0x55,0x55,0x55,0x55,0x55,0x55,0x55,0x55,0x55,0x55,0x55,0x55,
|
||||
0x55,0x55,0x55,0x55,0x55,0x55,0x55,0x55,0x55,0x55,0x55,0x55,0x55,0x55,0x55,0x55,
|
||||
0x55,0x55,0x55,0x55,0x55,0x55,0x55,0x55,0x55,0x55,0x55,0x55,0x55,0x55,0x55,0x55,
|
||||
0x55,0x55,0x55,0x55,0x55,0x55,0x55,0x55,0x55,0x55,0x55,0x55,0x55,0x55,0x55,0x55,
|
||||
0x55,0x55,0x55,0x55,0x55,0x55,0x55,0x55,0x55,0x55,0x55,0x55,0x55,0x55,0x55,0x55,
|
||||
0x55,0x55,0x55,0x55,0x55,0x55,0x55,0x55,0x55,0x55,0x55,0x55,0x55,0x55,0x55,0x55,
|
||||
0x55,0x55,0x55,0x55,0x55,0x55,0x55,0x55,0x55,0x55,0x55,0x55,0x55,0x55,0x55,0x55,
|
||||
0x55,0x55,0x55,0x55,0x55,0x55,0x55,0x55,0x55,0x55,0x55,0x55,0x55,0x55,0x55,0x55,
|
||||
0x55,0x55,0x55,0x55,0x55,0x55,0x55,0x55,0x55,0x55,0x55,0x55,0x55,0x55,0x55,0x55,
|
||||
0x55,0x55,0x55,0x55,0x55,0x55,0x55,0x55,0x55,0x55,0x55,0x55,0x55,0x55,0x55,0x55,
|
||||
0x55,0x55,0x55,0x55,0x55,0x55,0x55,0x55,0x55,0x55,0x55,0x55,0x55,0x55,0x55,0x55
|
||||
#endif
|
||||
};
|
||||
|
||||
/*********************************************************************
|
||||
* @fn TIM2_Init
|
||||
*
|
||||
* @brief Initializes TIM2.
|
||||
*
|
||||
* @return none
|
||||
*/
|
||||
void TIM2_Init(void)
|
||||
{
|
||||
TIM_TimeBaseInitTypeDef TIM_TimeBaseStructure = { 0 };
|
||||
|
||||
RCC_APB1PeriphClockCmd(RCC_APB1Periph_TIM2, ENABLE);
|
||||
|
||||
TIM_TimeBaseStructure.TIM_Period = SystemCoreClock / 1000000;
|
||||
TIM_TimeBaseStructure.TIM_Prescaler = WCHNETTIMERPERIOD * 1000 - 1;
|
||||
TIM_TimeBaseStructure.TIM_ClockDivision = 0;
|
||||
TIM_TimeBaseStructure.TIM_CounterMode = TIM_CounterMode_Up;
|
||||
TIM_TimeBaseInit(TIM2, &TIM_TimeBaseStructure);
|
||||
TIM_ITConfig(TIM2, TIM_IT_Update, ENABLE);
|
||||
|
||||
TIM_Cmd(TIM2, ENABLE);
|
||||
TIM_ClearITPendingBit(TIM2, TIM_IT_Update);
|
||||
NVIC_EnableIRQ(TIM2_IRQn);
|
||||
}
|
||||
|
||||
/*********************************************************************
|
||||
* @fn main
|
||||
*
|
||||
* @brief Main program
|
||||
*
|
||||
* @return none
|
||||
*/
|
||||
int main(void)
|
||||
{
|
||||
u8 i;
|
||||
uint32_t PktCnt = 0;
|
||||
|
||||
Delay_Init();
|
||||
USART_Printf_Init(115200); //USART initialize
|
||||
printf("MAC_RAW Test\r\n");
|
||||
if((SystemCoreClock == 60000000) || (SystemCoreClock == 120000000))
|
||||
printf("SystemClk:%d\r\n", SystemCoreClock);
|
||||
else
|
||||
printf("Error: Please choose 60MHz and 120MHz clock when using Ethernet!\r\n");
|
||||
WCHNET_GetMacAddr(MACAddr); //get the chip MAC address
|
||||
printf("mac addr:");
|
||||
for(i = 0; i < 6; i++)
|
||||
printf("%x ", MACAddr[i]);
|
||||
printf("\n");
|
||||
TIM2_Init();
|
||||
ETH_Init(MACAddr);
|
||||
/* change source MAC address */
|
||||
memcpy(&ARPPackage[6], MACAddr, 6);
|
||||
memcpy(&ARPPackage[22], MACAddr, 6);
|
||||
|
||||
while(1)
|
||||
{
|
||||
WCHNET_MainTask();
|
||||
if(LinkSta)
|
||||
{
|
||||
MACRAW_Tx(ARPPackage, sizeof(ARPPackage));
|
||||
if(++PktCnt % 100 == 0)
|
||||
printf("PktCnt:%d\r\n",PktCnt);
|
||||
Delay_Ms(100);
|
||||
}
|
||||
}
|
||||
}
|
||||
@@ -0,0 +1,990 @@
|
||||
/********************************** (C) COPYRIGHT *******************************
|
||||
* File Name : system_ch32v20x.c
|
||||
* Author : WCH
|
||||
* Version : V1.0.0
|
||||
* Date : 2021/06/06
|
||||
* Description : CH32V20x Device Peripheral Access Layer System Source File.
|
||||
* For HSE = 32Mhz (CH32V208x/CH32V203RBT6)
|
||||
* For HSE = 8Mhz (other CH32V203x)
|
||||
*********************************************************************************
|
||||
* Copyright (c) 2021 Nanjing Qinheng Microelectronics Co., Ltd.
|
||||
* Attention: This software (modified or not) and binary are used for
|
||||
* microcontroller manufactured by Nanjing Qinheng Microelectronics.
|
||||
*******************************************************************************/
|
||||
#include "ch32v20x.h"
|
||||
|
||||
/*
|
||||
* Uncomment the line corresponding to the desired System clock (SYSCLK) frequency (after
|
||||
* reset the HSI is used as SYSCLK source).
|
||||
* If none of the define below is enabled, the HSI is used as System clock source.
|
||||
*/
|
||||
//#define SYSCLK_FREQ_HSE HSE_VALUE
|
||||
//#define SYSCLK_FREQ_48MHz_HSE 48000000
|
||||
//#define SYSCLK_FREQ_56MHz_HSE 56000000
|
||||
//#define SYSCLK_FREQ_72MHz_HSE 72000000
|
||||
//#define SYSCLK_FREQ_96MHz_HSE 96000000
|
||||
#define SYSCLK_FREQ_120MHz_HSE 120000000
|
||||
//#define SYSCLK_FREQ_144MHz_HSE 144000000
|
||||
//#define SYSCLK_FREQ_HSI HSI_VALUE
|
||||
//#define SYSCLK_FREQ_48MHz_HSI 48000000
|
||||
//#define SYSCLK_FREQ_56MHz_HSI 56000000
|
||||
//#define SYSCLK_FREQ_72MHz_HSI 72000000
|
||||
//#define SYSCLK_FREQ_96MHz_HSI 96000000
|
||||
//#define SYSCLK_FREQ_120MHz_HSI 120000000
|
||||
//#define SYSCLK_FREQ_144MHz_HSI 144000000
|
||||
|
||||
/* Clock Definitions */
|
||||
#ifdef SYSCLK_FREQ_HSE
|
||||
uint32_t SystemCoreClock = SYSCLK_FREQ_HSE; /* System Clock Frequency (Core Clock) */
|
||||
#elif defined SYSCLK_FREQ_48MHz_HSE
|
||||
uint32_t SystemCoreClock = SYSCLK_FREQ_48MHz_HSE; /* System Clock Frequency (Core Clock) */
|
||||
#elif defined SYSCLK_FREQ_56MHz_HSE
|
||||
uint32_t SystemCoreClock = SYSCLK_FREQ_56MHz_HSE; /* System Clock Frequency (Core Clock) */
|
||||
#elif defined SYSCLK_FREQ_72MHz_HSE
|
||||
uint32_t SystemCoreClock = SYSCLK_FREQ_72MHz_HSE; /* System Clock Frequency (Core Clock) */
|
||||
#elif defined SYSCLK_FREQ_96MHz_HSE
|
||||
uint32_t SystemCoreClock = SYSCLK_FREQ_96MHz_HSE; /* System Clock Frequency (Core Clock) */
|
||||
#elif defined SYSCLK_FREQ_120MHz_HSE
|
||||
uint32_t SystemCoreClock = SYSCLK_FREQ_120MHz_HSE; /* System Clock Frequency (Core Clock) */
|
||||
#elif defined SYSCLK_FREQ_144MHz_HSE
|
||||
uint32_t SystemCoreClock = SYSCLK_FREQ_144MHz_HSE; /* System Clock Frequency (Core Clock) */
|
||||
#elif defined SYSCLK_FREQ_48MHz_HSI
|
||||
uint32_t SystemCoreClock = SYSCLK_FREQ_48MHz_HSI; /* System Clock Frequency (Core Clock) */
|
||||
#elif defined SYSCLK_FREQ_56MHz_HSI
|
||||
uint32_t SystemCoreClock = SYSCLK_FREQ_56MHz_HSI; /* System Clock Frequency (Core Clock) */
|
||||
#elif defined SYSCLK_FREQ_72MHz_HSI
|
||||
uint32_t SystemCoreClock = SYSCLK_FREQ_72MHz_HSI; /* System Clock Frequency (Core Clock) */
|
||||
#elif defined SYSCLK_FREQ_96MHz_HSI
|
||||
uint32_t SystemCoreClock = SYSCLK_FREQ_96MHz_HSI; /* System Clock Frequency (Core Clock) */
|
||||
#elif defined SYSCLK_FREQ_120MHz_HSI
|
||||
uint32_t SystemCoreClock = SYSCLK_FREQ_120MHz_HSI; /* System Clock Frequency (Core Clock) */
|
||||
#elif defined SYSCLK_FREQ_144MHz_HSI
|
||||
uint32_t SystemCoreClock = SYSCLK_FREQ_144MHz_HSI; /* System Clock Frequency (Core Clock) */
|
||||
#else
|
||||
uint32_t SystemCoreClock = HSI_VALUE; /* System Clock Frequency (Core Clock) */
|
||||
|
||||
#endif
|
||||
|
||||
__I uint8_t AHBPrescTable[16] = {0, 0, 0, 0, 0, 0, 0, 0, 1, 2, 3, 4, 6, 7, 8, 9};
|
||||
|
||||
|
||||
/* system_private_function_proto_types */
|
||||
static void SetSysClock(void);
|
||||
|
||||
#ifdef SYSCLK_FREQ_HSE
|
||||
static void SetSysClockToHSE( void );
|
||||
#elif defined SYSCLK_FREQ_48MHz_HSE
|
||||
static void SetSysClockTo48_HSE( void );
|
||||
#elif defined SYSCLK_FREQ_56MHz_HSE
|
||||
static void SetSysClockTo56_HSE( void );
|
||||
#elif defined SYSCLK_FREQ_72MHz_HSE
|
||||
static void SetSysClockTo72_HSE( void );
|
||||
#elif defined SYSCLK_FREQ_96MHz_HSE
|
||||
static void SetSysClockTo96_HSE( void );
|
||||
#elif defined SYSCLK_FREQ_120MHz_HSE
|
||||
static void SetSysClockTo120_HSE( void );
|
||||
#elif defined SYSCLK_FREQ_144MHz_HSE
|
||||
static void SetSysClockTo144_HSE( void );
|
||||
#elif defined SYSCLK_FREQ_48MHz_HSI
|
||||
static void SetSysClockTo48_HSI( void );
|
||||
#elif defined SYSCLK_FREQ_56MHz_HSI
|
||||
static void SetSysClockTo56_HSI( void );
|
||||
#elif defined SYSCLK_FREQ_72MHz_HSI
|
||||
static void SetSysClockTo72_HSI( void );
|
||||
#elif defined SYSCLK_FREQ_96MHz_HSI
|
||||
static void SetSysClockTo96_HSI( void );
|
||||
#elif defined SYSCLK_FREQ_120MHz_HSI
|
||||
static void SetSysClockTo120_HSI( void );
|
||||
#elif defined SYSCLK_FREQ_144MHz_HSI
|
||||
static void SetSysClockTo144_HSI( void );
|
||||
|
||||
#endif
|
||||
|
||||
/*********************************************************************
|
||||
* @fn SystemInit
|
||||
*
|
||||
* @brief Setup the microcontroller system Initialize the Embedded Flash Interface,
|
||||
* the PLL and update the SystemCoreClock variable.
|
||||
*
|
||||
* @return none
|
||||
*/
|
||||
void SystemInit (void)
|
||||
{
|
||||
RCC->CTLR |= (uint32_t)0x00000001;
|
||||
RCC->CFGR0 &= (uint32_t)0xF8FF0000;
|
||||
RCC->CTLR &= (uint32_t)0xFEF6FFFF;
|
||||
RCC->CTLR &= (uint32_t)0xFFFBFFFF;
|
||||
RCC->CFGR0 &= (uint32_t)0xFF80FFFF;
|
||||
RCC->INTR = 0x009F0000;
|
||||
SetSysClock();
|
||||
}
|
||||
|
||||
|
||||
/*********************************************************************
|
||||
* @fn SystemCoreClockUpdate
|
||||
*
|
||||
* @brief Update SystemCoreClock variable according to Clock Register Values.
|
||||
*
|
||||
* @return none
|
||||
*/
|
||||
void SystemCoreClockUpdate (void)
|
||||
{
|
||||
uint32_t tmp = 0, pllmull = 0, pllsource = 0, Pll_6_5 = 0;
|
||||
|
||||
tmp = RCC->CFGR0 & RCC_SWS;
|
||||
|
||||
switch (tmp)
|
||||
{
|
||||
case 0x00:
|
||||
SystemCoreClock = HSI_VALUE;
|
||||
break;
|
||||
case 0x04:
|
||||
SystemCoreClock = HSE_VALUE;
|
||||
break;
|
||||
case 0x08:
|
||||
pllmull = RCC->CFGR0 & RCC_PLLMULL;
|
||||
pllsource = RCC->CFGR0 & RCC_PLLSRC;
|
||||
pllmull = ( pllmull >> 18) + 2;
|
||||
|
||||
if(pllmull == 17) pllmull = 18;
|
||||
|
||||
if (pllsource == 0x00)
|
||||
{
|
||||
if(EXTEN->EXTEN_CTR & EXTEN_PLL_HSI_PRE){
|
||||
SystemCoreClock = HSI_VALUE * pllmull;
|
||||
}
|
||||
else{
|
||||
SystemCoreClock = (HSI_VALUE >> 1) * pllmull;
|
||||
}
|
||||
}
|
||||
else
|
||||
{
|
||||
#if defined (CH32V20x_D8W)
|
||||
if((RCC->CFGR0 & (3<<22)) == (3<<22))
|
||||
{
|
||||
SystemCoreClock = ((HSE_VALUE>>1)) * pllmull;
|
||||
}
|
||||
else
|
||||
#endif
|
||||
if ((RCC->CFGR0 & RCC_PLLXTPRE) != (uint32_t)RESET)
|
||||
{
|
||||
#if defined (CH32V20x_D8) || defined (CH32V20x_D8W)
|
||||
SystemCoreClock = ((HSE_VALUE>>2) >> 1) * pllmull;
|
||||
#else
|
||||
SystemCoreClock = (HSE_VALUE >> 1) * pllmull;
|
||||
#endif
|
||||
}
|
||||
else
|
||||
{
|
||||
#if defined (CH32V20x_D8) || defined (CH32V20x_D8W)
|
||||
SystemCoreClock = (HSE_VALUE>>2) * pllmull;
|
||||
#else
|
||||
SystemCoreClock = HSE_VALUE * pllmull;
|
||||
#endif
|
||||
}
|
||||
}
|
||||
|
||||
if(Pll_6_5 == 1) SystemCoreClock = (SystemCoreClock / 2);
|
||||
|
||||
break;
|
||||
default:
|
||||
SystemCoreClock = HSI_VALUE;
|
||||
break;
|
||||
}
|
||||
|
||||
tmp = AHBPrescTable[((RCC->CFGR0 & RCC_HPRE) >> 4)];
|
||||
SystemCoreClock >>= tmp;
|
||||
}
|
||||
|
||||
/*********************************************************************
|
||||
* @fn SetSysClock
|
||||
*
|
||||
* @brief Configures the System clock frequency, HCLK, PCLK2 and PCLK1 prescalers.
|
||||
*
|
||||
* @return none
|
||||
*/
|
||||
static void SetSysClock(void)
|
||||
{
|
||||
#ifdef SYSCLK_FREQ_HSE
|
||||
SetSysClockToHSE();
|
||||
#elif defined SYSCLK_FREQ_48MHz_HSE
|
||||
SetSysClockTo48_HSE();
|
||||
#elif defined SYSCLK_FREQ_56MHz_HSE
|
||||
SetSysClockTo56_HSE();
|
||||
#elif defined SYSCLK_FREQ_72MHz_HSE
|
||||
SetSysClockTo72_HSE();
|
||||
#elif defined SYSCLK_FREQ_96MHz_HSE
|
||||
SetSysClockTo96_HSE();
|
||||
#elif defined SYSCLK_FREQ_120MHz_HSE
|
||||
SetSysClockTo120_HSE();
|
||||
#elif defined SYSCLK_FREQ_144MHz_HSE
|
||||
SetSysClockTo144_HSE();
|
||||
#elif defined SYSCLK_FREQ_48MHz_HSI
|
||||
SetSysClockTo48_HSI();
|
||||
#elif defined SYSCLK_FREQ_56MHz_HSI
|
||||
SetSysClockTo56_HSI();
|
||||
#elif defined SYSCLK_FREQ_72MHz_HSI
|
||||
SetSysClockTo72_HSI();
|
||||
#elif defined SYSCLK_FREQ_96MHz_HSI
|
||||
SetSysClockTo96_HSI();
|
||||
#elif defined SYSCLK_FREQ_120MHz_HSI
|
||||
SetSysClockTo120_HSI();
|
||||
#elif defined SYSCLK_FREQ_144MHz_HSI
|
||||
SetSysClockTo144_HSI();
|
||||
|
||||
#endif
|
||||
|
||||
/* If none of the define above is enabled, the HSI is used as System clock
|
||||
* source (default after reset)
|
||||
*/
|
||||
}
|
||||
|
||||
|
||||
#ifdef SYSCLK_FREQ_HSE
|
||||
|
||||
/*********************************************************************
|
||||
* @fn SetSysClockToHSE
|
||||
*
|
||||
* @brief Sets HSE as System clock source and configure HCLK, PCLK2 and PCLK1 prescalers.
|
||||
*
|
||||
* @return none
|
||||
*/
|
||||
static void SetSysClockToHSE(void)
|
||||
{
|
||||
__IO uint32_t StartUpCounter = 0, HSEStatus = 0;
|
||||
|
||||
|
||||
RCC->CTLR |= ((uint32_t)RCC_HSEON);
|
||||
|
||||
/* Wait till HSE is ready and if Time out is reached exit */
|
||||
do
|
||||
{
|
||||
HSEStatus = RCC->CTLR & RCC_HSERDY;
|
||||
StartUpCounter++;
|
||||
} while((HSEStatus == 0) && (StartUpCounter != HSE_STARTUP_TIMEOUT));
|
||||
|
||||
if ((RCC->CTLR & RCC_HSERDY) != RESET)
|
||||
{
|
||||
HSEStatus = (uint32_t)0x01;
|
||||
}
|
||||
else
|
||||
{
|
||||
HSEStatus = (uint32_t)0x00;
|
||||
}
|
||||
|
||||
if (HSEStatus == (uint32_t)0x01)
|
||||
{
|
||||
/* HCLK = SYSCLK */
|
||||
RCC->CFGR0 |= (uint32_t)RCC_HPRE_DIV1;
|
||||
/* PCLK2 = HCLK */
|
||||
RCC->CFGR0 |= (uint32_t)RCC_PPRE2_DIV1;
|
||||
/* PCLK1 = HCLK */
|
||||
RCC->CFGR0 |= (uint32_t)RCC_PPRE1_DIV1;
|
||||
|
||||
/* Select HSE as system clock source
|
||||
* CH32V20x_D6 (HSE=8MHZ)
|
||||
* CH32V20x_D8 (HSE=32MHZ)
|
||||
* CH32V20x_D8W (HSE=32MHZ)
|
||||
*/
|
||||
RCC->CFGR0 &= (uint32_t)((uint32_t)~(RCC_SW));
|
||||
RCC->CFGR0 |= (uint32_t)RCC_SW_HSE;
|
||||
|
||||
/* Wait till HSE is used as system clock source */
|
||||
while ((RCC->CFGR0 & (uint32_t)RCC_SWS) != (uint32_t)0x04)
|
||||
{
|
||||
}
|
||||
}
|
||||
else
|
||||
{
|
||||
/* If HSE fails to start-up, the application will have wrong clock
|
||||
* configuration. User can add here some code to deal with this error
|
||||
*/
|
||||
}
|
||||
}
|
||||
|
||||
#elif defined SYSCLK_FREQ_48MHz_HSE
|
||||
|
||||
/*********************************************************************
|
||||
* @fn SetSysClockTo48_HSE
|
||||
*
|
||||
* @brief Sets System clock frequency to 48MHz and configure HCLK, PCLK2 and PCLK1 prescalers.
|
||||
*
|
||||
* @return none
|
||||
*/
|
||||
static void SetSysClockTo48_HSE(void)
|
||||
{
|
||||
__IO uint32_t StartUpCounter = 0, HSEStatus = 0;
|
||||
|
||||
|
||||
RCC->CTLR |= ((uint32_t)RCC_HSEON);
|
||||
/* Wait till HSE is ready and if Time out is reached exit */
|
||||
do
|
||||
{
|
||||
HSEStatus = RCC->CTLR & RCC_HSERDY;
|
||||
StartUpCounter++;
|
||||
} while((HSEStatus == 0) && (StartUpCounter != HSE_STARTUP_TIMEOUT));
|
||||
|
||||
if ((RCC->CTLR & RCC_HSERDY) != RESET)
|
||||
{
|
||||
HSEStatus = (uint32_t)0x01;
|
||||
}
|
||||
else
|
||||
{
|
||||
HSEStatus = (uint32_t)0x00;
|
||||
}
|
||||
|
||||
if (HSEStatus == (uint32_t)0x01)
|
||||
{
|
||||
/* HCLK = SYSCLK */
|
||||
RCC->CFGR0 |= (uint32_t)RCC_HPRE_DIV1;
|
||||
/* PCLK2 = HCLK */
|
||||
RCC->CFGR0 |= (uint32_t)RCC_PPRE2_DIV1;
|
||||
/* PCLK1 = HCLK */
|
||||
RCC->CFGR0 |= (uint32_t)RCC_PPRE1_DIV2;
|
||||
|
||||
/* CH32V20x_D6-PLL configuration: PLLCLK = HSE * 6 = 48 MHz (HSE=8MHZ)
|
||||
* CH32V20x_D8-PLL configuration: PLLCLK = HSE/4 * 6 = 48 MHz (HSE=32MHZ)
|
||||
* CH32V20x_D8W-PLL configuration: PLLCLK = HSE/4 * 6 = 48 MHz (HSE=32MHZ)
|
||||
*/
|
||||
RCC->CFGR0 &= (uint32_t)((uint32_t)~(RCC_PLLSRC | RCC_PLLXTPRE | RCC_PLLMULL));
|
||||
|
||||
RCC->CFGR0 |= (uint32_t)(RCC_PLLSRC_HSE | RCC_PLLXTPRE_HSE | RCC_PLLMULL6);
|
||||
|
||||
/* Enable PLL */
|
||||
RCC->CTLR |= RCC_PLLON;
|
||||
/* Wait till PLL is ready */
|
||||
while((RCC->CTLR & RCC_PLLRDY) == 0)
|
||||
{
|
||||
}
|
||||
/* Select PLL as system clock source */
|
||||
RCC->CFGR0 &= (uint32_t)((uint32_t)~(RCC_SW));
|
||||
RCC->CFGR0 |= (uint32_t)RCC_SW_PLL;
|
||||
/* Wait till PLL is used as system clock source */
|
||||
while ((RCC->CFGR0 & (uint32_t)RCC_SWS) != (uint32_t)0x08)
|
||||
{
|
||||
}
|
||||
}
|
||||
else
|
||||
{
|
||||
/*
|
||||
* If HSE fails to start-up, the application will have wrong clock
|
||||
* configuration. User can add here some code to deal with this error
|
||||
*/
|
||||
}
|
||||
}
|
||||
|
||||
#elif defined SYSCLK_FREQ_56MHz_HSE
|
||||
|
||||
/*********************************************************************
|
||||
* @fn SetSysClockTo56_HSE
|
||||
*
|
||||
* @brief Sets System clock frequency to 56MHz and configure HCLK, PCLK2 and PCLK1 prescalers.
|
||||
*
|
||||
* @return none
|
||||
*/
|
||||
static void SetSysClockTo56_HSE(void)
|
||||
{
|
||||
__IO uint32_t StartUpCounter = 0, HSEStatus = 0;
|
||||
|
||||
RCC->CTLR |= ((uint32_t)RCC_HSEON);
|
||||
|
||||
/* Wait till HSE is ready and if Time out is reached exit */
|
||||
do
|
||||
{
|
||||
HSEStatus = RCC->CTLR & RCC_HSERDY;
|
||||
StartUpCounter++;
|
||||
} while((HSEStatus == 0) && (StartUpCounter != HSE_STARTUP_TIMEOUT));
|
||||
|
||||
if ((RCC->CTLR & RCC_HSERDY) != RESET)
|
||||
{
|
||||
HSEStatus = (uint32_t)0x01;
|
||||
}
|
||||
else
|
||||
{
|
||||
HSEStatus = (uint32_t)0x00;
|
||||
}
|
||||
|
||||
if (HSEStatus == (uint32_t)0x01)
|
||||
{
|
||||
/* HCLK = SYSCLK */
|
||||
RCC->CFGR0 |= (uint32_t)RCC_HPRE_DIV1;
|
||||
/* PCLK2 = HCLK */
|
||||
RCC->CFGR0 |= (uint32_t)RCC_PPRE2_DIV1;
|
||||
/* PCLK1 = HCLK */
|
||||
RCC->CFGR0 |= (uint32_t)RCC_PPRE1_DIV2;
|
||||
|
||||
|
||||
/* CH32V20x_D6-PLL configuration: PLLCLK = HSE * 7 = 56 MHz (HSE=8MHZ)
|
||||
* CH32V20x_D8-PLL configuration: PLLCLK = HSE/4 * 7 = 56 MHz (HSE=32MHZ)
|
||||
* CH32V20x_D8W-PLL configuration: PLLCLK = HSE/4 * 7 = 56 MHz (HSE=32MHZ)
|
||||
*/
|
||||
RCC->CFGR0 &= (uint32_t)((uint32_t)~(RCC_PLLSRC | RCC_PLLXTPRE | RCC_PLLMULL));
|
||||
|
||||
RCC->CFGR0 |= (uint32_t)(RCC_PLLSRC_HSE | RCC_PLLXTPRE_HSE | RCC_PLLMULL7);
|
||||
|
||||
/* Enable PLL */
|
||||
RCC->CTLR |= RCC_PLLON;
|
||||
/* Wait till PLL is ready */
|
||||
while((RCC->CTLR & RCC_PLLRDY) == 0)
|
||||
{
|
||||
}
|
||||
|
||||
/* Select PLL as system clock source */
|
||||
RCC->CFGR0 &= (uint32_t)((uint32_t)~(RCC_SW));
|
||||
RCC->CFGR0 |= (uint32_t)RCC_SW_PLL;
|
||||
/* Wait till PLL is used as system clock source */
|
||||
while ((RCC->CFGR0 & (uint32_t)RCC_SWS) != (uint32_t)0x08)
|
||||
{
|
||||
}
|
||||
}
|
||||
else
|
||||
{
|
||||
/*
|
||||
* If HSE fails to start-up, the application will have wrong clock
|
||||
* configuration. User can add here some code to deal with this error
|
||||
*/
|
||||
}
|
||||
}
|
||||
|
||||
#elif defined SYSCLK_FREQ_72MHz_HSE
|
||||
|
||||
/*********************************************************************
|
||||
* @fn SetSysClockTo72_HSE
|
||||
*
|
||||
* @brief Sets System clock frequency to 72MHz and configure HCLK, PCLK2 and PCLK1 prescalers.
|
||||
*
|
||||
* @return none
|
||||
*/
|
||||
static void SetSysClockTo72_HSE(void)
|
||||
{
|
||||
__IO uint32_t StartUpCounter = 0, HSEStatus = 0;
|
||||
|
||||
RCC->CTLR |= ((uint32_t)RCC_HSEON);
|
||||
|
||||
/* Wait till HSE is ready and if Time out is reached exit */
|
||||
do
|
||||
{
|
||||
HSEStatus = RCC->CTLR & RCC_HSERDY;
|
||||
StartUpCounter++;
|
||||
} while((HSEStatus == 0) && (StartUpCounter != HSE_STARTUP_TIMEOUT));
|
||||
|
||||
if ((RCC->CTLR & RCC_HSERDY) != RESET)
|
||||
{
|
||||
HSEStatus = (uint32_t)0x01;
|
||||
}
|
||||
else
|
||||
{
|
||||
HSEStatus = (uint32_t)0x00;
|
||||
}
|
||||
|
||||
if (HSEStatus == (uint32_t)0x01)
|
||||
{
|
||||
/* HCLK = SYSCLK */
|
||||
RCC->CFGR0 |= (uint32_t)RCC_HPRE_DIV1;
|
||||
/* PCLK2 = HCLK */
|
||||
RCC->CFGR0 |= (uint32_t)RCC_PPRE2_DIV1;
|
||||
/* PCLK1 = HCLK */
|
||||
RCC->CFGR0 |= (uint32_t)RCC_PPRE1_DIV2;
|
||||
|
||||
|
||||
/* CH32V20x_D6-PLL configuration: PLLCLK = HSE * 9 = 72 MHz (HSE=8MHZ)
|
||||
* CH32V20x_D8-PLL configuration: PLLCLK = HSE/4 * 9 = 72 MHz (HSE=32MHZ)
|
||||
* CH32V20x_D8W-PLL configuration: PLLCLK = HSE/4 * 9 = 72 MHz (HSE=32MHZ)
|
||||
*/
|
||||
RCC->CFGR0 &= (uint32_t)((uint32_t)~(RCC_PLLSRC | RCC_PLLXTPRE |
|
||||
RCC_PLLMULL));
|
||||
|
||||
RCC->CFGR0 |= (uint32_t)(RCC_PLLSRC_HSE | RCC_PLLXTPRE_HSE | RCC_PLLMULL9);
|
||||
|
||||
/* Enable PLL */
|
||||
RCC->CTLR |= RCC_PLLON;
|
||||
/* Wait till PLL is ready */
|
||||
while((RCC->CTLR & RCC_PLLRDY) == 0)
|
||||
{
|
||||
}
|
||||
/* Select PLL as system clock source */
|
||||
RCC->CFGR0 &= (uint32_t)((uint32_t)~(RCC_SW));
|
||||
RCC->CFGR0 |= (uint32_t)RCC_SW_PLL;
|
||||
/* Wait till PLL is used as system clock source */
|
||||
while ((RCC->CFGR0 & (uint32_t)RCC_SWS) != (uint32_t)0x08)
|
||||
{
|
||||
}
|
||||
}
|
||||
else
|
||||
{
|
||||
/*
|
||||
* If HSE fails to start-up, the application will have wrong clock
|
||||
* configuration. User can add here some code to deal with this error
|
||||
*/
|
||||
}
|
||||
}
|
||||
|
||||
|
||||
#elif defined SYSCLK_FREQ_96MHz_HSE
|
||||
|
||||
/*********************************************************************
|
||||
* @fn SetSysClockTo96_HSE
|
||||
*
|
||||
* @brief Sets System clock frequency to 96MHz and configure HCLK, PCLK2 and PCLK1 prescalers.
|
||||
*
|
||||
* @return none
|
||||
*/
|
||||
static void SetSysClockTo96_HSE(void)
|
||||
{
|
||||
__IO uint32_t StartUpCounter = 0, HSEStatus = 0;
|
||||
|
||||
RCC->CTLR |= ((uint32_t)RCC_HSEON);
|
||||
|
||||
/* Wait till HSE is ready and if Time out is reached exit */
|
||||
do
|
||||
{
|
||||
HSEStatus = RCC->CTLR & RCC_HSERDY;
|
||||
StartUpCounter++;
|
||||
} while((HSEStatus == 0) && (StartUpCounter != HSE_STARTUP_TIMEOUT));
|
||||
|
||||
if ((RCC->CTLR & RCC_HSERDY) != RESET)
|
||||
{
|
||||
HSEStatus = (uint32_t)0x01;
|
||||
}
|
||||
else
|
||||
{
|
||||
HSEStatus = (uint32_t)0x00;
|
||||
}
|
||||
|
||||
if (HSEStatus == (uint32_t)0x01)
|
||||
{
|
||||
/* HCLK = SYSCLK */
|
||||
RCC->CFGR0 |= (uint32_t)RCC_HPRE_DIV1;
|
||||
/* PCLK2 = HCLK */
|
||||
RCC->CFGR0 |= (uint32_t)RCC_PPRE2_DIV1;
|
||||
/* PCLK1 = HCLK */
|
||||
RCC->CFGR0 |= (uint32_t)RCC_PPRE1_DIV2;
|
||||
|
||||
|
||||
/* CH32V20x_D6-PLL configuration: PLLCLK = HSE * 12 = 96 MHz (HSE=8MHZ)
|
||||
* CH32V20x_D8-PLL configuration: PLLCLK = HSE/4 * 12 = 96 MHz (HSE=32MHZ)
|
||||
* CH32V20x_D8W-PLL configuration: PLLCLK = HSE/4 * 12 = 96 MHz (HSE=32MHZ)
|
||||
*/
|
||||
RCC->CFGR0 &= (uint32_t)((uint32_t)~(RCC_PLLSRC | RCC_PLLXTPRE |
|
||||
RCC_PLLMULL));
|
||||
|
||||
RCC->CFGR0 |= (uint32_t)(RCC_PLLSRC_HSE | RCC_PLLXTPRE_HSE | RCC_PLLMULL12);
|
||||
|
||||
/* Enable PLL */
|
||||
RCC->CTLR |= RCC_PLLON;
|
||||
/* Wait till PLL is ready */
|
||||
while((RCC->CTLR & RCC_PLLRDY) == 0)
|
||||
{
|
||||
}
|
||||
/* Select PLL as system clock source */
|
||||
RCC->CFGR0 &= (uint32_t)((uint32_t)~(RCC_SW));
|
||||
RCC->CFGR0 |= (uint32_t)RCC_SW_PLL;
|
||||
/* Wait till PLL is used as system clock source */
|
||||
while ((RCC->CFGR0 & (uint32_t)RCC_SWS) != (uint32_t)0x08)
|
||||
{
|
||||
}
|
||||
}
|
||||
else
|
||||
{
|
||||
/*
|
||||
* If HSE fails to start-up, the application will have wrong clock
|
||||
* configuration. User can add here some code to deal with this error
|
||||
*/
|
||||
}
|
||||
}
|
||||
|
||||
|
||||
#elif defined SYSCLK_FREQ_120MHz_HSE
|
||||
|
||||
/*********************************************************************
|
||||
* @fn SetSysClockTo120_HSE
|
||||
*
|
||||
* @brief Sets System clock frequency to 120MHz and configure HCLK, PCLK2 and PCLK1 prescalers.
|
||||
*
|
||||
* @return none
|
||||
*/
|
||||
static void SetSysClockTo120_HSE(void)
|
||||
{
|
||||
__IO uint32_t StartUpCounter = 0, HSEStatus = 0;
|
||||
|
||||
RCC->CTLR |= ((uint32_t)RCC_HSEON);
|
||||
|
||||
/* Wait till HSE is ready and if Time out is reached exit */
|
||||
do
|
||||
{
|
||||
HSEStatus = RCC->CTLR & RCC_HSERDY;
|
||||
StartUpCounter++;
|
||||
} while((HSEStatus == 0) && (StartUpCounter != HSE_STARTUP_TIMEOUT));
|
||||
|
||||
if((RCC->CTLR & RCC_HSERDY) != RESET)
|
||||
{
|
||||
HSEStatus = (uint32_t)0x01;
|
||||
}
|
||||
else
|
||||
{
|
||||
HSEStatus = (uint32_t)0x00;
|
||||
}
|
||||
|
||||
if(HSEStatus == (uint32_t)0x01)
|
||||
{
|
||||
#if defined (CH32V20x_D8W)
|
||||
RCC->CFGR0 |= (uint32_t)(3<<22);
|
||||
/* HCLK = SYSCLK/2 */
|
||||
RCC->CFGR0 |= (uint32_t)RCC_HPRE_DIV2;
|
||||
#else
|
||||
/* HCLK = SYSCLK */
|
||||
RCC->CFGR0 |= (uint32_t)RCC_HPRE_DIV1;
|
||||
#endif
|
||||
/* PCLK2 = HCLK */
|
||||
RCC->CFGR0 |= (uint32_t)RCC_PPRE2_DIV1;
|
||||
/* PCLK1 = HCLK */
|
||||
RCC->CFGR0 |= (uint32_t)RCC_PPRE1_DIV2;
|
||||
|
||||
/* CH32V20x_D6-PLL configuration: PLLCLK = HSE * 15 = 120 MHz (HSE=8MHZ)
|
||||
* CH32V20x_D8-PLL configuration: PLLCLK = HSE/4 * 15 = 120 MHz (HSE=32MHZ)
|
||||
* CH32V20x_D8W-PLL configuration: PLLCLK = HSE/2 * 15 = 240 MHz (HSE=32MHZ)
|
||||
*/
|
||||
RCC->CFGR0 &= (uint32_t)((uint32_t) ~(RCC_PLLSRC | RCC_PLLXTPRE |
|
||||
RCC_PLLMULL));
|
||||
|
||||
RCC->CFGR0 |= (uint32_t)(RCC_PLLSRC_HSE | RCC_PLLXTPRE_HSE | RCC_PLLMULL15);
|
||||
|
||||
/* Enable PLL */
|
||||
RCC->CTLR |= RCC_PLLON;
|
||||
/* Wait till PLL is ready */
|
||||
while((RCC->CTLR & RCC_PLLRDY) == 0)
|
||||
{
|
||||
}
|
||||
/* Select PLL as system clock source */
|
||||
RCC->CFGR0 &= (uint32_t)((uint32_t) ~(RCC_SW));
|
||||
RCC->CFGR0 |= (uint32_t)RCC_SW_PLL;
|
||||
/* Wait till PLL is used as system clock source */
|
||||
while((RCC->CFGR0 & (uint32_t)RCC_SWS) != (uint32_t)0x08)
|
||||
{
|
||||
}
|
||||
}
|
||||
else
|
||||
{
|
||||
/*
|
||||
* If HSE fails to start-up, the application will have wrong clock
|
||||
* configuration. User can add here some code to deal with this error
|
||||
*/
|
||||
}
|
||||
}
|
||||
#elif defined SYSCLK_FREQ_144MHz_HSE
|
||||
|
||||
/*********************************************************************
|
||||
* @fn SetSysClockTo144_HSE
|
||||
*
|
||||
* @brief Sets System clock frequency to 144MHz and configure HCLK, PCLK2 and PCLK1 prescalers.
|
||||
*
|
||||
* @return none
|
||||
*/
|
||||
static void SetSysClockTo144_HSE(void)
|
||||
{
|
||||
__IO uint32_t StartUpCounter = 0, HSEStatus = 0;
|
||||
|
||||
RCC->CTLR |= ((uint32_t)RCC_HSEON);
|
||||
|
||||
/* Wait till HSE is ready and if Time out is reached exit */
|
||||
do
|
||||
{
|
||||
HSEStatus = RCC->CTLR & RCC_HSERDY;
|
||||
StartUpCounter++;
|
||||
} while((HSEStatus == 0) && (StartUpCounter != HSE_STARTUP_TIMEOUT));
|
||||
|
||||
if ((RCC->CTLR & RCC_HSERDY) != RESET)
|
||||
{
|
||||
HSEStatus = (uint32_t)0x01;
|
||||
}
|
||||
else
|
||||
{
|
||||
HSEStatus = (uint32_t)0x00;
|
||||
}
|
||||
|
||||
if (HSEStatus == (uint32_t)0x01)
|
||||
{
|
||||
/* HCLK = SYSCLK */
|
||||
RCC->CFGR0 |= (uint32_t)RCC_HPRE_DIV1;
|
||||
/* PCLK2 = HCLK */
|
||||
RCC->CFGR0 |= (uint32_t)RCC_PPRE2_DIV1;
|
||||
/* PCLK1 = HCLK */
|
||||
RCC->CFGR0 |= (uint32_t)RCC_PPRE1_DIV2;
|
||||
|
||||
|
||||
/* CH32V20x_D6-PLL configuration: PLLCLK = HSE * 18 = 144 MHz (HSE=8MHZ)
|
||||
* CH32V20x_D8-PLL configuration: PLLCLK = HSE/4 * 18 = 144 MHz (HSE=32MHZ)
|
||||
* CH32V20x_D8W-PLL configuration: PLLCLK = HSE/4 * 18 = 144 MHz (HSE=32MHZ)
|
||||
*/
|
||||
RCC->CFGR0 &= (uint32_t)((uint32_t)~(RCC_PLLSRC | RCC_PLLXTPRE |
|
||||
RCC_PLLMULL));
|
||||
|
||||
RCC->CFGR0 |= (uint32_t)(RCC_PLLSRC_HSE | RCC_PLLXTPRE_HSE | RCC_PLLMULL18);
|
||||
|
||||
/* Enable PLL */
|
||||
RCC->CTLR |= RCC_PLLON;
|
||||
/* Wait till PLL is ready */
|
||||
while((RCC->CTLR & RCC_PLLRDY) == 0)
|
||||
{
|
||||
}
|
||||
/* Select PLL as system clock source */
|
||||
RCC->CFGR0 &= (uint32_t)((uint32_t)~(RCC_SW));
|
||||
RCC->CFGR0 |= (uint32_t)RCC_SW_PLL;
|
||||
/* Wait till PLL is used as system clock source */
|
||||
while ((RCC->CFGR0 & (uint32_t)RCC_SWS) != (uint32_t)0x08)
|
||||
{
|
||||
}
|
||||
}
|
||||
else
|
||||
{
|
||||
/*
|
||||
* If HSE fails to start-up, the application will have wrong clock
|
||||
* configuration. User can add here some code to deal with this error
|
||||
*/
|
||||
}
|
||||
}
|
||||
|
||||
#elif defined SYSCLK_FREQ_48MHz_HSI
|
||||
|
||||
/*********************************************************************
|
||||
* @fn SetSysClockTo48_HSI
|
||||
*
|
||||
* @brief Sets System clock frequency to 48MHz and configure HCLK, PCLK2 and PCLK1 prescalers.
|
||||
*
|
||||
* @return none
|
||||
*/
|
||||
static void SetSysClockTo48_HSI(void)
|
||||
{
|
||||
EXTEN->EXTEN_CTR |= EXTEN_PLL_HSI_PRE;
|
||||
|
||||
/* HCLK = SYSCLK */
|
||||
RCC->CFGR0 |= (uint32_t)RCC_HPRE_DIV1;
|
||||
/* PCLK2 = HCLK */
|
||||
RCC->CFGR0 |= (uint32_t)RCC_PPRE2_DIV1;
|
||||
/* PCLK1 = HCLK */
|
||||
RCC->CFGR0 |= (uint32_t)RCC_PPRE1_DIV2;
|
||||
|
||||
/* PLL configuration: PLLCLK = HSI * 6 = 48 MHz */
|
||||
RCC->CFGR0 &= (uint32_t)((uint32_t)~(RCC_PLLSRC | RCC_PLLXTPRE | RCC_PLLMULL));
|
||||
|
||||
RCC->CFGR0 |= (uint32_t)(RCC_PLLSRC_HSI_Div2 | RCC_PLLMULL6);
|
||||
|
||||
/* Enable PLL */
|
||||
RCC->CTLR |= RCC_PLLON;
|
||||
/* Wait till PLL is ready */
|
||||
while((RCC->CTLR & RCC_PLLRDY) == 0)
|
||||
{
|
||||
}
|
||||
/* Select PLL as system clock source */
|
||||
RCC->CFGR0 &= (uint32_t)((uint32_t)~(RCC_SW));
|
||||
RCC->CFGR0 |= (uint32_t)RCC_SW_PLL;
|
||||
/* Wait till PLL is used as system clock source */
|
||||
while ((RCC->CFGR0 & (uint32_t)RCC_SWS) != (uint32_t)0x08)
|
||||
{
|
||||
}
|
||||
}
|
||||
|
||||
#elif defined SYSCLK_FREQ_56MHz_HSI
|
||||
|
||||
/*********************************************************************
|
||||
* @fn SetSysClockTo56_HSI
|
||||
*
|
||||
* @brief Sets System clock frequency to 56MHz and configure HCLK, PCLK2 and PCLK1 prescalers.
|
||||
*
|
||||
* @return none
|
||||
*/
|
||||
static void SetSysClockTo56_HSI(void)
|
||||
{
|
||||
EXTEN->EXTEN_CTR |= EXTEN_PLL_HSI_PRE;
|
||||
|
||||
/* HCLK = SYSCLK */
|
||||
RCC->CFGR0 |= (uint32_t)RCC_HPRE_DIV1;
|
||||
/* PCLK2 = HCLK */
|
||||
RCC->CFGR0 |= (uint32_t)RCC_PPRE2_DIV1;
|
||||
/* PCLK1 = HCLK */
|
||||
RCC->CFGR0 |= (uint32_t)RCC_PPRE1_DIV2;
|
||||
|
||||
/* PLL configuration: PLLCLK = HSI * 7 = 48 MHz */
|
||||
RCC->CFGR0 &= (uint32_t)((uint32_t)~(RCC_PLLSRC | RCC_PLLXTPRE | RCC_PLLMULL));
|
||||
|
||||
RCC->CFGR0 |= (uint32_t)(RCC_PLLSRC_HSI_Div2 | RCC_PLLMULL7);
|
||||
|
||||
/* Enable PLL */
|
||||
RCC->CTLR |= RCC_PLLON;
|
||||
/* Wait till PLL is ready */
|
||||
while((RCC->CTLR & RCC_PLLRDY) == 0)
|
||||
{
|
||||
}
|
||||
/* Select PLL as system clock source */
|
||||
RCC->CFGR0 &= (uint32_t)((uint32_t)~(RCC_SW));
|
||||
RCC->CFGR0 |= (uint32_t)RCC_SW_PLL;
|
||||
/* Wait till PLL is used as system clock source */
|
||||
while ((RCC->CFGR0 & (uint32_t)RCC_SWS) != (uint32_t)0x08)
|
||||
{
|
||||
}
|
||||
}
|
||||
|
||||
#elif defined SYSCLK_FREQ_72MHz_HSI
|
||||
|
||||
/*********************************************************************
|
||||
* @fn SetSysClockTo72_HSI
|
||||
*
|
||||
* @brief Sets System clock frequency to 72MHz and configure HCLK, PCLK2 and PCLK1 prescalers.
|
||||
*
|
||||
* @return none
|
||||
*/
|
||||
static void SetSysClockTo72_HSI(void)
|
||||
{
|
||||
EXTEN->EXTEN_CTR |= EXTEN_PLL_HSI_PRE;
|
||||
|
||||
/* HCLK = SYSCLK */
|
||||
RCC->CFGR0 |= (uint32_t)RCC_HPRE_DIV1;
|
||||
/* PCLK2 = HCLK */
|
||||
RCC->CFGR0 |= (uint32_t)RCC_PPRE2_DIV1;
|
||||
/* PCLK1 = HCLK */
|
||||
RCC->CFGR0 |= (uint32_t)RCC_PPRE1_DIV2;
|
||||
|
||||
/* PLL configuration: PLLCLK = HSI * 9 = 72 MHz */
|
||||
RCC->CFGR0 &= (uint32_t)((uint32_t)~(RCC_PLLSRC | RCC_PLLXTPRE | RCC_PLLMULL));
|
||||
|
||||
RCC->CFGR0 |= (uint32_t)(RCC_PLLSRC_HSI_Div2 | RCC_PLLMULL9);
|
||||
|
||||
/* Enable PLL */
|
||||
RCC->CTLR |= RCC_PLLON;
|
||||
/* Wait till PLL is ready */
|
||||
while((RCC->CTLR & RCC_PLLRDY) == 0)
|
||||
{
|
||||
}
|
||||
/* Select PLL as system clock source */
|
||||
RCC->CFGR0 &= (uint32_t)((uint32_t)~(RCC_SW));
|
||||
RCC->CFGR0 |= (uint32_t)RCC_SW_PLL;
|
||||
/* Wait till PLL is used as system clock source */
|
||||
while ((RCC->CFGR0 & (uint32_t)RCC_SWS) != (uint32_t)0x08)
|
||||
{
|
||||
}
|
||||
}
|
||||
|
||||
|
||||
#elif defined SYSCLK_FREQ_96MHz_HSI
|
||||
|
||||
/*********************************************************************
|
||||
* @fn SetSysClockTo96_HSI
|
||||
*
|
||||
* @brief Sets System clock frequency to 96MHz and configure HCLK, PCLK2 and PCLK1 prescalers.
|
||||
*
|
||||
* @return none
|
||||
*/
|
||||
static void SetSysClockTo96_HSI(void)
|
||||
{
|
||||
EXTEN->EXTEN_CTR |= EXTEN_PLL_HSI_PRE;
|
||||
|
||||
/* HCLK = SYSCLK */
|
||||
RCC->CFGR0 |= (uint32_t)RCC_HPRE_DIV1;
|
||||
/* PCLK2 = HCLK */
|
||||
RCC->CFGR0 |= (uint32_t)RCC_PPRE2_DIV1;
|
||||
/* PCLK1 = HCLK */
|
||||
RCC->CFGR0 |= (uint32_t)RCC_PPRE1_DIV2;
|
||||
|
||||
/* PLL configuration: PLLCLK = HSI * 12 = 96 MHz */
|
||||
RCC->CFGR0 &= (uint32_t)((uint32_t)~(RCC_PLLSRC | RCC_PLLXTPRE | RCC_PLLMULL));
|
||||
|
||||
RCC->CFGR0 |= (uint32_t)(RCC_PLLSRC_HSI_Div2 | RCC_PLLMULL12);
|
||||
|
||||
/* Enable PLL */
|
||||
RCC->CTLR |= RCC_PLLON;
|
||||
/* Wait till PLL is ready */
|
||||
while((RCC->CTLR & RCC_PLLRDY) == 0)
|
||||
{
|
||||
}
|
||||
/* Select PLL as system clock source */
|
||||
RCC->CFGR0 &= (uint32_t)((uint32_t)~(RCC_SW));
|
||||
RCC->CFGR0 |= (uint32_t)RCC_SW_PLL;
|
||||
/* Wait till PLL is used as system clock source */
|
||||
while ((RCC->CFGR0 & (uint32_t)RCC_SWS) != (uint32_t)0x08)
|
||||
{
|
||||
}
|
||||
}
|
||||
|
||||
|
||||
#elif defined SYSCLK_FREQ_120MHz_HSI
|
||||
|
||||
/*********************************************************************
|
||||
* @fn SetSysClockTo120_HSI
|
||||
*
|
||||
* @brief Sets System clock frequency to 120MHz and configure HCLK, PCLK2 and PCLK1 prescalers.
|
||||
*
|
||||
* @return none
|
||||
*/
|
||||
static void SetSysClockTo120_HSI(void)
|
||||
{
|
||||
EXTEN->EXTEN_CTR |= EXTEN_PLL_HSI_PRE;
|
||||
|
||||
/* HCLK = SYSCLK */
|
||||
RCC->CFGR0 |= (uint32_t)RCC_HPRE_DIV1;
|
||||
/* PCLK2 = HCLK */
|
||||
RCC->CFGR0 |= (uint32_t)RCC_PPRE2_DIV1;
|
||||
/* PCLK1 = HCLK */
|
||||
RCC->CFGR0 |= (uint32_t)RCC_PPRE1_DIV2;
|
||||
|
||||
/* PLL configuration: PLLCLK = HSI * 15 = 120 MHz */
|
||||
RCC->CFGR0 &= (uint32_t)((uint32_t) ~(RCC_PLLSRC | RCC_PLLXTPRE |
|
||||
RCC_PLLMULL));
|
||||
|
||||
RCC->CFGR0 |= (uint32_t)(RCC_PLLSRC_HSI_Div2 | RCC_PLLMULL15);
|
||||
|
||||
/* Enable PLL */
|
||||
RCC->CTLR |= RCC_PLLON;
|
||||
/* Wait till PLL is ready */
|
||||
while((RCC->CTLR & RCC_PLLRDY) == 0)
|
||||
{
|
||||
}
|
||||
/* Select PLL as system clock source */
|
||||
RCC->CFGR0 &= (uint32_t)((uint32_t) ~(RCC_SW));
|
||||
RCC->CFGR0 |= (uint32_t)RCC_SW_PLL;
|
||||
/* Wait till PLL is used as system clock source */
|
||||
while((RCC->CFGR0 & (uint32_t)RCC_SWS) != (uint32_t)0x08)
|
||||
{
|
||||
}
|
||||
}
|
||||
#elif defined SYSCLK_FREQ_144MHz_HSI
|
||||
|
||||
/*********************************************************************
|
||||
* @fn SetSysClockTo144_HSI
|
||||
*
|
||||
* @brief Sets System clock frequency to 144MHz and configure HCLK, PCLK2 and PCLK1 prescalers.
|
||||
*
|
||||
* @return none
|
||||
*/
|
||||
static void SetSysClockTo144_HSI(void)
|
||||
{
|
||||
EXTEN->EXTEN_CTR |= EXTEN_PLL_HSI_PRE;
|
||||
|
||||
/* HCLK = SYSCLK */
|
||||
RCC->CFGR0 |= (uint32_t)RCC_HPRE_DIV1;
|
||||
/* PCLK2 = HCLK */
|
||||
RCC->CFGR0 |= (uint32_t)RCC_PPRE2_DIV1;
|
||||
/* PCLK1 = HCLK */
|
||||
RCC->CFGR0 |= (uint32_t)RCC_PPRE1_DIV2;
|
||||
|
||||
/* PLL configuration: PLLCLK = HSI * 18 = 144 MHz */
|
||||
RCC->CFGR0 &= (uint32_t)((uint32_t)~(RCC_PLLSRC | RCC_PLLXTPRE | RCC_PLLMULL));
|
||||
|
||||
RCC->CFGR0 |= (uint32_t)(RCC_PLLSRC_HSI_Div2 | RCC_PLLMULL18);
|
||||
|
||||
/* Enable PLL */
|
||||
RCC->CTLR |= RCC_PLLON;
|
||||
/* Wait till PLL is ready */
|
||||
while((RCC->CTLR & RCC_PLLRDY) == 0)
|
||||
{
|
||||
}
|
||||
/* Select PLL as system clock source */
|
||||
RCC->CFGR0 &= (uint32_t)((uint32_t)~(RCC_SW));
|
||||
RCC->CFGR0 |= (uint32_t)RCC_SW_PLL;
|
||||
/* Wait till PLL is used as system clock source */
|
||||
while ((RCC->CFGR0 & (uint32_t)RCC_SWS) != (uint32_t)0x08)
|
||||
{
|
||||
}
|
||||
}
|
||||
|
||||
|
||||
#endif
|
||||
@@ -0,0 +1,32 @@
|
||||
/********************************** (C) COPYRIGHT *******************************
|
||||
* File Name : system_ch32v20x.h
|
||||
* Author : WCH
|
||||
* Version : V1.0.0
|
||||
* Date : 2021/06/06
|
||||
* Description : CH32V20x Device Peripheral Access Layer System Header File.
|
||||
*********************************************************************************
|
||||
* Copyright (c) 2021 Nanjing Qinheng Microelectronics Co., Ltd.
|
||||
* Attention: This software (modified or not) and binary are used for
|
||||
* microcontroller manufactured by Nanjing Qinheng Microelectronics.
|
||||
*******************************************************************************/
|
||||
#ifndef __SYSTEM_ch32v20x_H
|
||||
#define __SYSTEM_ch32v20x_H
|
||||
|
||||
#ifdef __cplusplus
|
||||
extern "C" {
|
||||
#endif
|
||||
|
||||
extern uint32_t SystemCoreClock; /* System Clock Frequency (Core Clock) */
|
||||
|
||||
/* System_Exported_Functions */
|
||||
extern void SystemInit(void);
|
||||
extern void SystemCoreClockUpdate(void);
|
||||
|
||||
#ifdef __cplusplus
|
||||
}
|
||||
#endif
|
||||
|
||||
#endif /*__CH32V20x_SYSTEM_H */
|
||||
|
||||
|
||||
|
||||
Reference in New Issue
Block a user