V2.0
This commit is contained in:
qiyongshuang
+189
-189
@@ -1,17 +1,17 @@
|
||||
/********************************** (C) COPYRIGHT *******************************
|
||||
* File Name : ch32v20x_usbotg_device.h
|
||||
* File Name : ch32v20x_usbfs_device.h
|
||||
* Author : WCH
|
||||
* Version : V1.0.0
|
||||
* Date : 2021/06/06
|
||||
* Description : This file contains all the functions prototypes for the
|
||||
* USBOTG firmware library.
|
||||
* USBFS firmware library.
|
||||
*********************************************************************************
|
||||
* Copyright (c) 2021 Nanjing Qinheng Microelectronics Co., Ltd.
|
||||
* Attention: This software (modified or not) and binary are used for
|
||||
* microcontroller manufactured by Nanjing Qinheng Microelectronics.
|
||||
*******************************************************************************/
|
||||
#ifndef __CH32V20X_USBOTG_DEVICE_H_
|
||||
#define __CH32V20X_USBOTG_DEVICE_H_
|
||||
#ifndef __CH32V20X_USBFS_DEVICE_H_
|
||||
#define __CH32V20X_USBFS_DEVICE_H_
|
||||
|
||||
#include "debug.h"
|
||||
#include "string.h"
|
||||
@@ -390,19 +390,19 @@ typedef struct __PACKED _UDISK_BOC_CSW {/* status of BulkOnly USB-FlashDisk */
|
||||
|
||||
/* 控制性宏定义 */
|
||||
#define USE_SYS_CLK 0
|
||||
//#define USBHD_HOST 0
|
||||
//#define USBFS_HOST 0
|
||||
//#define USB_OTG 0
|
||||
|
||||
/******************************************************************************/
|
||||
/* USBOTG_FS DEVICE USB_CONTROL */
|
||||
/* USBFS DEVICE USB_CONTROL */
|
||||
/* BASE USB_CTRL */
|
||||
#define USBHD_BASE_CTRL (USBOTG_FS->BASE_CTRL) // USB base control
|
||||
#define USBHD_UC_HOST_MODE 0x80 // enable USB host mode: 0=device mode, 1=host mode
|
||||
#define USBHD_UC_LOW_SPEED 0x40 // enable USB low speed: 0=12Mbps, 1=1.5Mbps
|
||||
#define USBHD_UC_DEV_PU_EN 0x20 // USB device enable and internal pullup resistance enable
|
||||
#define USBHD_UC_SYS_CTRL1 0x20 // USB system control high bit
|
||||
#define USBHD_UC_SYS_CTRL0 0x10 // USB system control low bit
|
||||
#define USBHD_UC_SYS_CTRL_MASK 0x30 // bit mask of USB system control
|
||||
#define USBFS_BASE_CTRL (USBFSD_FS->BASE_CTRL) // USB base control
|
||||
#define USBFS_UC_HOST_MODE 0x80 // enable USB host mode: 0=device mode, 1=host mode
|
||||
#define USBFS_UC_LOW_SPEED 0x40 // enable USB low speed: 0=12Mbps, 1=1.5Mbps
|
||||
#define USBFS_UC_DEV_PU_EN 0x20 // USB device enable and internal pullup resistance enable
|
||||
#define USBFS_UC_SYS_CTRL1 0x20 // USB system control high bit
|
||||
#define USBFS_UC_SYS_CTRL0 0x10 // USB system control low bit
|
||||
#define USBFS_UC_SYS_CTRL_MASK 0x30 // bit mask of USB system control
|
||||
// UC_HOST_MODE & UC_SYS_CTRL1 & UC_SYS_CTRL0: USB system control
|
||||
// 0 00: disable USB device and disable internal pullup resistance
|
||||
// 0 01: enable USB device and disable internal pullup resistance, need external pullup resistance
|
||||
@@ -411,79 +411,79 @@ typedef struct __PACKED _UDISK_BOC_CSW {/* status of BulkOnly USB-FlashDisk */
|
||||
// 1 01: enable USB host and force UDP/UDM output SE0 state
|
||||
// 1 10: enable USB host and force UDP/UDM output J state
|
||||
// 1 11: enable USB host and force UDP/UDM output resume or K state
|
||||
#define USBHD_UC_INT_BUSY 0x08 // enable automatic responding busy for device mode or automatic pause for host mode during interrupt flag UIF_TRANSFER valid
|
||||
#define USBHD_UC_RESET_SIE 0x04 // force reset USB SIE, need software clear
|
||||
#define USBHD_UC_CLR_ALL 0x02 // force clear FIFO and count of USB
|
||||
#define USBHD_UC_DMA_EN 0x01 // DMA enable and DMA interrupt enable for USB
|
||||
#define USBFS_UC_INT_BUSY 0x08 // enable automatic responding busy for device mode or automatic pause for host mode during interrupt flag UIF_TRANSFER valid
|
||||
#define USBFS_UC_RESET_SIE 0x04 // force reset USB SIE, need software clear
|
||||
#define USBFS_UC_CLR_ALL 0x02 // force clear FIFO and count of USB
|
||||
#define USBFS_UC_DMA_EN 0x01 // DMA enable and DMA interrupt enable for USB
|
||||
/* DEVICE USB_CTRL */
|
||||
#define USBHD_UDEV_CTRL (USBOTG_FS->UDEV_CTRL) // USB device physical prot control
|
||||
#define USBHD_UD_PD_DIS 0x80 // disable USB UDP/UDM pulldown resistance: 0=enable pulldown, 1=disable
|
||||
#define USBHD_UD_DP_PIN 0x20 // ReadOnly: indicate current UDP pin level
|
||||
#define USBHD_UD_DM_PIN 0x10 // ReadOnly: indicate current UDM pin level
|
||||
#define USBHD_UD_LOW_SPEED 0x04 // enable USB physical port low speed: 0=full speed, 1=low speed
|
||||
#define USBHD_UD_GP_BIT 0x02 // general purpose bit
|
||||
#define USBHD_UD_PORT_EN 0x01 // enable USB physical port I/O: 0=disable, 1=enable
|
||||
#define USBFS_UDEV_CTRL (USBFSD_FS->UDEV_CTRL) // USB device physical prot control
|
||||
#define USBFS_UD_PD_DIS 0x80 // disable USB UDP/UDM pulldown resistance: 0=enable pulldown, 1=disable
|
||||
#define USBFS_UD_DP_PIN 0x20 // ReadOnly: indicate current UDP pin level
|
||||
#define USBFS_UD_DM_PIN 0x10 // ReadOnly: indicate current UDM pin level
|
||||
#define USBFS_UD_LOW_SPEED 0x04 // enable USB physical port low speed: 0=full speed, 1=low speed
|
||||
#define USBFS_UD_GP_BIT 0x02 // general purpose bit
|
||||
#define USBFS_UD_PORT_EN 0x01 // enable USB physical port I/O: 0=disable, 1=enable
|
||||
/* USB INT EN */
|
||||
#define USBHD_INT_EN (USBOTG_FS->INT_EN) // USB interrupt enable
|
||||
#define USBHD_UIE_DEV_SOF 0x80 // enable interrupt for SOF received for USB device mode
|
||||
#define USBHD_UIE_DEV_NAK 0x40 // enable interrupt for NAK responded for USB device mode
|
||||
#define USBHD_UIE_FIFO_OV 0x10 // enable interrupt for FIFO overflow
|
||||
#define USBHD_UIE_HST_SOF 0x08 // enable interrupt for host SOF timer action for USB host mode
|
||||
#define USBHD_UIE_SUSPEND 0x04 // enable interrupt for USB suspend or resume event
|
||||
#define USBHD_UIE_TRANSFER 0x02 // enable interrupt for USB transfer completion
|
||||
#define USBHD_UIE_DETECT 0x01 // enable interrupt for USB device detected event for USB host mode
|
||||
#define USBHD_UIE_BUS_RST 0x01 // enable interrupt for USB bus reset event for USB device mode
|
||||
#define USBFS_INT_EN (USBFSD_FS->INT_EN) // USB interrupt enable
|
||||
#define USBFS_UIE_DEV_SOF 0x80 // enable interrupt for SOF received for USB device mode
|
||||
#define USBFS_UIE_DEV_NAK 0x40 // enable interrupt for NAK responded for USB device mode
|
||||
#define USBFS_UIE_FIFO_OV 0x10 // enable interrupt for FIFO overflow
|
||||
#define USBFS_UIE_HST_SOF 0x08 // enable interrupt for host SOF timer action for USB host mode
|
||||
#define USBFS_UIE_SUSPEND 0x04 // enable interrupt for USB suspend or resume event
|
||||
#define USBFS_UIE_TRANSFER 0x02 // enable interrupt for USB transfer completion
|
||||
#define USBFS_UIE_DETECT 0x01 // enable interrupt for USB device detected event for USB host mode
|
||||
#define USBFS_UIE_BUS_RST 0x01 // enable interrupt for USB bus reset event for USB device mode
|
||||
/* USB_DEV_ADDR */
|
||||
#define USBHD_DEV_ADDR (USBOTG_FS->DEV_ADDR) // USB device address
|
||||
#define USBHD_UDA_GP_BIT 0x80 // general purpose bit
|
||||
#define USBHD_USB_ADDR_MASK 0x7F // bit mask for USB device address
|
||||
/* USBOTG_FS DEVICE USB_STATUS */
|
||||
#define USBFS_DEV_ADDR (USBFSD_FS->DEV_ADDR) // USB device address
|
||||
#define USBFS_UDA_GP_BIT 0x80 // general purpose bit
|
||||
#define USBFS_USB_ADDR_MASK 0x7F // bit mask for USB device address
|
||||
/* USBFSD_FS DEVICE USB_STATUS */
|
||||
/* USB_MIS_ST */
|
||||
#define USBHD_MIS_ST (USBOTG_FS->MIS_ST) // USB miscellaneous status
|
||||
#define USBHD_UMS_SOF_PRES 0x80 // RO, indicate host SOF timer presage status
|
||||
#define USBHD_UMS_SOF_ACT 0x40 // RO, indicate host SOF timer action status for USB host
|
||||
#define USBHD_UMS_SIE_FREE 0x20 // RO, indicate USB SIE free status
|
||||
#define USBHD_UMS_R_FIFO_RDY 0x10 // RO, indicate USB receiving FIFO ready status (not empty)
|
||||
#define USBHD_UMS_BUS_RESET 0x08 // RO, indicate USB bus reset status
|
||||
#define USBHD_UMS_SUSPEND 0x04 // RO, indicate USB suspend status
|
||||
#define USBHD_UMS_DM_LEVEL 0x02 // RO, indicate UDM level saved at device attached to USB host
|
||||
#define USBHD_UMS_DEV_ATTACH 0x01 // RO, indicate device attached status on USB host
|
||||
#define USBFS_MIS_ST (USBFSD_FS->MIS_ST) // USB miscellaneous status
|
||||
#define USBFS_UMS_SOF_PRES 0x80 // RO, indicate host SOF timer presage status
|
||||
#define USBFS_UMS_SOF_ACT 0x40 // RO, indicate host SOF timer action status for USB host
|
||||
#define USBFS_UMS_SIE_FREE 0x20 // RO, indicate USB SIE free status
|
||||
#define USBFS_UMS_R_FIFO_RDY 0x10 // RO, indicate USB receiving FIFO ready status (not empty)
|
||||
#define USBFS_UMS_BUS_RESET 0x08 // RO, indicate USB bus reset status
|
||||
#define USBFS_UMS_SUSPEND 0x04 // RO, indicate USB suspend status
|
||||
#define USBFS_UMS_DM_LEVEL 0x02 // RO, indicate UDM level saved at device attached to USB host
|
||||
#define USBFS_UMS_DEV_ATTACH 0x01 // RO, indicate device attached status on USB host
|
||||
/* USB_INT_FG */
|
||||
#define USBHD_INT_FG (USBOTG_FS->INT_FG) // USB interrupt flag
|
||||
#define USBHD_U_IS_NAK 0x80 // RO, indicate current USB transfer is NAK received
|
||||
#define USBHD_U_TOG_OK 0x40 // RO, indicate current USB transfer toggle is OK
|
||||
#define USBHD_U_SIE_FREE 0x20 // RO, indicate USB SIE free status
|
||||
#define USBHD_UIF_FIFO_OV 0x10 // FIFO overflow interrupt flag for USB, direct bit address clear or write 1 to clear
|
||||
#define USBHD_UIF_HST_SOF 0x08 // host SOF timer interrupt flag for USB host, direct bit address clear or write 1 to clear
|
||||
#define USBHD_UIF_SUSPEND 0x04 // USB suspend or resume event interrupt flag, direct bit address clear or write 1 to clear
|
||||
#define USBHD_UIF_TRANSFER 0x02 // USB transfer completion interrupt flag, direct bit address clear or write 1 to clear
|
||||
#define USBHD_UIF_DETECT 0x01 // device detected event interrupt flag for USB host mode, direct bit address clear or write 1 to clear
|
||||
#define USBHD_UIF_BUS_RST 0x01 // bus reset event interrupt flag for USB device mode, direct bit address clear or write 1 to clear
|
||||
#define USBFS_INT_FG (USBFSD_FS->INT_FG) // USB interrupt flag
|
||||
#define USBFS_U_IS_NAK 0x80 // RO, indicate current USB transfer is NAK received
|
||||
#define USBFS_U_TOG_OK 0x40 // RO, indicate current USB transfer toggle is OK
|
||||
#define USBFS_U_SIE_FREE 0x20 // RO, indicate USB SIE free status
|
||||
#define USBFS_UIF_FIFO_OV 0x10 // FIFO overflow interrupt flag for USB, direct bit address clear or write 1 to clear
|
||||
#define USBFS_UIF_HST_SOF 0x08 // host SOF timer interrupt flag for USB host, direct bit address clear or write 1 to clear
|
||||
#define USBFS_UIF_SUSPEND 0x04 // USB suspend or resume event interrupt flag, direct bit address clear or write 1 to clear
|
||||
#define USBFS_UIF_TRANSFER 0x02 // USB transfer completion interrupt flag, direct bit address clear or write 1 to clear
|
||||
#define USBFS_UIF_DETECT 0x01 // device detected event interrupt flag for USB host mode, direct bit address clear or write 1 to clear
|
||||
#define USBFS_UIF_BUS_RST 0x01 // bus reset event interrupt flag for USB device mode, direct bit address clear or write 1 to clear
|
||||
/* USB_INT_ST */
|
||||
#define USBHD_INT_ST (USBOTG_FS->INT_ST) // USB interrupt flag
|
||||
#define USBHD_UIS_IS_SETUP 0x80 // RO, indicate current USB transfer is setup received for USB device mode
|
||||
#define USBHD_UIS_IS_NAK 0x80 // RO, indicate current USB transfer is NAK received for USB device mode
|
||||
#define USBHD_UIS_TOG_OK 0x40 // RO, indicate current USB transfer toggle is OK
|
||||
#define USBHD_UIS_TOKEN1 0x20 // RO, current token PID code bit 1 received for USB device mode
|
||||
#define USBHD_UIS_TOKEN0 0x10 // RO, current token PID code bit 0 received for USB device mode
|
||||
#define USBHD_UIS_TOKEN_MASK 0x30 // RO, bit mask of current token PID code received for USB device mode
|
||||
#define USBHD_UIS_TOKEN_OUT 0x00
|
||||
#define USBHD_UIS_TOKEN_SOF 0x10
|
||||
#define USBHD_UIS_TOKEN_IN 0x20
|
||||
#define USBHD_UIS_TOKEN_SETUP 0x30
|
||||
#define USBFS_INT_ST (USBFSD_FS->INT_ST) // USB interrupt flag
|
||||
#define USBFS_UIS_IS_SETUP 0x80 // RO, indicate current USB transfer is setup received for USB device mode
|
||||
#define USBFS_UIS_IS_NAK 0x80 // RO, indicate current USB transfer is NAK received for USB device mode
|
||||
#define USBFS_UIS_TOG_OK 0x40 // RO, indicate current USB transfer toggle is OK
|
||||
#define USBFS_UIS_TOKEN1 0x20 // RO, current token PID code bit 1 received for USB device mode
|
||||
#define USBFS_UIS_TOKEN0 0x10 // RO, current token PID code bit 0 received for USB device mode
|
||||
#define USBFS_UIS_TOKEN_MASK 0x30 // RO, bit mask of current token PID code received for USB device mode
|
||||
#define USBFS_UIS_TOKEN_OUT 0x00
|
||||
#define USBFS_UIS_TOKEN_SOF 0x10
|
||||
#define USBFS_UIS_TOKEN_IN 0x20
|
||||
#define USBFS_UIS_TOKEN_SETUP 0x30
|
||||
// UIS_TOKEN1 & UIS_TOKEN0: current token PID code received for USB device mode
|
||||
// 00: OUT token PID received
|
||||
// 01: SOF token PID received
|
||||
// 10: IN token PID received
|
||||
// 11: SETUP token PID received
|
||||
#define USBHD_UIS_ENDP_MASK 0x0F // RO, bit mask of current transfer endpoint number for USB device mode
|
||||
#define USBFS_UIS_ENDP_MASK 0x0F // RO, bit mask of current transfer endpoint number for USB device mode
|
||||
/* USB_RX_LEN */
|
||||
#define USBHD_RX_LEN (USBOTG_FS->Rx_Len) // USB receiving length
|
||||
#define USBFS_RX_LEN (USBFSD_FS->Rx_Len) // USB receiving length
|
||||
/* USB_BUF_MOD */
|
||||
#define USBHD_UEP4_1_MOD (USBOTG_FS->UEP4_1_MOD) // endpoint 4/1 mode
|
||||
#define USBHD_UEP1_RX_EN 0x80 // enable USB endpoint 1 receiving (OUT)
|
||||
#define USBHD_UEP1_TX_EN 0x40 // enable USB endpoint 1 transmittal (IN)
|
||||
#define USBHD_UEP1_BUF_MOD 0x10 // buffer mode of USB endpoint 1
|
||||
#define USBFS_UEP4_1_MOD (USBFSD_FS->UEP4_1_MOD) // endpoint 4/1 mode
|
||||
#define USBFS_UEP1_RX_EN 0x80 // enable USB endpoint 1 receiving (OUT)
|
||||
#define USBFS_UEP1_TX_EN 0x40 // enable USB endpoint 1 transmittal (IN)
|
||||
#define USBFS_UEP1_BUF_MOD 0x10 // buffer mode of USB endpoint 1
|
||||
// UEPn_RX_EN & UEPn_TX_EN & UEPn_BUF_MOD: USB endpoint 1/2/3 buffer mode, buffer start address is UEPn_DMA
|
||||
// 0 0 x: disable endpoint and disable buffer
|
||||
// 1 0 0: 64 bytes buffer for receiving (OUT endpoint)
|
||||
@@ -492,8 +492,8 @@ typedef struct __PACKED _UDISK_BOC_CSW {/* status of BulkOnly USB-FlashDisk */
|
||||
// 0 1 1: dual 64 bytes buffer by toggle bit bUEP_T_TOG selection for transmittal (IN endpoint), total=128bytes
|
||||
// 1 1 0: 64 bytes buffer for receiving (OUT endpoint) + 64 bytes buffer for transmittal (IN endpoint), total=128bytes
|
||||
// 1 1 1: dual 64 bytes buffer by bUEP_R_TOG selection for receiving (OUT endpoint) + dual 64 bytes buffer by bUEP_T_TOG selection for transmittal (IN endpoint), total=256bytes
|
||||
#define USBHD_UEP4_RX_EN 0x08 // enable USB endpoint 4 receiving (OUT)
|
||||
#define USBHD_UEP4_TX_EN 0x04 // enable USB endpoint 4 transmittal (IN)
|
||||
#define USBFS_UEP4_RX_EN 0x08 // enable USB endpoint 4 receiving (OUT)
|
||||
#define USBFS_UEP4_TX_EN 0x04 // enable USB endpoint 4 transmittal (IN)
|
||||
// UEP4_RX_EN & UEP4_TX_EN: USB endpoint 4 buffer mode, buffer start address is UEP0_DMA
|
||||
// 0 0: single 64 bytes buffer for endpoint 0 receiving & transmittal (OUT & IN endpoint)
|
||||
// 1 0: single 64 bytes buffer for endpoint 0 receiving & transmittal (OUT & IN endpoint) + 64 bytes buffer for endpoint 4 receiving (OUT endpoint), total=128bytes
|
||||
@@ -501,152 +501,152 @@ typedef struct __PACKED _UDISK_BOC_CSW {/* status of BulkOnly USB-FlashDisk */
|
||||
// 1 1: single 64 bytes buffer for endpoint 0 receiving & transmittal (OUT & IN endpoint)
|
||||
// + 64 bytes buffer for endpoint 4 receiving (OUT endpoint) + 64 bytes buffer for endpoint 4 transmittal (IN endpoint), total=192bytes
|
||||
|
||||
#define USBHD_UEP2_3_MOD (USBOTG_FS->UEP2_3_MOD) // endpoint 2/3 mode
|
||||
#define USBHD_UEP3_RX_EN 0x80 // enable USB endpoint 3 receiving (OUT)
|
||||
#define USBHD_UEP3_TX_EN 0x40 // enable USB endpoint 3 transmittal (IN)
|
||||
#define USBHD_UEP3_BUF_MOD 0x10 // buffer mode of USB endpoint 3
|
||||
#define USBHD_UEP2_RX_EN 0x08 // enable USB endpoint 2 receiving (OUT)
|
||||
#define USBHD_UEP2_TX_EN 0x04 // enable USB endpoint 2 transmittal (IN)
|
||||
#define USBHD_UEP2_BUF_MOD 0x01 // buffer mode of USB endpoint 2
|
||||
#define USBFS_UEP2_3_MOD (USBFSD_FS->UEP2_3_MOD) // endpoint 2/3 mode
|
||||
#define USBFS_UEP3_RX_EN 0x80 // enable USB endpoint 3 receiving (OUT)
|
||||
#define USBFS_UEP3_TX_EN 0x40 // enable USB endpoint 3 transmittal (IN)
|
||||
#define USBFS_UEP3_BUF_MOD 0x10 // buffer mode of USB endpoint 3
|
||||
#define USBFS_UEP2_RX_EN 0x08 // enable USB endpoint 2 receiving (OUT)
|
||||
#define USBFS_UEP2_TX_EN 0x04 // enable USB endpoint 2 transmittal (IN)
|
||||
#define USBFS_UEP2_BUF_MOD 0x01 // buffer mode of USB endpoint 2
|
||||
|
||||
#define USBHD_UEP5_6_MOD (USBOTG_FS->UEP5_6_MOD) // endpoint 5/6 mode
|
||||
#define USBHD_UEP6_RX_EN 0x80 // enable USB endpoint 6 receiving (OUT)
|
||||
#define USBHD_UEP6_TX_EN 0x40 // enable USB endpoint 6 transmittal (IN)
|
||||
#define USBHD_UEP6_BUF_MOD 0x10 // buffer mode of USB endpoint 6
|
||||
#define USBHD_UEP5_RX_EN 0x08 // enable USB endpoint 5 receiving (OUT)
|
||||
#define USBHD_UEP5_TX_EN 0x04 // enable USB endpoint 5 transmittal (IN)
|
||||
#define USBHD_UEP5_BUF_MOD 0x01 // buffer mode of USB endpoint 5
|
||||
#define USBFS_UEP5_6_MOD (USBFSD_FS->UEP5_6_MOD) // endpoint 5/6 mode
|
||||
#define USBFS_UEP6_RX_EN 0x80 // enable USB endpoint 6 receiving (OUT)
|
||||
#define USBFS_UEP6_TX_EN 0x40 // enable USB endpoint 6 transmittal (IN)
|
||||
#define USBFS_UEP6_BUF_MOD 0x10 // buffer mode of USB endpoint 6
|
||||
#define USBFS_UEP5_RX_EN 0x08 // enable USB endpoint 5 receiving (OUT)
|
||||
#define USBFS_UEP5_TX_EN 0x04 // enable USB endpoint 5 transmittal (IN)
|
||||
#define USBFS_UEP5_BUF_MOD 0x01 // buffer mode of USB endpoint 5
|
||||
|
||||
#define USBHD_UEP7_MOD (USBOTG_FS->UEP7_MOD) // endpoint 7 mode
|
||||
#define USBHD_UEP7_RX_EN 0x08 // enable USB endpoint 7 receiving (OUT)
|
||||
#define USBHD_UEP7_TX_EN 0x04 // enable USB endpoint 7 transmittal (IN)
|
||||
#define USBHD_UEP7_BUF_MOD 0x01 // buffer mode of USB endpoint 7
|
||||
#define USBFS_UEP7_MOD (USBFSD_FS->UEP7_MOD) // endpoint 7 mode
|
||||
#define USBFS_UEP7_RX_EN 0x08 // enable USB endpoint 7 receiving (OUT)
|
||||
#define USBFS_UEP7_TX_EN 0x04 // enable USB endpoint 7 transmittal (IN)
|
||||
#define USBFS_UEP7_BUF_MOD 0x01 // buffer mode of USB endpoint 7
|
||||
/* USB_DMA */
|
||||
#define USBHD_UEP0_DMA (USBOTG_FS->UEP0_DMA) // endpoint 0 DMA buffer address
|
||||
#define USBHD_UEP1_DMA (USBOTG_FS->UEP1_DMA) // endpoint 1 DMA buffer address
|
||||
#define USBHD_UEP2_DMA (USBOTG_FS->UEP2_DMA) // endpoint 2 DMA buffer address
|
||||
#define USBHD_UEP3_DMA (USBOTG_FS->UEP3_DMA) // endpoint 3 DMA buffer address
|
||||
#define USBHD_UEP4_DMA (USBOTG_FS->UEP4_DMA) // endpoint 4 DMA buffer address
|
||||
#define USBHD_UEP5_DMA (USBOTG_FS->UEP5_DMA) // endpoint 5 DMA buffer address
|
||||
#define USBHD_UEP6_DMA (USBOTG_FS->UEP6_DMA) // endpoint 6 DMA buffer address
|
||||
#define USBHD_UEP7_DMA (USBOTG_FS->UEP7_DMA) // endpoint 7 DMA buffer address
|
||||
#define USBFS_UEP0_DMA (USBFSD_FS->UEP0_DMA) // endpoint 0 DMA buffer address
|
||||
#define USBFS_UEP1_DMA (USBFSD_FS->UEP1_DMA) // endpoint 1 DMA buffer address
|
||||
#define USBFS_UEP2_DMA (USBFSD_FS->UEP2_DMA) // endpoint 2 DMA buffer address
|
||||
#define USBFS_UEP3_DMA (USBFSD_FS->UEP3_DMA) // endpoint 3 DMA buffer address
|
||||
#define USBFS_UEP4_DMA (USBFSD_FS->UEP4_DMA) // endpoint 4 DMA buffer address
|
||||
#define USBFS_UEP5_DMA (USBFSD_FS->UEP5_DMA) // endpoint 5 DMA buffer address
|
||||
#define USBFS_UEP6_DMA (USBFSD_FS->UEP6_DMA) // endpoint 6 DMA buffer address
|
||||
#define USBFS_UEP7_DMA (USBFSD_FS->UEP7_DMA) // endpoint 7 DMA buffer address
|
||||
/* USB_EP_CTRL */
|
||||
#define USBHD_UEP0_T_LEN (USBOTG_FS->UEP0_TX_LEN) // endpoint 0 transmittal length
|
||||
#define USBHD_UEP0_TX_CTRL (USBOTG_FS->UEP0_TX_CTRL) // endpoint 0 control
|
||||
#define USBHD_UEP0_RX_CTRL (USBOTG_FS->UEP0_RX_CTRL) // endpoint 0 control
|
||||
#define USBFS_UEP0_T_LEN (USBFSD_FS->UEP0_TX_LEN) // endpoint 0 transmittal length
|
||||
#define USBFS_UEP0_TX_CTRL (USBFSD_FS->UEP0_TX_CTRL) // endpoint 0 control
|
||||
#define USBFS_UEP0_RX_CTRL (USBFSD_FS->UEP0_RX_CTRL) // endpoint 0 control
|
||||
|
||||
#define USBHD_UEP1_T_LEN (USBOTG_FS->UEP1_TX_LEN) // endpoint 1 transmittal length
|
||||
#define USBHD_UEP1_TX_CTRL (USBOTG_FS->UEP1_TX_CTRL) // endpoint 1 control
|
||||
#define USBHD_UEP1_RX_CTRL (USBOTG_FS->UEP1_RX_CTRL) // endpoint 1 control
|
||||
#define USBFS_UEP1_T_LEN (USBFSD_FS->UEP1_TX_LEN) // endpoint 1 transmittal length
|
||||
#define USBFS_UEP1_TX_CTRL (USBFSD_FS->UEP1_TX_CTRL) // endpoint 1 control
|
||||
#define USBFS_UEP1_RX_CTRL (USBFSD_FS->UEP1_RX_CTRL) // endpoint 1 control
|
||||
|
||||
#define USBHD_UEP2_T_LEN (USBOTG_FS->UEP2_TX_LEN) // endpoint 2 transmittal length
|
||||
#define USBHD_UEP2_TX_CTRL (USBOTG_FS->UEP2_TX_CTRL) // endpoint 2 control
|
||||
#define USBHD_UEP2_RX_CTRL (USBOTG_FS->UEP2_RX_CTRL) // endpoint 2 control
|
||||
#define USBFS_UEP2_T_LEN (USBFSD_FS->UEP2_TX_LEN) // endpoint 2 transmittal length
|
||||
#define USBFS_UEP2_TX_CTRL (USBFSD_FS->UEP2_TX_CTRL) // endpoint 2 control
|
||||
#define USBFS_UEP2_RX_CTRL (USBFSD_FS->UEP2_RX_CTRL) // endpoint 2 control
|
||||
|
||||
#define USBHD_UEP3_T_LEN (USBOTG_FS->UEP3_TX_LEN) // endpoint 3 transmittal length
|
||||
#define USBHD_UEP3_TX_CTRL (USBOTG_FS->UEP3_TX_CTRL) // endpoint 3 control
|
||||
#define USBHD_UEP3_RX_CTRL (USBOTG_FS->UEP3_RX_CTRL) // endpoint 3 control
|
||||
#define USBFS_UEP3_T_LEN (USBFSD_FS->UEP3_TX_LEN) // endpoint 3 transmittal length
|
||||
#define USBFS_UEP3_TX_CTRL (USBFSD_FS->UEP3_TX_CTRL) // endpoint 3 control
|
||||
#define USBFS_UEP3_RX_CTRL (USBFSD_FS->UEP3_RX_CTRL) // endpoint 3 control
|
||||
|
||||
#define USBHD_UEP4_T_LEN (USBOTG_FS->UEP4_TX_LEN) // endpoint 4 transmittal length
|
||||
#define USBHD_UEP4_TX_CTRL (USBOTG_FS->UEP4_TX_CTRL) // endpoint 4 control
|
||||
#define USBHD_UEP4_RX_CTRL (USBOTG_FS->UEP4_RX_CTRL) // endpoint 4 control
|
||||
#define USBFS_UEP4_T_LEN (USBFSD_FS->UEP4_TX_LEN) // endpoint 4 transmittal length
|
||||
#define USBFS_UEP4_TX_CTRL (USBFSD_FS->UEP4_TX_CTRL) // endpoint 4 control
|
||||
#define USBFS_UEP4_RX_CTRL (USBFSD_FS->UEP4_RX_CTRL) // endpoint 4 control
|
||||
|
||||
#define USBHD_UEP5_T_LEN (USBOTG_FS->UEP5_TX_LEN) // endpoint 5 transmittal length
|
||||
#define USBHD_UEP5_TX_CTRL (USBOTG_FS->UEP5_TX_CTRL) // endpoint 5 control
|
||||
#define USBHD_UEP5_RX_CTRL (USBOTG_FS->UEP5_RX_CTRL) // endpoint 5 control
|
||||
#define USBFS_UEP5_T_LEN (USBFSD_FS->UEP5_TX_LEN) // endpoint 5 transmittal length
|
||||
#define USBFS_UEP5_TX_CTRL (USBFSD_FS->UEP5_TX_CTRL) // endpoint 5 control
|
||||
#define USBFS_UEP5_RX_CTRL (USBFSD_FS->UEP5_RX_CTRL) // endpoint 5 control
|
||||
|
||||
#define USBHD_UEP6_T_LEN (USBOTG_FS->UEP6_TX_LEN) // endpoint 6 transmittal length
|
||||
#define USBHD_UEP6_TX_CTRL (USBOTG_FS->UEP6_TX_CTRL) // endpoint 6 control
|
||||
#define USBHD_UEP6_RX_CTRL (USBOTG_FS->UEP6_RX_CTRL) // endpoint 6 control
|
||||
#define USBFS_UEP6_T_LEN (USBFSD_FS->UEP6_TX_LEN) // endpoint 6 transmittal length
|
||||
#define USBFS_UEP6_TX_CTRL (USBFSD_FS->UEP6_TX_CTRL) // endpoint 6 control
|
||||
#define USBFS_UEP6_RX_CTRL (USBFSD_FS->UEP6_RX_CTRL) // endpoint 6 control
|
||||
|
||||
#define USBHD_UEP7_T_LEN (USBOTG_FS->UEP7_TX_LEN) // endpoint 7 transmittal length
|
||||
#define USBHD_UEP7_TX_CTRL (USBOTG_FS->UEP7_TX_CTRL) // endpoint 7 control
|
||||
#define USBHD_UEP7_RX_CTRL (USBOTG_FS->UEP7_RX_CTRL) // endpoint 7 control
|
||||
#define USBFS_UEP7_T_LEN (USBFSD_FS->UEP7_TX_LEN) // endpoint 7 transmittal length
|
||||
#define USBFS_UEP7_TX_CTRL (USBFSD_FS->UEP7_TX_CTRL) // endpoint 7 control
|
||||
#define USBFS_UEP7_RX_CTRL (USBFSD_FS->UEP7_RX_CTRL) // endpoint 7 control
|
||||
|
||||
#define USBHD_UEP_AUTO_TOG 0x08 // enable automatic toggle after successful transfer completion on endpoint 1/2/3: 0=manual toggle, 1=automatic toggle
|
||||
#define USBHD_UEP_R_TOG 0x04 // expected data toggle flag of USB endpoint X receiving (OUT): 0=DATA0, 1=DATA1
|
||||
#define USBHD_UEP_T_TOG 0x04 // prepared data toggle flag of USB endpoint X transmittal (IN): 0=DATA0, 1=DATA1
|
||||
#define USBFS_UEP_AUTO_TOG 0x08 // enable automatic toggle after successful transfer completion on endpoint 1/2/3: 0=manual toggle, 1=automatic toggle
|
||||
#define USBFS_UEP_R_TOG 0x04 // expected data toggle flag of USB endpoint X receiving (OUT): 0=DATA0, 1=DATA1
|
||||
#define USBFS_UEP_T_TOG 0x04 // prepared data toggle flag of USB endpoint X transmittal (IN): 0=DATA0, 1=DATA1
|
||||
|
||||
#define USBHD_UEP_R_RES1 0x02 // handshake response type high bit for USB endpoint X receiving (OUT)
|
||||
#define USBHD_UEP_R_RES0 0x01 // handshake response type low bit for USB endpoint X receiving (OUT)
|
||||
#define USBHD_UEP_R_RES_MASK 0x03 // bit mask of handshake response type for USB endpoint X receiving (OUT)
|
||||
#define USBHD_UEP_R_RES_ACK 0x00
|
||||
#define USBHD_UEP_R_RES_TOUT 0x01
|
||||
#define USBHD_UEP_R_RES_NAK 0x02
|
||||
#define USBHD_UEP_R_RES_STALL 0x03
|
||||
#define USBFS_UEP_R_RES1 0x02 // handshake response type high bit for USB endpoint X receiving (OUT)
|
||||
#define USBFS_UEP_R_RES0 0x01 // handshake response type low bit for USB endpoint X receiving (OUT)
|
||||
#define USBFS_UEP_R_RES_MASK 0x03 // bit mask of handshake response type for USB endpoint X receiving (OUT)
|
||||
#define USBFS_UEP_R_RES_ACK 0x00
|
||||
#define USBFS_UEP_R_RES_TOUT 0x01
|
||||
#define USBFS_UEP_R_RES_NAK 0x02
|
||||
#define USBFS_UEP_R_RES_STALL 0x03
|
||||
// RB_UEP_R_RES1 & RB_UEP_R_RES0: handshake response type for USB endpoint X receiving (OUT)
|
||||
// 00: ACK (ready)
|
||||
// 01: no response, time out to host, for non-zero endpoint isochronous transactions
|
||||
// 10: NAK (busy)
|
||||
// 11: STALL (error)
|
||||
#define USBHD_UEP_T_RES1 0x02 // handshake response type high bit for USB endpoint X transmittal (IN)
|
||||
#define USBHD_UEP_T_RES0 0x01 // handshake response type low bit for USB endpoint X transmittal (IN)
|
||||
#define USBHD_UEP_T_RES_MASK 0x03 // bit mask of handshake response type for USB endpoint X transmittal (IN)
|
||||
#define USBHD_UEP_T_RES_ACK 0x00
|
||||
#define USBHD_UEP_T_RES_TOUT 0x01
|
||||
#define USBHD_UEP_T_RES_NAK 0x02
|
||||
#define USBHD_UEP_T_RES_STALL 0x03
|
||||
#define USBFS_UEP_T_RES1 0x02 // handshake response type high bit for USB endpoint X transmittal (IN)
|
||||
#define USBFS_UEP_T_RES0 0x01 // handshake response type low bit for USB endpoint X transmittal (IN)
|
||||
#define USBFS_UEP_T_RES_MASK 0x03 // bit mask of handshake response type for USB endpoint X transmittal (IN)
|
||||
#define USBFS_UEP_T_RES_ACK 0x00
|
||||
#define USBFS_UEP_T_RES_TOUT 0x01
|
||||
#define USBFS_UEP_T_RES_NAK 0x02
|
||||
#define USBFS_UEP_T_RES_STALL 0x03
|
||||
// bUEP_T_RES1 & bUEP_T_RES0: handshake response type for USB endpoint X transmittal (IN)
|
||||
// 00: DATA0 or DATA1 then expecting ACK (ready)
|
||||
// 01: DATA0 or DATA1 then expecting no response, time out from host, for non-zero endpoint isochronous transactions
|
||||
// 10: NAK (busy)
|
||||
// 11: TALL (error)
|
||||
|
||||
#ifdef USBHD_HOST
|
||||
/* USBOTG_FS HOST CONTROL&CFG */
|
||||
#ifdef USBFS_HOST
|
||||
/* USBFSD_FS HOST CONTROL&CFG */
|
||||
/* HOST USB_CTRL */
|
||||
#define USBHD_UHOST_CTRL (USBOTG_FS->UDEV_CTRL) // USB host physical prot control
|
||||
#define USBHD_UH_PD_DIS 0x80 // disable USB UDP/UDM pulldown resistance: 0=enable pulldown, 1=disable
|
||||
#define USBHD_UH_DP_PIN 0x20 // ReadOnly: indicate current UDP pin level
|
||||
#define USBHD_UH_DM_PIN 0x10 // ReadOnly: indicate current UDM pin level
|
||||
#define USBHD_UH_LOW_SPEED 0x04 // enable USB port low speed: 0=full speed, 1=low speed
|
||||
#define USBHD_UH_BUS_RESET 0x02 // control USB bus reset: 0=normal, 1=force bus reset
|
||||
#define USBHD_UH_PORT_EN 0x01 // enable USB port: 0=disable, 1=enable port, automatic disabled if USB device detached
|
||||
#define USBFS_UHOST_CTRL (USBFSD_FS->UDEV_CTRL) // USB host physical prot control
|
||||
#define USBFS_UH_PD_DIS 0x80 // disable USB UDP/UDM pulldown resistance: 0=enable pulldown, 1=disable
|
||||
#define USBFS_UH_DP_PIN 0x20 // ReadOnly: indicate current UDP pin level
|
||||
#define USBFS_UH_DM_PIN 0x10 // ReadOnly: indicate current UDM pin level
|
||||
#define USBFS_UH_LOW_SPEED 0x04 // enable USB port low speed: 0=full speed, 1=low speed
|
||||
#define USBFS_UH_BUS_RESET 0x02 // control USB bus reset: 0=normal, 1=force bus reset
|
||||
#define USBFS_UH_PORT_EN 0x01 // enable USB port: 0=disable, 1=enable port, automatic disabled if USB device detached
|
||||
/* USB_INT_ST */
|
||||
#define USBHD_UIS_H_RES_MASK 0x0F // RO, bit mask of current transfer handshake response for USB host mode: 0000=no response, time out from device, others=handshake response PID received
|
||||
#define USBFS_UIS_H_RES_MASK 0x0F // RO, bit mask of current transfer handshake response for USB host mode: 0000=no response, time out from device, others=handshake response PID received
|
||||
/* USB_BUF_MOD */
|
||||
#define USBHD_UH_EP_MOD USBHD_UEP2_3_MOD //host endpoint mode
|
||||
#define USBHD__UH_EP_TX_EN 0x40 // enable USB host OUT endpoint transmittal
|
||||
#define USBHD__UH_EP_TBUF_MOD 0x10 // buffer mode of USB host OUT endpoint
|
||||
#define USBFS_UH_EP_MOD USBFS_UEP2_3_MOD //host endpoint mode
|
||||
#define USBFS__UH_EP_TX_EN 0x40 // enable USB host OUT endpoint transmittal
|
||||
#define USBFS__UH_EP_TBUF_MOD 0x10 // buffer mode of USB host OUT endpoint
|
||||
// UH_EP_TX_EN & UH_EP_TBUF_MOD: USB host OUT endpoint buffer mode, buffer start address is UH_TX_DMA
|
||||
// 0 x: disable endpoint and disable buffer
|
||||
// 1 0: 64 bytes buffer for transmittal (OUT endpoint)
|
||||
// 1 1: dual 64 bytes buffer by toggle bit bUH_T_TOG selection for transmittal (OUT endpoint), total=128bytes
|
||||
#define USBHD_UH_EP_RX_EN 0x08 // enable USB host IN endpoint receiving
|
||||
#define USBHD_UH_EP_RBUF_MOD 0x01 // buffer mode of USB host IN endpoint
|
||||
#define USBFS_UH_EP_RX_EN 0x08 // enable USB host IN endpoint receiving
|
||||
#define USBFS_UH_EP_RBUF_MOD 0x01 // buffer mode of USB host IN endpoint
|
||||
// UH_EP_RX_EN & UH_EP_RBUF_MOD: USB host IN endpoint buffer mode, buffer start address is UH_RX_DMA
|
||||
// 0 x: disable endpoint and disable buffer
|
||||
// 1 0: 64 bytes buffer for receiving (IN endpoint)
|
||||
// 1 1: dual 64 bytes buffer by toggle bit bUH_R_TOG selection for receiving (IN endpoint), total=128bytes
|
||||
/* USB_DMA */
|
||||
#define USBHD_UH_RX_DMA USBHD_UEP2_DMA // host rx endpoint buffer high address
|
||||
#define USBHD_UH_TX_DMA USBHD_UEP3_DMA // host tx endpoint buffer high address
|
||||
#define USBFS_UH_RX_DMA USBFS_UEP2_DMA // host rx endpoint buffer high address
|
||||
#define USBFS_UH_TX_DMA USBFS_UEP3_DMA // host tx endpoint buffer high address
|
||||
/* USB_HOST_SETUP */
|
||||
#define USBHD_UH_SETUP (*((PUINT16V)(0x50000036))) // host aux setup
|
||||
#define USBHD_UH_PRE_PID_EN 0x0400 // USB host PRE PID enable for low speed device via hub
|
||||
#define USBHD_UH_SOF_EN 0x04 // USB host automatic SOF enable
|
||||
#define USBHD_UH_EP_PID USBHD_UEP2_T_LEN // host endpoint and PID
|
||||
#define USBHD_UH_TOKEN_MASK 0xF0 // bit mask of token PID for USB host transfer
|
||||
#define USBHD_UH_ENDP_MASK 0x0F // bit mask of endpoint number for USB host transfer
|
||||
#define USBFS_UH_SETUP (*((PUINT16V)(0x50000036))) // host aux setup
|
||||
#define USBFS_UH_PRE_PID_EN 0x0400 // USB host PRE PID enable for low speed device via hub
|
||||
#define USBFS_UH_SOF_EN 0x04 // USB host automatic SOF enable
|
||||
#define USBFS_UH_EP_PID USBFS_UEP2_T_LEN // host endpoint and PID
|
||||
#define USBFS_UH_TOKEN_MASK 0xF0 // bit mask of token PID for USB host transfer
|
||||
#define USBFS_UH_ENDP_MASK 0x0F // bit mask of endpoint number for USB host transfer
|
||||
|
||||
#define USBHD_UH_RX_CTRL USBHD_UEP2_RX_CTRL // host receiver endpoint control
|
||||
#define USBHD_UH_R_AUTO_TOG 0x08 // enable automatic toggle after successful transfer completion: 0=manual toggle, 1=automatic toggle
|
||||
#define USBHD_UH_R_TOG 0x04 // expected data toggle flag of host receiving (IN): 0=DATA0, 1=DATA1
|
||||
#define USBHD_UH_R_RES 0x01 // prepared handshake response type for host receiving (IN): 0=ACK (ready), 1=no response, time out to device, for isochronous transactions
|
||||
#define USBFS_UH_RX_CTRL USBFS_UEP2_RX_CTRL // host receiver endpoint control
|
||||
#define USBFS_UH_R_AUTO_TOG 0x08 // enable automatic toggle after successful transfer completion: 0=manual toggle, 1=automatic toggle
|
||||
#define USBFS_UH_R_TOG 0x04 // expected data toggle flag of host receiving (IN): 0=DATA0, 1=DATA1
|
||||
#define USBFS_UH_R_RES 0x01 // prepared handshake response type for host receiving (IN): 0=ACK (ready), 1=no response, time out to device, for isochronous transactions
|
||||
|
||||
#define USBHD_UH_RX_CTRL USBHD_UEP2_RX_CTRL // host receiver endpoint control
|
||||
#define USBHD_UH_R_AUTO_TOG 0x08 // enable automatic toggle after successful transfer completion: 0=manual toggle, 1=automatic toggle
|
||||
#define USBHD_UH_R_TOG 0x04 // expected data toggle flag of host receiving (IN): 0=DATA0, 1=DATA1
|
||||
#define USBHD_UH_R_RES 0x01 // prepared handshake response type for host receiving (IN): 0=ACK (ready), 1=no response, time out to device, for isochronous transactions
|
||||
#define USBHD_UH_TX_LEN USBHD_UEP3_T_LEN // host transmittal endpoint transmittal length
|
||||
#define USBFS_UH_RX_CTRL USBFS_UEP2_RX_CTRL // host receiver endpoint control
|
||||
#define USBFS_UH_R_AUTO_TOG 0x08 // enable automatic toggle after successful transfer completion: 0=manual toggle, 1=automatic toggle
|
||||
#define USBFS_UH_R_TOG 0x04 // expected data toggle flag of host receiving (IN): 0=DATA0, 1=DATA1
|
||||
#define USBFS_UH_R_RES 0x01 // prepared handshake response type for host receiving (IN): 0=ACK (ready), 1=no response, time out to device, for isochronous transactions
|
||||
#define USBFS_UH_TX_LEN USBFS_UEP3_T_LEN // host transmittal endpoint transmittal length
|
||||
|
||||
#define USBHD_UH_TX_CTRL USBHD_UEP3_TX_CTRL // host transmittal endpoint control
|
||||
#define USBHD_UH_T_AUTO_TOG 0x08 // enable automatic toggle after successful transfer completion: 0=manual toggle, 1=automatic toggle
|
||||
#define USBHD_UH_T_TOG 0x04 // prepared data toggle flag of host transmittal (SETUP/OUT): 0=DATA0, 1=DATA1
|
||||
#define USBHD_UH_T_RES 0x01 // expected handshake response type for host transmittal (SETUP/OUT): 0=ACK (ready), 1=no response, time out from device, for isochronous transactions
|
||||
#define USBFS_UH_TX_CTRL USBFS_UEP3_TX_CTRL // host transmittal endpoint control
|
||||
#define USBFS_UH_T_AUTO_TOG 0x08 // enable automatic toggle after successful transfer completion: 0=manual toggle, 1=automatic toggle
|
||||
#define USBFS_UH_T_TOG 0x04 // prepared data toggle flag of host transmittal (SETUP/OUT): 0=DATA0, 1=DATA1
|
||||
#define USBFS_UH_T_RES 0x01 // expected handshake response type for host transmittal (SETUP/OUT): 0=ACK (ready), 1=no response, time out from device, for isochronous transactions
|
||||
#endif
|
||||
#ifdef USB_OTG
|
||||
#define USB_OTG_CR (USBOTG_FS->OTG_CR) // usb otg control
|
||||
#define USB_OTG_CR (USBFSD_FS->OTG_CR) // usb otg control
|
||||
#define USB_OTG_CR_SESS 0x20 // usb otg control,会话电平使能
|
||||
#define USB_OTG_CR_VBUS 0x10 // usb otg control,VBUS电平使能
|
||||
#define USB_OTG_CR_OTG_EN 0x08 // usb otg control,OTG功能使能
|
||||
@@ -654,7 +654,7 @@ typedef struct __PACKED _UDISK_BOC_CSW {/* status of BulkOnly USB-FlashDisk */
|
||||
#define USB_OTG_CR_CHARGEVBUS 0x02 // usb otg control,VBUS充电
|
||||
#define USB_OTG_CR_DISCHARGEVBUS 0x01 // usb otg control,VBUS放电
|
||||
|
||||
#define USB_OTG_SR (USBOTG_FS->OTG_CR) // usb otg status
|
||||
#define USB_OTG_SR (USBFSD_FS->OTG_CR) // usb otg status
|
||||
#define USB_OTG_SR_VBUS_VLD 0x01 // usb otg status,A设备VBUS输入电平有效
|
||||
#define USB_OTG_SR_SESS_VLD 0x02 // usb otg status,会话有效电平有效标志
|
||||
#define USB_OTG_SR_SESS_END 0x04 // usb otg status,会话结束电平有效标志
|
||||
@@ -734,15 +734,15 @@ extern PUINT8 pEP5_RAM_Addr; /
|
||||
extern PUINT8 pEP6_RAM_Addr; //ep6_out(64)+ep6_in(64)
|
||||
extern PUINT8 pEP7_RAM_Addr; //ep7_out(64)+ep7_in(64)
|
||||
|
||||
extern volatile UINT16 USBHD_Endp1_Up_Flag; /* USB2.0高速设备端点1数据上传状态: 0:空闲; 1:正在上传; */
|
||||
extern volatile UINT8 USBHD_Endp1_Down_Flag; /* USB2.0高速设备端点1下传成功标志 */
|
||||
extern volatile UINT8 USBHD_Endp1_Down_Len; /* USB2.0高速设备端点1下传长度 */
|
||||
extern volatile BOOL USBHD_Endp1_T_Tog; /* USB2.0高速设备端点1发送tog位翻转 */
|
||||
extern volatile BOOL USBHD_Endp1_R_Tog;
|
||||
extern volatile UINT16 USBFS_Endp1_Up_Flag; /* USB2.0高速设备端点1数据上传状态: 0:空闲; 1:正在上传; */
|
||||
extern volatile UINT8 USBFS_Endp1_Down_Flag; /* USB2.0高速设备端点1下传成功标志 */
|
||||
extern volatile UINT8 USBFS_Endp1_Down_Len; /* USB2.0高速设备端点1下传长度 */
|
||||
extern volatile BOOL USBFS_Endp1_T_Tog; /* USB2.0高速设备端点1发送tog位翻转 */
|
||||
extern volatile BOOL USBFS_Endp1_R_Tog;
|
||||
|
||||
extern volatile UINT16 USBHD_Endp2_Up_Flag; /* USB2.0高速设备端点2数据上传状态: 0:空闲; 1:正在上传; */
|
||||
extern volatile UINT16 USBHD_Endp2_Up_LoadPtr; /* USB2.0高速设备端点2数据上传装载偏移 */
|
||||
extern volatile UINT8 USBHD_Endp2_Down_Flag; /* USB2.0高速设备端点2下传成功标志 */
|
||||
extern volatile UINT16 USBFS_Endp2_Up_Flag; /* USB2.0高速设备端点2数据上传状态: 0:空闲; 1:正在上传; */
|
||||
extern volatile UINT16 USBFS_Endp2_Up_LoadPtr; /* USB2.0高速设备端点2数据上传装载偏移 */
|
||||
extern volatile UINT8 USBFS_Endp2_Down_Flag; /* USB2.0高速设备端点2下传成功标志 */
|
||||
|
||||
/******************************************************************************/
|
||||
/* DMA地址和缓冲区相关宏定义 */
|
||||
@@ -791,7 +791,7 @@ extern void DevEP6_IN_Deal( UINT8 l );
|
||||
extern void DevEP7_IN_Deal( UINT8 l );
|
||||
|
||||
extern void USBDeviceInit( void );
|
||||
extern void USBOTG_Init( void );
|
||||
extern void USBFS_Init( void );
|
||||
|
||||
extern uint8_t USBSendData(void);
|
||||
|
||||
Reference in New Issue
Block a user