first submission
This commit is contained in:
qiyongshuang
@@ -0,0 +1,143 @@
|
||||
<?xml version="1.0" encoding="UTF-8" standalone="no"?>
|
||||
<?fileVersion 4.0.0?><cproject storage_type_id="org.eclipse.cdt.core.XmlProjectDescriptionStorage">
|
||||
<storageModule moduleId="org.eclipse.cdt.core.settings">
|
||||
<cconfiguration id="ilg.gnumcueclipse.managedbuild.cross.riscv.config.elf.release.1008047074">
|
||||
<storageModule buildSystemId="org.eclipse.cdt.managedbuilder.core.configurationDataProvider" id="ilg.gnumcueclipse.managedbuild.cross.riscv.config.elf.release.1008047074" moduleId="org.eclipse.cdt.core.settings" name="obj">
|
||||
<externalSettings/>
|
||||
<extensions>
|
||||
<extension id="org.eclipse.cdt.core.ELF" point="org.eclipse.cdt.core.BinaryParser"/>
|
||||
<extension id="org.eclipse.cdt.core.GASErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
|
||||
<extension id="org.eclipse.cdt.core.GmakeErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
|
||||
<extension id="org.eclipse.cdt.core.GLDErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
|
||||
<extension id="org.eclipse.cdt.core.CWDLocator" point="org.eclipse.cdt.core.ErrorParser"/>
|
||||
<extension id="org.eclipse.cdt.core.GCCErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
|
||||
</extensions>
|
||||
</storageModule>
|
||||
<storageModule moduleId="cdtBuildSystem" version="4.0.0">
|
||||
<configuration artifactName="${ProjName}" buildArtefactType="org.eclipse.cdt.build.core.buildArtefactType.exe" buildProperties="org.eclipse.cdt.build.core.buildArtefactType=org.eclipse.cdt.build.core.buildArtefactType.exe,org.eclipse.cdt.build.core.buildType=org.eclipse.cdt.build.core.buildType.release" cleanCommand="${cross_rm} -rf" description="" id="ilg.gnumcueclipse.managedbuild.cross.riscv.config.elf.release.1008047074" name="obj" parent="ilg.gnumcueclipse.managedbuild.cross.riscv.config.elf.release">
|
||||
<folderInfo id="ilg.gnumcueclipse.managedbuild.cross.riscv.config.elf.release.1008047074." name="/" resourcePath="">
|
||||
<toolChain id="ilg.gnumcueclipse.managedbuild.cross.riscv.toolchain.elf.release.231146001" name="RISC-V Cross GCC" superClass="ilg.gnumcueclipse.managedbuild.cross.riscv.toolchain.elf.release">
|
||||
<option id="ilg.gnumcueclipse.managedbuild.cross.riscv.option.addtools.createflash.1311852988" name="Create flash image" superClass="ilg.gnumcueclipse.managedbuild.cross.riscv.option.addtools.createflash" useByScannerDiscovery="false" value="true" valueType="boolean"/>
|
||||
<option id="ilg.gnumcueclipse.managedbuild.cross.riscv.option.addtools.createlisting.1983282875" name="Create extended listing" superClass="ilg.gnumcueclipse.managedbuild.cross.riscv.option.addtools.createlisting" useByScannerDiscovery="false" value="true" valueType="boolean"/>
|
||||
<option id="ilg.gnumcueclipse.managedbuild.cross.riscv.option.addtools.printsize.1000761142" name="Print size" superClass="ilg.gnumcueclipse.managedbuild.cross.riscv.option.addtools.printsize" useByScannerDiscovery="false" value="true" valueType="boolean"/>
|
||||
<option id="ilg.gnumcueclipse.managedbuild.cross.riscv.option.optimization.level.514997414" name="Optimization Level" superClass="ilg.gnumcueclipse.managedbuild.cross.riscv.option.optimization.level" useByScannerDiscovery="true" value="ilg.gnumcueclipse.managedbuild.cross.riscv.option.optimization.level.size" valueType="enumerated"/>
|
||||
<option id="ilg.gnumcueclipse.managedbuild.cross.riscv.option.optimization.messagelength.1008570639" name="Message length (-fmessage-length=0)" superClass="ilg.gnumcueclipse.managedbuild.cross.riscv.option.optimization.messagelength" useByScannerDiscovery="true" value="true" valueType="boolean"/>
|
||||
<option id="ilg.gnumcueclipse.managedbuild.cross.riscv.option.optimization.signedchar.467272439" name="'char' is signed (-fsigned-char)" superClass="ilg.gnumcueclipse.managedbuild.cross.riscv.option.optimization.signedchar" useByScannerDiscovery="true" value="true" valueType="boolean"/>
|
||||
<option id="ilg.gnumcueclipse.managedbuild.cross.riscv.option.optimization.functionsections.2047756949" name="Function sections (-ffunction-sections)" superClass="ilg.gnumcueclipse.managedbuild.cross.riscv.option.optimization.functionsections" useByScannerDiscovery="true" value="true" valueType="boolean"/>
|
||||
<option id="ilg.gnumcueclipse.managedbuild.cross.riscv.option.optimization.datasections.207613650" name="Data sections (-fdata-sections)" superClass="ilg.gnumcueclipse.managedbuild.cross.riscv.option.optimization.datasections" useByScannerDiscovery="true" value="true" valueType="boolean"/>
|
||||
<option id="ilg.gnumcueclipse.managedbuild.cross.riscv.option.debugging.level.1204865254" name="Debug level" superClass="ilg.gnumcueclipse.managedbuild.cross.riscv.option.debugging.level" useByScannerDiscovery="true"/>
|
||||
<option id="ilg.gnumcueclipse.managedbuild.cross.riscv.option.debugging.format.867779652" name="Debug format" superClass="ilg.gnumcueclipse.managedbuild.cross.riscv.option.debugging.format" useByScannerDiscovery="true"/>
|
||||
<option id="ilg.gnumcueclipse.managedbuild.cross.riscv.option.target.isa.base.1900297968" name="Architecture" superClass="ilg.gnumcueclipse.managedbuild.cross.riscv.option.target.isa.base" useByScannerDiscovery="false" value="ilg.gnumcueclipse.managedbuild.cross.riscv.option.target.arch.rv32i" valueType="enumerated"/>
|
||||
<option id="ilg.gnumcueclipse.managedbuild.cross.riscv.option.target.abi.integer.387605487" name="Integer ABI" superClass="ilg.gnumcueclipse.managedbuild.cross.riscv.option.target.abi.integer" useByScannerDiscovery="false" value="ilg.gnumcueclipse.managedbuild.cross.riscv.option.abi.integer.ilp32" valueType="enumerated"/>
|
||||
<option id="ilg.gnumcueclipse.managedbuild.cross.riscv.option.target.isa.multiply.1509705449" name="Multiply extension (RVM)" superClass="ilg.gnumcueclipse.managedbuild.cross.riscv.option.target.isa.multiply" useByScannerDiscovery="false" value="true" valueType="boolean"/>
|
||||
<option id="ilg.gnumcueclipse.managedbuild.cross.riscv.option.target.isa.compressed.1038505275" name="Compressed extension (RVC)" superClass="ilg.gnumcueclipse.managedbuild.cross.riscv.option.target.isa.compressed" useByScannerDiscovery="false" value="true" valueType="boolean"/>
|
||||
<option id="ilg.gnumcueclipse.managedbuild.cross.riscv.option.toolchain.name.1218760634" superClass="ilg.gnumcueclipse.managedbuild.cross.riscv.option.toolchain.name" useByScannerDiscovery="false" value="GNU MCU RISC-V GCC" valueType="string"/>
|
||||
<option id="ilg.gnumcueclipse.managedbuild.cross.riscv.option.command.prefix.103341323" name="Prefix" superClass="ilg.gnumcueclipse.managedbuild.cross.riscv.option.command.prefix" useByScannerDiscovery="false" value="riscv-none-embed-" valueType="string"/>
|
||||
<option id="ilg.gnumcueclipse.managedbuild.cross.riscv.option.command.c.487601824" name="C compiler" superClass="ilg.gnumcueclipse.managedbuild.cross.riscv.option.command.c" useByScannerDiscovery="false" value="gcc" valueType="string"/>
|
||||
<option id="ilg.gnumcueclipse.managedbuild.cross.riscv.option.command.cpp.1062130429" name="C++ compiler" superClass="ilg.gnumcueclipse.managedbuild.cross.riscv.option.command.cpp" useByScannerDiscovery="false" value="g++" valueType="string"/>
|
||||
<option id="ilg.gnumcueclipse.managedbuild.cross.riscv.option.command.ar.1194282993" name="Archiver" superClass="ilg.gnumcueclipse.managedbuild.cross.riscv.option.command.ar" useByScannerDiscovery="false" value="ar" valueType="string"/>
|
||||
<option id="ilg.gnumcueclipse.managedbuild.cross.riscv.option.command.objcopy.1529355265" name="Hex/Bin converter" superClass="ilg.gnumcueclipse.managedbuild.cross.riscv.option.command.objcopy" useByScannerDiscovery="false" value="objcopy" valueType="string"/>
|
||||
<option id="ilg.gnumcueclipse.managedbuild.cross.riscv.option.command.objdump.1053750745" name="Listing generator" superClass="ilg.gnumcueclipse.managedbuild.cross.riscv.option.command.objdump" useByScannerDiscovery="false" value="objdump" valueType="string"/>
|
||||
<option id="ilg.gnumcueclipse.managedbuild.cross.riscv.option.command.size.1441326233" name="Size command" superClass="ilg.gnumcueclipse.managedbuild.cross.riscv.option.command.size" useByScannerDiscovery="false" value="size" valueType="string"/>
|
||||
<option id="ilg.gnumcueclipse.managedbuild.cross.riscv.option.command.make.550105535" name="Build command" superClass="ilg.gnumcueclipse.managedbuild.cross.riscv.option.command.make" useByScannerDiscovery="false" value="make" valueType="string"/>
|
||||
<option id="ilg.gnumcueclipse.managedbuild.cross.riscv.option.command.rm.719280496" name="Remove command" superClass="ilg.gnumcueclipse.managedbuild.cross.riscv.option.command.rm" useByScannerDiscovery="false" value="rm" valueType="string"/>
|
||||
<option id="ilg.gnumcueclipse.managedbuild.cross.riscv.option.toolchain.id.226017994" superClass="ilg.gnumcueclipse.managedbuild.cross.riscv.option.toolchain.id" useByScannerDiscovery="false" value="512258282" valueType="string"/>
|
||||
<option id="ilg.gnumcueclipse.managedbuild.cross.riscv.option.target.isa.atomic.1590833110" name="Atomic extension (RVA)" superClass="ilg.gnumcueclipse.managedbuild.cross.riscv.option.target.isa.atomic" useByScannerDiscovery="false" value="true" valueType="boolean"/>
|
||||
<option id="ilg.gnumcueclipse.managedbuild.cross.riscv.option.warnings.unused.1961191588" name="Warn on various unused elements (-Wunused)" superClass="ilg.gnumcueclipse.managedbuild.cross.riscv.option.warnings.unused" useByScannerDiscovery="true" value="true" valueType="boolean"/>
|
||||
<option id="ilg.gnumcueclipse.managedbuild.cross.riscv.option.warnings.uninitialized.929829166" name="Warn on uninitialized variables (-Wuninitialised)" superClass="ilg.gnumcueclipse.managedbuild.cross.riscv.option.warnings.uninitialized" useByScannerDiscovery="true" value="true" valueType="boolean"/>
|
||||
<option id="ilg.gnumcueclipse.managedbuild.cross.riscv.option.optimization.nocommon.2003631682" superClass="ilg.gnumcueclipse.managedbuild.cross.riscv.option.optimization.nocommon" useByScannerDiscovery="true" value="true" valueType="boolean"/>
|
||||
<option id="ilg.gnumcueclipse.managedbuild.cross.riscv.option.target.isa.xw.1819910041" superClass="ilg.gnumcueclipse.managedbuild.cross.riscv.option.target.isa.xw" useByScannerDiscovery="false" value="true" valueType="boolean"/>
|
||||
<option id="ilg.gnumcueclipse.managedbuild.cross.riscv.option.target.saverestore.1179366128" superClass="ilg.gnumcueclipse.managedbuild.cross.riscv.option.target.saverestore" useByScannerDiscovery="false" value="true" valueType="boolean"/>
|
||||
<targetPlatform archList="all" binaryParser="org.eclipse.cdt.core.ELF" id="ilg.gnumcueclipse.managedbuild.cross.riscv.targetPlatform.1944008784" isAbstract="false" osList="all" superClass="ilg.gnumcueclipse.managedbuild.cross.riscv.targetPlatform"/>
|
||||
<builder buildPath="${workspace_loc:/GPIO_Toggle}/obj" id="ilg.gnumcueclipse.managedbuild.cross.riscv.builder.1421508906" keepEnvironmentInBuildfile="false" managedBuildOn="true" name="Gnu Make Builder" parallelBuildOn="true" parallelizationNumber="optimal" superClass="ilg.gnumcueclipse.managedbuild.cross.riscv.builder"/>
|
||||
<tool id="ilg.gnumcueclipse.managedbuild.cross.riscv.tool.assembler.1244756189" name="GNU RISC-V Cross Assembler" superClass="ilg.gnumcueclipse.managedbuild.cross.riscv.tool.assembler">
|
||||
<option id="ilg.gnumcueclipse.managedbuild.cross.riscv.option.assembler.usepreprocessor.1692176068" name="Use preprocessor" superClass="ilg.gnumcueclipse.managedbuild.cross.riscv.option.assembler.usepreprocessor" useByScannerDiscovery="false" value="true" valueType="boolean"/>
|
||||
<option IS_BUILTIN_EMPTY="false" IS_VALUE_EMPTY="false" id="ilg.gnumcueclipse.managedbuild.cross.riscv.option.assembler.include.paths.1034038285" name="Include paths (-I)" superClass="ilg.gnumcueclipse.managedbuild.cross.riscv.option.assembler.include.paths" useByScannerDiscovery="true" valueType="includePath">
|
||||
<listOptionValue builtIn="false" value=""${workspace_loc:/${ProjName}/Startup}""/>
|
||||
</option>
|
||||
<inputType id="ilg.gnumcueclipse.managedbuild.cross.riscv.tool.assembler.input.126366858" superClass="ilg.gnumcueclipse.managedbuild.cross.riscv.tool.assembler.input"/>
|
||||
</tool>
|
||||
<tool id="ilg.gnumcueclipse.managedbuild.cross.riscv.tool.c.compiler.1731377187" name="GNU RISC-V Cross C Compiler" superClass="ilg.gnumcueclipse.managedbuild.cross.riscv.tool.c.compiler">
|
||||
<option IS_BUILTIN_EMPTY="false" IS_VALUE_EMPTY="false" id="ilg.gnumcueclipse.managedbuild.cross.riscv.option.c.compiler.include.paths.1567947810" name="Include paths (-I)" superClass="ilg.gnumcueclipse.managedbuild.cross.riscv.option.c.compiler.include.paths" useByScannerDiscovery="true" valueType="includePath">
|
||||
<listOptionValue builtIn="false" value=""${workspace_loc:/${ProjName}/Debug}""/>
|
||||
<listOptionValue builtIn="false" value=""${workspace_loc:/${ProjName}/Core}""/>
|
||||
<listOptionValue builtIn="false" value=""${workspace_loc:/${ProjName}/User}""/>
|
||||
<listOptionValue builtIn="false" value=""${workspace_loc:/${ProjName}/Peripheral/inc}""/>
|
||||
</option>
|
||||
<option id="ilg.gnumcueclipse.managedbuild.cross.riscv.option.c.compiler.std.2020844713" name="Language standard" superClass="ilg.gnumcueclipse.managedbuild.cross.riscv.option.c.compiler.std" useByScannerDiscovery="true" value="ilg.gnumcueclipse.managedbuild.cross.riscv.option.c.compiler.std.gnu99" valueType="enumerated"/>
|
||||
<option IS_BUILTIN_EMPTY="false" IS_VALUE_EMPTY="true" id="ilg.gnumcueclipse.managedbuild.cross.riscv.option.c.compiler.defs.177116515" name="Defined symbols (-D)" superClass="ilg.gnumcueclipse.managedbuild.cross.riscv.option.c.compiler.defs" useByScannerDiscovery="true" valueType="definedSymbols"/>
|
||||
<inputType id="ilg.gnumcueclipse.managedbuild.cross.riscv.tool.c.compiler.input.2036806839" superClass="ilg.gnumcueclipse.managedbuild.cross.riscv.tool.c.compiler.input"/>
|
||||
</tool>
|
||||
<tool id="ilg.gnumcueclipse.managedbuild.cross.riscv.tool.cpp.compiler.1610882921" name="GNU RISC-V Cross C++ Compiler" superClass="ilg.gnumcueclipse.managedbuild.cross.riscv.tool.cpp.compiler"/>
|
||||
<tool id="ilg.gnumcueclipse.managedbuild.cross.riscv.tool.c.linker.1620074387" name="GNU RISC-V Cross C Linker" superClass="ilg.gnumcueclipse.managedbuild.cross.riscv.tool.c.linker">
|
||||
<option id="ilg.gnumcueclipse.managedbuild.cross.riscv.option.c.linker.gcsections.194760422" name="Remove unused sections (-Xlinker --gc-sections)" superClass="ilg.gnumcueclipse.managedbuild.cross.riscv.option.c.linker.gcsections" useByScannerDiscovery="false" value="true" valueType="boolean"/>
|
||||
<option IS_BUILTIN_EMPTY="false" IS_VALUE_EMPTY="true" id="ilg.gnumcueclipse.managedbuild.cross.riscv.option.c.linker.paths.2057340378" name="Library search path (-L)" superClass="ilg.gnumcueclipse.managedbuild.cross.riscv.option.c.linker.paths" useByScannerDiscovery="false" valueType="libPaths"/>
|
||||
<option IS_BUILTIN_EMPTY="false" IS_VALUE_EMPTY="false" id="ilg.gnumcueclipse.managedbuild.cross.riscv.option.c.linker.scriptfile.1390103472" name="Script files (-T)" superClass="ilg.gnumcueclipse.managedbuild.cross.riscv.option.c.linker.scriptfile" useByScannerDiscovery="false" valueType="stringList">
|
||||
<listOptionValue builtIn="false" value=""${workspace_loc:/${ProjName}/Ld/Link.ld}""/>
|
||||
</option>
|
||||
<option id="ilg.gnumcueclipse.managedbuild.cross.riscv.option.c.linker.nostart.913830613" name="Do not use standard start files (-nostartfiles)" superClass="ilg.gnumcueclipse.managedbuild.cross.riscv.option.c.linker.nostart" useByScannerDiscovery="false" value="true" valueType="boolean"/>
|
||||
<option id="ilg.gnumcueclipse.managedbuild.cross.riscv.option.c.linker.usenewlibnano.239404511" name="Use newlib-nano (--specs=nano.specs)" superClass="ilg.gnumcueclipse.managedbuild.cross.riscv.option.c.linker.usenewlibnano" useByScannerDiscovery="false" value="true" valueType="boolean"/>
|
||||
<option id="ilg.gnumcueclipse.managedbuild.cross.riscv.option.c.linker.usenewlibnosys.351964161" name="Do not use syscalls (--specs=nosys.specs)" superClass="ilg.gnumcueclipse.managedbuild.cross.riscv.option.c.linker.usenewlibnosys" useByScannerDiscovery="false" value="true" valueType="boolean"/>
|
||||
<option IS_BUILTIN_EMPTY="false" IS_VALUE_EMPTY="true" id="ilg.gnumcueclipse.managedbuild.cross.riscv.option.c.linker.otherobjs.16994550" name="Other objects" superClass="ilg.gnumcueclipse.managedbuild.cross.riscv.option.c.linker.otherobjs" useByScannerDiscovery="false" valueType="userObjs"/>
|
||||
<option IS_BUILTIN_EMPTY="false" IS_VALUE_EMPTY="true" id="ilg.gnumcueclipse.managedbuild.cross.riscv.option.c.linker.flags.1125808200" name="Linker flags (-Xlinker [option])" superClass="ilg.gnumcueclipse.managedbuild.cross.riscv.option.c.linker.flags" useByScannerDiscovery="false" valueType="stringList"/>
|
||||
<inputType id="ilg.gnumcueclipse.managedbuild.cross.riscv.tool.c.linker.input.1859223768" superClass="ilg.gnumcueclipse.managedbuild.cross.riscv.tool.c.linker.input">
|
||||
<additionalInput kind="additionalinputdependency" paths="$(USER_OBJS)"/>
|
||||
<additionalInput kind="additionalinput" paths="$(LIBS)"/>
|
||||
</inputType>
|
||||
</tool>
|
||||
<tool id="ilg.gnumcueclipse.managedbuild.cross.riscv.tool.cpp.linker.1947503520" name="GNU RISC-V Cross C++ Linker" superClass="ilg.gnumcueclipse.managedbuild.cross.riscv.tool.cpp.linker">
|
||||
<option id="ilg.gnumcueclipse.managedbuild.cross.riscv.option.cpp.linker.gcsections.1689063433" name="Remove unused sections (-Xlinker --gc-sections)" superClass="ilg.gnumcueclipse.managedbuild.cross.riscv.option.cpp.linker.gcsections" value="true" valueType="boolean"/>
|
||||
<option IS_BUILTIN_EMPTY="false" IS_VALUE_EMPTY="false" id="ilg.gnumcueclipse.managedbuild.cross.riscv.option.cpp.linker.paths.1029177148" name="Library search path (-L)" superClass="ilg.gnumcueclipse.managedbuild.cross.riscv.option.cpp.linker.paths" valueType="libPaths">
|
||||
<listOptionValue builtIn="false" value=""../LD""/>
|
||||
</option>
|
||||
<option IS_BUILTIN_EMPTY="false" IS_VALUE_EMPTY="false" id="ilg.gnumcueclipse.managedbuild.cross.riscv.option.cpp.linker.scriptfile.1751226764" name="Script files (-T)" superClass="ilg.gnumcueclipse.managedbuild.cross.riscv.option.cpp.linker.scriptfile" valueType="stringList">
|
||||
<listOptionValue builtIn="false" value="Link.ld"/>
|
||||
</option>
|
||||
<option id="ilg.gnumcueclipse.managedbuild.cross.riscv.option.cpp.linker.nostart.642896175" name="Do not use standard start files (-nostartfiles)" superClass="ilg.gnumcueclipse.managedbuild.cross.riscv.option.cpp.linker.nostart" value="true" valueType="boolean"/>
|
||||
<option id="ilg.gnumcueclipse.managedbuild.cross.riscv.option.cpp.linker.usenewlibnano.1540675679" name="Use newlib-nano (--specs=nano.specs)" superClass="ilg.gnumcueclipse.managedbuild.cross.riscv.option.cpp.linker.usenewlibnano" value="true" valueType="boolean"/>
|
||||
</tool>
|
||||
<tool id="ilg.gnumcueclipse.managedbuild.cross.riscv.tool.archiver.1292785366" name="GNU RISC-V Cross Archiver" superClass="ilg.gnumcueclipse.managedbuild.cross.riscv.tool.archiver"/>
|
||||
<tool id="ilg.gnumcueclipse.managedbuild.cross.riscv.tool.createflash.1801165667" name="GNU RISC-V Cross Create Flash Image" superClass="ilg.gnumcueclipse.managedbuild.cross.riscv.tool.createflash"/>
|
||||
<tool id="ilg.gnumcueclipse.managedbuild.cross.riscv.tool.createlisting.1356766765" name="GNU RISC-V Cross Create Listing" superClass="ilg.gnumcueclipse.managedbuild.cross.riscv.tool.createlisting">
|
||||
<option id="ilg.gnumcueclipse.managedbuild.cross.riscv.option.createlisting.source.2052761852" name="Display source (--source|-S)" superClass="ilg.gnumcueclipse.managedbuild.cross.riscv.option.createlisting.source" useByScannerDiscovery="false" value="false" valueType="boolean"/>
|
||||
<option id="ilg.gnumcueclipse.managedbuild.cross.riscv.option.createlisting.allheaders.439659821" name="Display all headers (--all-headers|-x)" superClass="ilg.gnumcueclipse.managedbuild.cross.riscv.option.createlisting.allheaders" useByScannerDiscovery="false" value="true" valueType="boolean"/>
|
||||
<option id="ilg.gnumcueclipse.managedbuild.cross.riscv.option.createlisting.demangle.67111865" name="Demangle names (--demangle|-C)" superClass="ilg.gnumcueclipse.managedbuild.cross.riscv.option.createlisting.demangle" useByScannerDiscovery="false" value="true" valueType="boolean"/>
|
||||
<option id="ilg.gnumcueclipse.managedbuild.cross.riscv.option.createlisting.linenumbers.1549373929" name="Display line numbers (--line-numbers|-l)" superClass="ilg.gnumcueclipse.managedbuild.cross.riscv.option.createlisting.linenumbers" useByScannerDiscovery="false" value="false" valueType="boolean"/>
|
||||
<option id="ilg.gnumcueclipse.managedbuild.cross.riscv.option.createlisting.wide.1298918921" name="Wide lines (--wide|-w)" superClass="ilg.gnumcueclipse.managedbuild.cross.riscv.option.createlisting.wide" useByScannerDiscovery="false" value="false" valueType="boolean"/>
|
||||
<option id="ilg.gnumcueclipse.managedbuild.cross.riscv.option.createlisting.disassemble.1859590835" name="Disassemble (--disassemble|-d)" superClass="ilg.gnumcueclipse.managedbuild.cross.riscv.option.createlisting.disassemble" useByScannerDiscovery="false" value="true" valueType="boolean"/>
|
||||
</tool>
|
||||
<tool id="ilg.gnumcueclipse.managedbuild.cross.riscv.tool.printsize.712424314" name="GNU RISC-V Cross Print Size" superClass="ilg.gnumcueclipse.managedbuild.cross.riscv.tool.printsize">
|
||||
<option id="ilg.gnumcueclipse.managedbuild.cross.riscv.option.printsize.format.1404031980" name="Size format" superClass="ilg.gnumcueclipse.managedbuild.cross.riscv.option.printsize.format" useByScannerDiscovery="false"/>
|
||||
</tool>
|
||||
</toolChain>
|
||||
</folderInfo>
|
||||
<sourceEntries>
|
||||
<entry excluding="Startup|Peripheral|Ld|Debug|Core" flags="VALUE_WORKSPACE_PATH|RESOLVED" kind="sourcePath" name=""/>
|
||||
<entry flags="VALUE_WORKSPACE_PATH|RESOLVED" kind="sourcePath" name="Core"/>
|
||||
<entry flags="VALUE_WORKSPACE_PATH|RESOLVED" kind="sourcePath" name="Debug"/>
|
||||
<entry flags="VALUE_WORKSPACE_PATH|RESOLVED" kind="sourcePath" name="Ld"/>
|
||||
<entry flags="VALUE_WORKSPACE_PATH|RESOLVED" kind="sourcePath" name="Peripheral"/>
|
||||
<entry excluding="startup_ch32v20x_D8.S|startup_ch32v20x_D8W.S" flags="VALUE_WORKSPACE_PATH|RESOLVED" kind="sourcePath" name="Startup"/>
|
||||
</sourceEntries>
|
||||
</configuration>
|
||||
</storageModule>
|
||||
<storageModule moduleId="org.eclipse.cdt.core.externalSettings"/>
|
||||
<storageModule moduleId="ilg.gnumcueclipse.managedbuild.packs"/>
|
||||
</cconfiguration>
|
||||
</storageModule>
|
||||
<storageModule moduleId="cdtBuildSystem" version="4.0.0">
|
||||
<project id="999.ilg.gnumcueclipse.managedbuild.cross.riscv.target.elf.275846018" name="Executable file" projectType="ilg.gnumcueclipse.managedbuild.cross.riscv.target.elf"/>
|
||||
</storageModule>
|
||||
<storageModule moduleId="scannerConfiguration">
|
||||
<autodiscovery enabled="true" problemReportingEnabled="true" selectedProfileId=""/>
|
||||
<scannerConfigBuildInfo instanceId="ilg.gnumcueclipse.managedbuild.cross.riscv.config.elf.debug.767917625;ilg.gnumcueclipse.managedbuild.cross.riscv.config.elf.debug.767917625.;ilg.gnumcueclipse.managedbuild.cross.riscv.tool.c.compiler.1375371130;ilg.gnumcueclipse.managedbuild.cross.riscv.tool.c.compiler.input.1473381709">
|
||||
<autodiscovery enabled="true" problemReportingEnabled="true" selectedProfileId=""/>
|
||||
</scannerConfigBuildInfo>
|
||||
<scannerConfigBuildInfo instanceId="ilg.gnumcueclipse.managedbuild.cross.riscv.config.elf.release.1008047074;ilg.gnumcueclipse.managedbuild.cross.riscv.config.elf.release.1008047074.;ilg.gnumcueclipse.managedbuild.cross.riscv.tool.c.compiler.1731377187;ilg.gnumcueclipse.managedbuild.cross.riscv.tool.c.compiler.input.2036806839">
|
||||
<autodiscovery enabled="true" problemReportingEnabled="true" selectedProfileId=""/>
|
||||
</scannerConfigBuildInfo>
|
||||
</storageModule>
|
||||
<storageModule moduleId="org.eclipse.cdt.core.LanguageSettingsProviders"/>
|
||||
<storageModule moduleId="org.eclipse.cdt.make.core.buildtargets"/>
|
||||
|
||||
</cproject>
|
||||
@@ -0,0 +1,61 @@
|
||||
<?xml version="1.0" encoding="UTF-8" standalone="no"?>
|
||||
<projectDescription>
|
||||
<name>GPIO_Toggle</name>
|
||||
<comment/>
|
||||
<projects/>
|
||||
<buildSpec>
|
||||
<buildCommand>
|
||||
<name>org.eclipse.cdt.managedbuilder.core.genmakebuilder</name>
|
||||
<triggers>clean,full,incremental,</triggers>
|
||||
<arguments/>
|
||||
</buildCommand>
|
||||
<buildCommand>
|
||||
<name>org.eclipse.cdt.managedbuilder.core.ScannerConfigBuilder</name>
|
||||
<triggers>full,incremental,</triggers>
|
||||
<arguments/>
|
||||
</buildCommand>
|
||||
</buildSpec>
|
||||
<natures>
|
||||
<nature>org.eclipse.cdt.core.cnature</nature>
|
||||
<nature>org.eclipse.cdt.managedbuilder.core.managedBuildNature</nature>
|
||||
<nature>org.eclipse.cdt.managedbuilder.core.ScannerConfigNature</nature>
|
||||
</natures>
|
||||
<filteredResources>
|
||||
<filter>
|
||||
<id>1595986042669</id>
|
||||
<name/>
|
||||
<type>22</type>
|
||||
<matcher>
|
||||
<id>org.eclipse.ui.ide.multiFilter</id>
|
||||
<arguments>1.0-name-matches-false-false-*.wvproj</arguments>
|
||||
</matcher>
|
||||
</filter>
|
||||
</filteredResources>
|
||||
<linkedResources>
|
||||
<link>
|
||||
<name>Core</name>
|
||||
<type>2</type>
|
||||
<location>PARENT-2-PROJECT_LOC/SRC/Core</location>
|
||||
</link>
|
||||
<link>
|
||||
<name>Debug</name>
|
||||
<type>2</type>
|
||||
<location>PARENT-2-PROJECT_LOC/SRC/Debug</location>
|
||||
</link>
|
||||
<link>
|
||||
<name>Ld</name>
|
||||
<type>2</type>
|
||||
<location>PARENT-2-PROJECT_LOC/SRC/Ld</location>
|
||||
</link>
|
||||
<link>
|
||||
<name>Peripheral</name>
|
||||
<type>2</type>
|
||||
<location>PARENT-2-PROJECT_LOC/SRC/Peripheral</location>
|
||||
</link>
|
||||
<link>
|
||||
<name>Startup</name>
|
||||
<type>2</type>
|
||||
<location>PARENT-2-PROJECT_LOC/SRC/Startup</location>
|
||||
</link>
|
||||
</linkedResources>
|
||||
</projectDescription>
|
||||
@@ -0,0 +1,14 @@
|
||||
<?xml version="1.0" encoding="UTF-8" standalone="no"?>
|
||||
<project>
|
||||
<configuration id="ilg.gnumcueclipse.managedbuild.cross.riscv.config.elf.release.1008047074" name="obj">
|
||||
<extension point="org.eclipse.cdt.core.LanguageSettingsProvider">
|
||||
<provider copy-of="extension" id="org.eclipse.cdt.ui.UserLanguageSettingsProvider"/>
|
||||
<provider-reference id="org.eclipse.cdt.core.ReferencedProjectsLanguageSettingsProvider" ref="shared-provider"/>
|
||||
<provider-reference id="org.eclipse.cdt.managedbuilder.core.MBSLanguageSettingsProvider" ref="shared-provider"/>
|
||||
<provider class="org.eclipse.cdt.managedbuilder.language.settings.providers.GCCBuiltinSpecsDetector" console="false" env-hash="799444567038548322" id="ilg.gnumcueclipse.managedbuild.cross.riscv.GCCBuiltinSpecsDetector" keep-relative-paths="false" name="CDT RISC-V Cross GCC Built-in Compiler Settings" parameter="${COMMAND} ${FLAGS} ${cross_toolchain_flags} -E -P -v -dD "${INPUTS}"" prefer-non-shared="true">
|
||||
<language-scope id="org.eclipse.cdt.core.gcc"/>
|
||||
<language-scope id="org.eclipse.cdt.core.g++"/>
|
||||
</provider>
|
||||
</extension>
|
||||
</configuration>
|
||||
</project>
|
||||
@@ -0,0 +1,16 @@
|
||||
Mcu Type=CH32V20x
|
||||
Address=0x08000000
|
||||
Target Path=obj/GPIO_Toggle.hex
|
||||
Erase All=true
|
||||
Program=true
|
||||
Verify=true
|
||||
Reset=true
|
||||
|
||||
Vendor=WCH
|
||||
Link=WCH-Link
|
||||
Toolchain=RISC-V
|
||||
Series=CH32V203
|
||||
Description=ROM(byte): 64K, SRAM(byte): 20K, CHIP PINS: 32, GPIO PORTS: 27.\nWCH CH32V2 series of mainstream MCUs covers the needs of a large variety of applications in the industrial,medical and consumer markets. High performance with first-class peripherals and low-power,low-voltage operation is paired with a high level of integration at accessible prices with a simple architecture and easy-to-use tools.
|
||||
|
||||
PeripheralVersion=1.0
|
||||
MCU=CH32V203RBT6
|
||||
@@ -0,0 +1,2 @@
|
||||
�i“CZ ?"Ç�¸rŸ�F<Fy8E9Y‡½„%P a³D¶La† %Ã'y€¡]Ç;’¶ ŸS)1†1+R4><‚.„ÇÅ¿º° ?/£XO©Ä¿ChQN$*¢”»EÅBk‹!2tŒ+buh†nUb]xl‹l|
|
||||
+"Ÿ<“¯AH42}z8p;m€u 1Ž-¦eh»Od¼Âwµª7x{5�CqEx©=;¦¢e¢º»2£Š ‚«* BP Mš"
|
||||
@@ -0,0 +1,42 @@
|
||||
/********************************** (C) COPYRIGHT *******************************
|
||||
* File Name : ch32v20x_conf.h
|
||||
* Author : WCH
|
||||
* Version : V1.0.0
|
||||
* Date : 2021/06/06
|
||||
* Description : Library configuration file.
|
||||
*********************************************************************************
|
||||
* Copyright (c) 2021 Nanjing Qinheng Microelectronics Co., Ltd.
|
||||
* Attention: This software (modified or not) and binary are used for
|
||||
* microcontroller manufactured by Nanjing Qinheng Microelectronics.
|
||||
*******************************************************************************/
|
||||
#ifndef __CH32V20x_CONF_H
|
||||
#define __CH32V20x_CONF_H
|
||||
|
||||
#include "ch32v20x_adc.h"
|
||||
#include "ch32v20x_bkp.h"
|
||||
#include "ch32v20x_can.h"
|
||||
#include "ch32v20x_crc.h"
|
||||
#include "ch32v20x_dbgmcu.h"
|
||||
#include "ch32v20x_dma.h"
|
||||
#include "ch32v20x_exti.h"
|
||||
#include "ch32v20x_flash.h"
|
||||
#include "ch32v20x_gpio.h"
|
||||
#include "ch32v20x_i2c.h"
|
||||
#include "ch32v20x_iwdg.h"
|
||||
#include "ch32v20x_pwr.h"
|
||||
#include "ch32v20x_rcc.h"
|
||||
#include "ch32v20x_rtc.h"
|
||||
#include "ch32v20x_spi.h"
|
||||
#include "ch32v20x_tim.h"
|
||||
#include "ch32v20x_usart.h"
|
||||
#include "ch32v20x_wwdg.h"
|
||||
#include "ch32v20x_it.h"
|
||||
#include "ch32v20x_misc.h"
|
||||
|
||||
|
||||
#endif /* __CH32V20x_CONF_H */
|
||||
|
||||
|
||||
|
||||
|
||||
|
||||
@@ -0,0 +1,42 @@
|
||||
/********************************** (C) COPYRIGHT *******************************
|
||||
* File Name : ch32v20x_it.c
|
||||
* Author : WCH
|
||||
* Version : V1.0.0
|
||||
* Date : 2021/06/06
|
||||
* Description : Main Interrupt Service Routines.
|
||||
*********************************************************************************
|
||||
* Copyright (c) 2021 Nanjing Qinheng Microelectronics Co., Ltd.
|
||||
* Attention: This software (modified or not) and binary are used for
|
||||
* microcontroller manufactured by Nanjing Qinheng Microelectronics.
|
||||
*******************************************************************************/
|
||||
#include "ch32v20x_it.h"
|
||||
|
||||
void NMI_Handler(void) __attribute__((interrupt("WCH-Interrupt-fast")));
|
||||
void HardFault_Handler(void) __attribute__((interrupt("WCH-Interrupt-fast")));
|
||||
|
||||
/*********************************************************************
|
||||
* @fn NMI_Handler
|
||||
*
|
||||
* @brief This function handles NMI exception.
|
||||
*
|
||||
* @return none
|
||||
*/
|
||||
void NMI_Handler(void)
|
||||
{
|
||||
}
|
||||
|
||||
/*********************************************************************
|
||||
* @fn HardFault_Handler
|
||||
*
|
||||
* @brief This function handles Hard Fault exception.
|
||||
*
|
||||
* @return none
|
||||
*/
|
||||
void HardFault_Handler(void)
|
||||
{
|
||||
while (1)
|
||||
{
|
||||
}
|
||||
}
|
||||
|
||||
|
||||
@@ -0,0 +1,20 @@
|
||||
/********************************** (C) COPYRIGHT *******************************
|
||||
* File Name : ch32v20x_it.h
|
||||
* Author : WCH
|
||||
* Version : V1.0.0
|
||||
* Date : 2021/06/06
|
||||
* Description : This file contains the headers of the interrupt handlers.
|
||||
*********************************************************************************
|
||||
* Copyright (c) 2021 Nanjing Qinheng Microelectronics Co., Ltd.
|
||||
* Attention: This software (modified or not) and binary are used for
|
||||
* microcontroller manufactured by Nanjing Qinheng Microelectronics.
|
||||
*******************************************************************************/
|
||||
#ifndef __CH32V20x_IT_H
|
||||
#define __CH32V20x_IT_H
|
||||
|
||||
#include "debug.h"
|
||||
|
||||
|
||||
#endif /* __CH32V20x_IT_H */
|
||||
|
||||
|
||||
@@ -0,0 +1,68 @@
|
||||
/********************************** (C) COPYRIGHT *******************************
|
||||
* File Name : main.c
|
||||
* Author : WCH
|
||||
* Version : V1.0.0
|
||||
* Date : 2021/06/06
|
||||
* Description : Main program body.
|
||||
*********************************************************************************
|
||||
* Copyright (c) 2021 Nanjing Qinheng Microelectronics Co., Ltd.
|
||||
* Attention: This software (modified or not) and binary are used for
|
||||
* microcontroller manufactured by Nanjing Qinheng Microelectronics.
|
||||
*******************************************************************************/
|
||||
|
||||
/*
|
||||
*@Note
|
||||
GPIO routine:
|
||||
PA0 push-pull output.
|
||||
|
||||
*/
|
||||
|
||||
#include "debug.h"
|
||||
|
||||
/* Global define */
|
||||
|
||||
/* Global Variable */
|
||||
|
||||
/*********************************************************************
|
||||
* @fn GPIO_Toggle_INIT
|
||||
*
|
||||
* @brief Initializes GPIOA.0
|
||||
*
|
||||
* @return none
|
||||
*/
|
||||
void GPIO_Toggle_INIT(void)
|
||||
{
|
||||
GPIO_InitTypeDef GPIO_InitStructure = {0};
|
||||
|
||||
RCC_APB2PeriphClockCmd(RCC_APB2Periph_GPIOA, ENABLE);
|
||||
GPIO_InitStructure.GPIO_Pin = GPIO_Pin_0;
|
||||
GPIO_InitStructure.GPIO_Mode = GPIO_Mode_Out_PP;
|
||||
GPIO_InitStructure.GPIO_Speed = GPIO_Speed_50MHz;
|
||||
GPIO_Init(GPIOA, &GPIO_InitStructure);
|
||||
}
|
||||
|
||||
/*********************************************************************
|
||||
* @fn main
|
||||
*
|
||||
* @brief Main program.
|
||||
*
|
||||
* @return none
|
||||
*/
|
||||
int main(void)
|
||||
{
|
||||
u8 i = 0;
|
||||
|
||||
NVIC_PriorityGroupConfig(NVIC_PriorityGroup_2);
|
||||
Delay_Init();
|
||||
USART_Printf_Init(115200);
|
||||
printf("SystemClk:%d\r\n", SystemCoreClock);
|
||||
|
||||
printf("GPIO Toggle TEST\r\n");
|
||||
GPIO_Toggle_INIT();
|
||||
|
||||
while(1)
|
||||
{
|
||||
Delay_Ms(250);
|
||||
GPIO_WriteBit(GPIOA, GPIO_Pin_0, (i == 0) ? (i = Bit_SET) : (i = Bit_RESET));
|
||||
}
|
||||
}
|
||||
@@ -0,0 +1,986 @@
|
||||
/********************************** (C) COPYRIGHT *******************************
|
||||
* File Name : system_ch32v20x.c
|
||||
* Author : WCH
|
||||
* Version : V1.0.0
|
||||
* Date : 2021/06/06
|
||||
* Description : CH32V20x Device Peripheral Access Layer System Source File.
|
||||
* For HSE = 32Mhz (CH32V208x/CH32V203RBT6)
|
||||
* For HSE = 8Mhz (other CH32V203x)
|
||||
*********************************************************************************
|
||||
* Copyright (c) 2021 Nanjing Qinheng Microelectronics Co., Ltd.
|
||||
* Attention: This software (modified or not) and binary are used for
|
||||
* microcontroller manufactured by Nanjing Qinheng Microelectronics.
|
||||
*******************************************************************************/
|
||||
#include "ch32v20x.h"
|
||||
|
||||
/*
|
||||
* Uncomment the line corresponding to the desired System clock (SYSCLK) frequency (after
|
||||
* reset the HSI is used as SYSCLK source).
|
||||
* If none of the define below is enabled, the HSI is used as System clock source.
|
||||
*/
|
||||
//#define SYSCLK_FREQ_HSE HSE_VALUE
|
||||
//#define SYSCLK_FREQ_48MHz_HSE 48000000
|
||||
//#define SYSCLK_FREQ_56MHz_HSE 56000000
|
||||
//#define SYSCLK_FREQ_72MHz_HSE 72000000
|
||||
#define SYSCLK_FREQ_96MHz_HSE 96000000
|
||||
//#define SYSCLK_FREQ_120MHz_HSE 120000000
|
||||
//#define SYSCLK_FREQ_144MHz_HSE 144000000
|
||||
//#define SYSCLK_FREQ_HSI HSI_VALUE
|
||||
//#define SYSCLK_FREQ_48MHz_HSI 48000000
|
||||
//#define SYSCLK_FREQ_56MHz_HSI 56000000
|
||||
//#define SYSCLK_FREQ_72MHz_HSI 72000000
|
||||
//#define SYSCLK_FREQ_96MHz_HSI 96000000
|
||||
//#define SYSCLK_FREQ_120MHz_HSI 120000000
|
||||
//#define SYSCLK_FREQ_144MHz_HSI 144000000
|
||||
|
||||
/* Clock Definitions */
|
||||
#ifdef SYSCLK_FREQ_HSE
|
||||
uint32_t SystemCoreClock = SYSCLK_FREQ_HSE; /* System Clock Frequency (Core Clock) */
|
||||
#elif defined SYSCLK_FREQ_48MHz_HSE
|
||||
uint32_t SystemCoreClock = SYSCLK_FREQ_48MHz_HSE; /* System Clock Frequency (Core Clock) */
|
||||
#elif defined SYSCLK_FREQ_56MHz_HSE
|
||||
uint32_t SystemCoreClock = SYSCLK_FREQ_56MHz_HSE; /* System Clock Frequency (Core Clock) */
|
||||
#elif defined SYSCLK_FREQ_72MHz_HSE
|
||||
uint32_t SystemCoreClock = SYSCLK_FREQ_72MHz_HSE; /* System Clock Frequency (Core Clock) */
|
||||
#elif defined SYSCLK_FREQ_96MHz_HSE
|
||||
uint32_t SystemCoreClock = SYSCLK_FREQ_96MHz_HSE; /* System Clock Frequency (Core Clock) */
|
||||
#elif defined SYSCLK_FREQ_120MHz_HSE
|
||||
uint32_t SystemCoreClock = SYSCLK_FREQ_120MHz_HSE; /* System Clock Frequency (Core Clock) */
|
||||
#elif defined SYSCLK_FREQ_144MHz_HSE
|
||||
uint32_t SystemCoreClock = SYSCLK_FREQ_144MHz_HSE; /* System Clock Frequency (Core Clock) */
|
||||
#elif defined SYSCLK_FREQ_48MHz_HSI
|
||||
uint32_t SystemCoreClock = SYSCLK_FREQ_48MHz_HSI; /* System Clock Frequency (Core Clock) */
|
||||
#elif defined SYSCLK_FREQ_56MHz_HSI
|
||||
uint32_t SystemCoreClock = SYSCLK_FREQ_56MHz_HSI; /* System Clock Frequency (Core Clock) */
|
||||
#elif defined SYSCLK_FREQ_72MHz_HSI
|
||||
uint32_t SystemCoreClock = SYSCLK_FREQ_72MHz_HSI; /* System Clock Frequency (Core Clock) */
|
||||
#elif defined SYSCLK_FREQ_96MHz_HSI
|
||||
uint32_t SystemCoreClock = SYSCLK_FREQ_96MHz_HSI; /* System Clock Frequency (Core Clock) */
|
||||
#elif defined SYSCLK_FREQ_120MHz_HSI
|
||||
uint32_t SystemCoreClock = SYSCLK_FREQ_120MHz_HSI; /* System Clock Frequency (Core Clock) */
|
||||
#elif defined SYSCLK_FREQ_144MHz_HSI
|
||||
uint32_t SystemCoreClock = SYSCLK_FREQ_144MHz_HSI; /* System Clock Frequency (Core Clock) */
|
||||
#else
|
||||
uint32_t SystemCoreClock = HSI_VALUE; /* System Clock Frequency (Core Clock) */
|
||||
|
||||
#endif
|
||||
|
||||
__I uint8_t AHBPrescTable[16] = {0, 0, 0, 0, 0, 0, 0, 0, 1, 2, 3, 4, 6, 7, 8, 9};
|
||||
|
||||
|
||||
/* system_private_function_proto_types */
|
||||
static void SetSysClock(void);
|
||||
|
||||
#ifdef SYSCLK_FREQ_HSE
|
||||
static void SetSysClockToHSE( void );
|
||||
#elif defined SYSCLK_FREQ_48MHz_HSE
|
||||
static void SetSysClockTo48_HSE( void );
|
||||
#elif defined SYSCLK_FREQ_56MHz_HSE
|
||||
static void SetSysClockTo56_HSE( void );
|
||||
#elif defined SYSCLK_FREQ_72MHz_HSE
|
||||
static void SetSysClockTo72_HSE( void );
|
||||
#elif defined SYSCLK_FREQ_96MHz_HSE
|
||||
static void SetSysClockTo96_HSE( void );
|
||||
#elif defined SYSCLK_FREQ_120MHz_HSE
|
||||
static void SetSysClockTo120_HSE( void );
|
||||
#elif defined SYSCLK_FREQ_144MHz_HSE
|
||||
static void SetSysClockTo144_HSE( void );
|
||||
#elif defined SYSCLK_FREQ_48MHz_HSI
|
||||
static void SetSysClockTo48_HSI( void );
|
||||
#elif defined SYSCLK_FREQ_56MHz_HSI
|
||||
static void SetSysClockTo56_HSI( void );
|
||||
#elif defined SYSCLK_FREQ_72MHz_HSI
|
||||
static void SetSysClockTo72_HSI( void );
|
||||
#elif defined SYSCLK_FREQ_96MHz_HSI
|
||||
static void SetSysClockTo96_HSI( void );
|
||||
#elif defined SYSCLK_FREQ_120MHz_HSI
|
||||
static void SetSysClockTo120_HSI( void );
|
||||
#elif defined SYSCLK_FREQ_144MHz_HSI
|
||||
static void SetSysClockTo144_HSI( void );
|
||||
|
||||
#endif
|
||||
|
||||
/*********************************************************************
|
||||
* @fn SystemInit
|
||||
*
|
||||
* @brief Setup the microcontroller system Initialize the Embedded Flash Interface,
|
||||
* the PLL and update the SystemCoreClock variable.
|
||||
*
|
||||
* @return none
|
||||
*/
|
||||
void SystemInit (void)
|
||||
{
|
||||
RCC->CTLR |= (uint32_t)0x00000001;
|
||||
RCC->CFGR0 &= (uint32_t)0xF8FF0000;
|
||||
RCC->CTLR &= (uint32_t)0xFEF6FFFF;
|
||||
RCC->CTLR &= (uint32_t)0xFFFBFFFF;
|
||||
RCC->CFGR0 &= (uint32_t)0xFF80FFFF;
|
||||
RCC->INTR = 0x009F0000;
|
||||
SetSysClock();
|
||||
}
|
||||
|
||||
|
||||
/*********************************************************************
|
||||
* @fn SystemCoreClockUpdate
|
||||
*
|
||||
* @brief Update SystemCoreClock variable according to Clock Register Values.
|
||||
*
|
||||
* @return none
|
||||
*/
|
||||
void SystemCoreClockUpdate (void)
|
||||
{
|
||||
uint32_t tmp = 0, pllmull = 0, pllsource = 0, Pll_6_5 = 0;
|
||||
|
||||
tmp = RCC->CFGR0 & RCC_SWS;
|
||||
|
||||
switch (tmp)
|
||||
{
|
||||
case 0x00:
|
||||
SystemCoreClock = HSI_VALUE;
|
||||
break;
|
||||
case 0x04:
|
||||
SystemCoreClock = HSE_VALUE;
|
||||
break;
|
||||
case 0x08:
|
||||
pllmull = RCC->CFGR0 & RCC_PLLMULL;
|
||||
pllsource = RCC->CFGR0 & RCC_PLLSRC;
|
||||
pllmull = ( pllmull >> 18) + 2;
|
||||
|
||||
if(pllmull == 17) pllmull = 18;
|
||||
|
||||
if (pllsource == 0x00)
|
||||
{
|
||||
if(EXTEN->EXTEN_CTR & EXTEN_PLL_HSI_PRE){
|
||||
SystemCoreClock = HSI_VALUE * pllmull;
|
||||
}
|
||||
else{
|
||||
SystemCoreClock = (HSI_VALUE >> 1) * pllmull;
|
||||
}
|
||||
}
|
||||
else
|
||||
{
|
||||
#if defined (CH32V20x_D8W)
|
||||
if((RCC->CFGR0 & (3<<22)) == (3<<22))
|
||||
{
|
||||
SystemCoreClock = ((HSE_VALUE>>1)) * pllmull;
|
||||
}
|
||||
else
|
||||
#endif
|
||||
if ((RCC->CFGR0 & RCC_PLLXTPRE) != (uint32_t)RESET)
|
||||
{
|
||||
#if defined (CH32V20x_D8) || defined (CH32V20x_D8W)
|
||||
SystemCoreClock = ((HSE_VALUE>>2) >> 1) * pllmull;
|
||||
#else
|
||||
SystemCoreClock = (HSE_VALUE >> 1) * pllmull;
|
||||
#endif
|
||||
}
|
||||
else
|
||||
{
|
||||
#if defined (CH32V20x_D8) || defined (CH32V20x_D8W)
|
||||
SystemCoreClock = (HSE_VALUE>>2) * pllmull;
|
||||
#else
|
||||
SystemCoreClock = HSE_VALUE * pllmull;
|
||||
#endif
|
||||
}
|
||||
}
|
||||
|
||||
if(Pll_6_5 == 1) SystemCoreClock = (SystemCoreClock / 2);
|
||||
|
||||
break;
|
||||
default:
|
||||
SystemCoreClock = HSI_VALUE;
|
||||
break;
|
||||
}
|
||||
|
||||
tmp = AHBPrescTable[((RCC->CFGR0 & RCC_HPRE) >> 4)];
|
||||
SystemCoreClock >>= tmp;
|
||||
}
|
||||
|
||||
/*********************************************************************
|
||||
* @fn SetSysClock
|
||||
*
|
||||
* @brief Configures the System clock frequency, HCLK, PCLK2 and PCLK1 prescalers.
|
||||
*
|
||||
* @return none
|
||||
*/
|
||||
static void SetSysClock(void)
|
||||
{
|
||||
#ifdef SYSCLK_FREQ_HSE
|
||||
SetSysClockToHSE();
|
||||
#elif defined SYSCLK_FREQ_48MHz_HSE
|
||||
SetSysClockTo48_HSE();
|
||||
#elif defined SYSCLK_FREQ_56MHz_HSE
|
||||
SetSysClockTo56_HSE();
|
||||
#elif defined SYSCLK_FREQ_72MHz_HSE
|
||||
SetSysClockTo72_HSE();
|
||||
#elif defined SYSCLK_FREQ_96MHz_HSE
|
||||
SetSysClockTo96_HSE();
|
||||
#elif defined SYSCLK_FREQ_120MHz_HSE
|
||||
SetSysClockTo120_HSE();
|
||||
#elif defined SYSCLK_FREQ_144MHz_HSE
|
||||
SetSysClockTo144_HSE();
|
||||
#elif defined SYSCLK_FREQ_48MHz_HSI
|
||||
SetSysClockTo48_HSI();
|
||||
#elif defined SYSCLK_FREQ_56MHz_HSI
|
||||
SetSysClockTo56_HSI();
|
||||
#elif defined SYSCLK_FREQ_72MHz_HSI
|
||||
SetSysClockTo72_HSI();
|
||||
#elif defined SYSCLK_FREQ_96MHz_HSI
|
||||
SetSysClockTo96_HSI();
|
||||
#elif defined SYSCLK_FREQ_120MHz_HSI
|
||||
SetSysClockTo120_HSI();
|
||||
#elif defined SYSCLK_FREQ_144MHz_HSI
|
||||
SetSysClockTo144_HSI();
|
||||
|
||||
#endif
|
||||
|
||||
/* If none of the define above is enabled, the HSI is used as System clock
|
||||
* source (default after reset)
|
||||
*/
|
||||
}
|
||||
|
||||
|
||||
#ifdef SYSCLK_FREQ_HSE
|
||||
|
||||
/*********************************************************************
|
||||
* @fn SetSysClockToHSE
|
||||
*
|
||||
* @brief Sets HSE as System clock source and configure HCLK, PCLK2 and PCLK1 prescalers.
|
||||
*
|
||||
* @return none
|
||||
*/
|
||||
static void SetSysClockToHSE(void)
|
||||
{
|
||||
__IO uint32_t StartUpCounter = 0, HSEStatus = 0;
|
||||
|
||||
|
||||
RCC->CTLR |= ((uint32_t)RCC_HSEON);
|
||||
|
||||
/* Wait till HSE is ready and if Time out is reached exit */
|
||||
do
|
||||
{
|
||||
HSEStatus = RCC->CTLR & RCC_HSERDY;
|
||||
StartUpCounter++;
|
||||
} while((HSEStatus == 0) && (StartUpCounter != HSE_STARTUP_TIMEOUT));
|
||||
|
||||
if ((RCC->CTLR & RCC_HSERDY) != RESET)
|
||||
{
|
||||
HSEStatus = (uint32_t)0x01;
|
||||
}
|
||||
else
|
||||
{
|
||||
HSEStatus = (uint32_t)0x00;
|
||||
}
|
||||
|
||||
if (HSEStatus == (uint32_t)0x01)
|
||||
{
|
||||
/* HCLK = SYSCLK */
|
||||
RCC->CFGR0 |= (uint32_t)RCC_HPRE_DIV1;
|
||||
/* PCLK2 = HCLK */
|
||||
RCC->CFGR0 |= (uint32_t)RCC_PPRE2_DIV1;
|
||||
/* PCLK1 = HCLK */
|
||||
RCC->CFGR0 |= (uint32_t)RCC_PPRE1_DIV1;
|
||||
|
||||
/* Select HSE as system clock source
|
||||
* CH32V20x_D6 (HSE=8MHZ)
|
||||
* CH32V20x_D8 (HSE=32MHZ)
|
||||
* CH32V20x_D8W (HSE=32MHZ)
|
||||
*/
|
||||
RCC->CFGR0 &= (uint32_t)((uint32_t)~(RCC_SW));
|
||||
RCC->CFGR0 |= (uint32_t)RCC_SW_HSE;
|
||||
|
||||
/* Wait till HSE is used as system clock source */
|
||||
while ((RCC->CFGR0 & (uint32_t)RCC_SWS) != (uint32_t)0x04)
|
||||
{
|
||||
}
|
||||
}
|
||||
else
|
||||
{
|
||||
/* If HSE fails to start-up, the application will have wrong clock
|
||||
* configuration. User can add here some code to deal with this error
|
||||
*/
|
||||
}
|
||||
}
|
||||
|
||||
#elif defined SYSCLK_FREQ_48MHz_HSE
|
||||
|
||||
/*********************************************************************
|
||||
* @fn SetSysClockTo48_HSE
|
||||
*
|
||||
* @brief Sets System clock frequency to 48MHz and configure HCLK, PCLK2 and PCLK1 prescalers.
|
||||
*
|
||||
* @return none
|
||||
*/
|
||||
static void SetSysClockTo48_HSE(void)
|
||||
{
|
||||
__IO uint32_t StartUpCounter = 0, HSEStatus = 0;
|
||||
|
||||
|
||||
RCC->CTLR |= ((uint32_t)RCC_HSEON);
|
||||
/* Wait till HSE is ready and if Time out is reached exit */
|
||||
do
|
||||
{
|
||||
HSEStatus = RCC->CTLR & RCC_HSERDY;
|
||||
StartUpCounter++;
|
||||
} while((HSEStatus == 0) && (StartUpCounter != HSE_STARTUP_TIMEOUT));
|
||||
|
||||
if ((RCC->CTLR & RCC_HSERDY) != RESET)
|
||||
{
|
||||
HSEStatus = (uint32_t)0x01;
|
||||
}
|
||||
else
|
||||
{
|
||||
HSEStatus = (uint32_t)0x00;
|
||||
}
|
||||
|
||||
if (HSEStatus == (uint32_t)0x01)
|
||||
{
|
||||
/* HCLK = SYSCLK */
|
||||
RCC->CFGR0 |= (uint32_t)RCC_HPRE_DIV1;
|
||||
/* PCLK2 = HCLK */
|
||||
RCC->CFGR0 |= (uint32_t)RCC_PPRE2_DIV1;
|
||||
/* PCLK1 = HCLK */
|
||||
RCC->CFGR0 |= (uint32_t)RCC_PPRE1_DIV2;
|
||||
|
||||
/* CH32V20x_D6-PLL configuration: PLLCLK = HSE * 6 = 48 MHz (HSE=8MHZ)
|
||||
* CH32V20x_D8-PLL configuration: PLLCLK = HSE/4 * 6 = 48 MHz (HSE=32MHZ)
|
||||
* CH32V20x_D8W-PLL configuration: PLLCLK = HSE/4 * 6 = 48 MHz (HSE=32MHZ)
|
||||
*/
|
||||
RCC->CFGR0 &= (uint32_t)((uint32_t)~(RCC_PLLSRC | RCC_PLLXTPRE | RCC_PLLMULL));
|
||||
|
||||
RCC->CFGR0 |= (uint32_t)(RCC_PLLSRC_HSE | RCC_PLLXTPRE_HSE | RCC_PLLMULL6);
|
||||
|
||||
/* Enable PLL */
|
||||
RCC->CTLR |= RCC_PLLON;
|
||||
/* Wait till PLL is ready */
|
||||
while((RCC->CTLR & RCC_PLLRDY) == 0)
|
||||
{
|
||||
}
|
||||
/* Select PLL as system clock source */
|
||||
RCC->CFGR0 &= (uint32_t)((uint32_t)~(RCC_SW));
|
||||
RCC->CFGR0 |= (uint32_t)RCC_SW_PLL;
|
||||
/* Wait till PLL is used as system clock source */
|
||||
while ((RCC->CFGR0 & (uint32_t)RCC_SWS) != (uint32_t)0x08)
|
||||
{
|
||||
}
|
||||
}
|
||||
else
|
||||
{
|
||||
/*
|
||||
* If HSE fails to start-up, the application will have wrong clock
|
||||
* configuration. User can add here some code to deal with this error
|
||||
*/
|
||||
}
|
||||
}
|
||||
|
||||
#elif defined SYSCLK_FREQ_56MHz_HSE
|
||||
|
||||
/*********************************************************************
|
||||
* @fn SetSysClockTo56_HSE
|
||||
*
|
||||
* @brief Sets System clock frequency to 56MHz and configure HCLK, PCLK2 and PCLK1 prescalers.
|
||||
*
|
||||
* @return none
|
||||
*/
|
||||
static void SetSysClockTo56_HSE(void)
|
||||
{
|
||||
__IO uint32_t StartUpCounter = 0, HSEStatus = 0;
|
||||
|
||||
RCC->CTLR |= ((uint32_t)RCC_HSEON);
|
||||
|
||||
/* Wait till HSE is ready and if Time out is reached exit */
|
||||
do
|
||||
{
|
||||
HSEStatus = RCC->CTLR & RCC_HSERDY;
|
||||
StartUpCounter++;
|
||||
} while((HSEStatus == 0) && (StartUpCounter != HSE_STARTUP_TIMEOUT));
|
||||
|
||||
if ((RCC->CTLR & RCC_HSERDY) != RESET)
|
||||
{
|
||||
HSEStatus = (uint32_t)0x01;
|
||||
}
|
||||
else
|
||||
{
|
||||
HSEStatus = (uint32_t)0x00;
|
||||
}
|
||||
|
||||
if (HSEStatus == (uint32_t)0x01)
|
||||
{
|
||||
/* HCLK = SYSCLK */
|
||||
RCC->CFGR0 |= (uint32_t)RCC_HPRE_DIV1;
|
||||
/* PCLK2 = HCLK */
|
||||
RCC->CFGR0 |= (uint32_t)RCC_PPRE2_DIV1;
|
||||
/* PCLK1 = HCLK */
|
||||
RCC->CFGR0 |= (uint32_t)RCC_PPRE1_DIV2;
|
||||
|
||||
/* CH32V20x_D6-PLL configuration: PLLCLK = HSE * 7 = 56 MHz (HSE=8MHZ)
|
||||
* CH32V20x_D8-PLL configuration: PLLCLK = HSE/4 * 7 = 56 MHz (HSE=32MHZ)
|
||||
* CH32V20x_D8W-PLL configuration: PLLCLK = HSE/4 * 7 = 56 MHz (HSE=32MHZ)
|
||||
*/
|
||||
RCC->CFGR0 &= (uint32_t)((uint32_t)~(RCC_PLLSRC | RCC_PLLXTPRE | RCC_PLLMULL));
|
||||
|
||||
RCC->CFGR0 |= (uint32_t)(RCC_PLLSRC_HSE | RCC_PLLXTPRE_HSE | RCC_PLLMULL7);
|
||||
|
||||
/* Enable PLL */
|
||||
RCC->CTLR |= RCC_PLLON;
|
||||
/* Wait till PLL is ready */
|
||||
while((RCC->CTLR & RCC_PLLRDY) == 0)
|
||||
{
|
||||
}
|
||||
|
||||
/* Select PLL as system clock source */
|
||||
RCC->CFGR0 &= (uint32_t)((uint32_t)~(RCC_SW));
|
||||
RCC->CFGR0 |= (uint32_t)RCC_SW_PLL;
|
||||
/* Wait till PLL is used as system clock source */
|
||||
while ((RCC->CFGR0 & (uint32_t)RCC_SWS) != (uint32_t)0x08)
|
||||
{
|
||||
}
|
||||
}
|
||||
else
|
||||
{
|
||||
/*
|
||||
* If HSE fails to start-up, the application will have wrong clock
|
||||
* configuration. User can add here some code to deal with this error
|
||||
*/
|
||||
}
|
||||
}
|
||||
|
||||
#elif defined SYSCLK_FREQ_72MHz_HSE
|
||||
|
||||
/*********************************************************************
|
||||
* @fn SetSysClockTo72_HSE
|
||||
*
|
||||
* @brief Sets System clock frequency to 72MHz and configure HCLK, PCLK2 and PCLK1 prescalers.
|
||||
*
|
||||
* @return none
|
||||
*/
|
||||
static void SetSysClockTo72_HSE(void)
|
||||
{
|
||||
__IO uint32_t StartUpCounter = 0, HSEStatus = 0;
|
||||
|
||||
RCC->CTLR |= ((uint32_t)RCC_HSEON);
|
||||
|
||||
/* Wait till HSE is ready and if Time out is reached exit */
|
||||
do
|
||||
{
|
||||
HSEStatus = RCC->CTLR & RCC_HSERDY;
|
||||
StartUpCounter++;
|
||||
} while((HSEStatus == 0) && (StartUpCounter != HSE_STARTUP_TIMEOUT));
|
||||
|
||||
if ((RCC->CTLR & RCC_HSERDY) != RESET)
|
||||
{
|
||||
HSEStatus = (uint32_t)0x01;
|
||||
}
|
||||
else
|
||||
{
|
||||
HSEStatus = (uint32_t)0x00;
|
||||
}
|
||||
|
||||
if (HSEStatus == (uint32_t)0x01)
|
||||
{
|
||||
/* HCLK = SYSCLK */
|
||||
RCC->CFGR0 |= (uint32_t)RCC_HPRE_DIV1;
|
||||
/* PCLK2 = HCLK */
|
||||
RCC->CFGR0 |= (uint32_t)RCC_PPRE2_DIV1;
|
||||
/* PCLK1 = HCLK */
|
||||
RCC->CFGR0 |= (uint32_t)RCC_PPRE1_DIV2;
|
||||
|
||||
/* CH32V20x_D6-PLL configuration: PLLCLK = HSE * 9 = 72 MHz (HSE=8MHZ)
|
||||
* CH32V20x_D8-PLL configuration: PLLCLK = HSE/4 * 9 = 72 MHz (HSE=32MHZ)
|
||||
* CH32V20x_D8W-PLL configuration: PLLCLK = HSE/4 * 9 = 72 MHz (HSE=32MHZ)
|
||||
*/
|
||||
RCC->CFGR0 &= (uint32_t)((uint32_t)~(RCC_PLLSRC | RCC_PLLXTPRE |
|
||||
RCC_PLLMULL));
|
||||
|
||||
RCC->CFGR0 |= (uint32_t)(RCC_PLLSRC_HSE | RCC_PLLXTPRE_HSE | RCC_PLLMULL9);
|
||||
|
||||
/* Enable PLL */
|
||||
RCC->CTLR |= RCC_PLLON;
|
||||
/* Wait till PLL is ready */
|
||||
while((RCC->CTLR & RCC_PLLRDY) == 0)
|
||||
{
|
||||
}
|
||||
/* Select PLL as system clock source */
|
||||
RCC->CFGR0 &= (uint32_t)((uint32_t)~(RCC_SW));
|
||||
RCC->CFGR0 |= (uint32_t)RCC_SW_PLL;
|
||||
/* Wait till PLL is used as system clock source */
|
||||
while ((RCC->CFGR0 & (uint32_t)RCC_SWS) != (uint32_t)0x08)
|
||||
{
|
||||
}
|
||||
}
|
||||
else
|
||||
{
|
||||
/*
|
||||
* If HSE fails to start-up, the application will have wrong clock
|
||||
* configuration. User can add here some code to deal with this error
|
||||
*/
|
||||
}
|
||||
}
|
||||
|
||||
|
||||
#elif defined SYSCLK_FREQ_96MHz_HSE
|
||||
|
||||
/*********************************************************************
|
||||
* @fn SetSysClockTo96_HSE
|
||||
*
|
||||
* @brief Sets System clock frequency to 96MHz and configure HCLK, PCLK2 and PCLK1 prescalers.
|
||||
*
|
||||
* @return none
|
||||
*/
|
||||
static void SetSysClockTo96_HSE(void)
|
||||
{
|
||||
__IO uint32_t StartUpCounter = 0, HSEStatus = 0;
|
||||
|
||||
RCC->CTLR |= ((uint32_t)RCC_HSEON);
|
||||
|
||||
/* Wait till HSE is ready and if Time out is reached exit */
|
||||
do
|
||||
{
|
||||
HSEStatus = RCC->CTLR & RCC_HSERDY;
|
||||
StartUpCounter++;
|
||||
} while((HSEStatus == 0) && (StartUpCounter != HSE_STARTUP_TIMEOUT));
|
||||
|
||||
if ((RCC->CTLR & RCC_HSERDY) != RESET)
|
||||
{
|
||||
HSEStatus = (uint32_t)0x01;
|
||||
}
|
||||
else
|
||||
{
|
||||
HSEStatus = (uint32_t)0x00;
|
||||
}
|
||||
|
||||
if (HSEStatus == (uint32_t)0x01)
|
||||
{
|
||||
/* HCLK = SYSCLK */
|
||||
RCC->CFGR0 |= (uint32_t)RCC_HPRE_DIV1;
|
||||
/* PCLK2 = HCLK */
|
||||
RCC->CFGR0 |= (uint32_t)RCC_PPRE2_DIV1;
|
||||
/* PCLK1 = HCLK */
|
||||
RCC->CFGR0 |= (uint32_t)RCC_PPRE1_DIV2;
|
||||
|
||||
/* CH32V20x_D6-PLL configuration: PLLCLK = HSE * 12 = 96 MHz (HSE=8MHZ)
|
||||
* CH32V20x_D8-PLL configuration: PLLCLK = HSE/4 * 12 = 96 MHz (HSE=32MHZ)
|
||||
* CH32V20x_D8W-PLL configuration: PLLCLK = HSE/4 * 12 = 96 MHz (HSE=32MHZ)
|
||||
*/
|
||||
RCC->CFGR0 &= (uint32_t)((uint32_t)~(RCC_PLLSRC | RCC_PLLXTPRE |
|
||||
RCC_PLLMULL));
|
||||
|
||||
RCC->CFGR0 |= (uint32_t)(RCC_PLLSRC_HSE | RCC_PLLXTPRE_HSE | RCC_PLLMULL12);
|
||||
|
||||
/* Enable PLL */
|
||||
RCC->CTLR |= RCC_PLLON;
|
||||
/* Wait till PLL is ready */
|
||||
while((RCC->CTLR & RCC_PLLRDY) == 0)
|
||||
{
|
||||
}
|
||||
/* Select PLL as system clock source */
|
||||
RCC->CFGR0 &= (uint32_t)((uint32_t)~(RCC_SW));
|
||||
RCC->CFGR0 |= (uint32_t)RCC_SW_PLL;
|
||||
/* Wait till PLL is used as system clock source */
|
||||
while ((RCC->CFGR0 & (uint32_t)RCC_SWS) != (uint32_t)0x08)
|
||||
{
|
||||
}
|
||||
}
|
||||
else
|
||||
{
|
||||
/*
|
||||
* If HSE fails to start-up, the application will have wrong clock
|
||||
* configuration. User can add here some code to deal with this error
|
||||
*/
|
||||
}
|
||||
}
|
||||
|
||||
|
||||
#elif defined SYSCLK_FREQ_120MHz_HSE
|
||||
|
||||
/*********************************************************************
|
||||
* @fn SetSysClockTo120_HSE
|
||||
*
|
||||
* @brief Sets System clock frequency to 120MHz and configure HCLK, PCLK2 and PCLK1 prescalers.
|
||||
*
|
||||
* @return none
|
||||
*/
|
||||
static void SetSysClockTo120_HSE(void)
|
||||
{
|
||||
__IO uint32_t StartUpCounter = 0, HSEStatus = 0;
|
||||
|
||||
RCC->CTLR |= ((uint32_t)RCC_HSEON);
|
||||
|
||||
/* Wait till HSE is ready and if Time out is reached exit */
|
||||
do
|
||||
{
|
||||
HSEStatus = RCC->CTLR & RCC_HSERDY;
|
||||
StartUpCounter++;
|
||||
} while((HSEStatus == 0) && (StartUpCounter != HSE_STARTUP_TIMEOUT));
|
||||
|
||||
if((RCC->CTLR & RCC_HSERDY) != RESET)
|
||||
{
|
||||
HSEStatus = (uint32_t)0x01;
|
||||
}
|
||||
else
|
||||
{
|
||||
HSEStatus = (uint32_t)0x00;
|
||||
}
|
||||
|
||||
if(HSEStatus == (uint32_t)0x01)
|
||||
{
|
||||
#if defined (CH32V20x_D8W)
|
||||
RCC->CFGR0 |= (uint32_t)(3<<22);
|
||||
/* HCLK = SYSCLK/2 */
|
||||
RCC->CFGR0 |= (uint32_t)RCC_HPRE_DIV2;
|
||||
#else
|
||||
/* HCLK = SYSCLK */
|
||||
RCC->CFGR0 |= (uint32_t)RCC_HPRE_DIV1;
|
||||
#endif
|
||||
/* PCLK2 = HCLK */
|
||||
RCC->CFGR0 |= (uint32_t)RCC_PPRE2_DIV1;
|
||||
/* PCLK1 = HCLK */
|
||||
RCC->CFGR0 |= (uint32_t)RCC_PPRE1_DIV2;
|
||||
|
||||
/* CH32V20x_D6-PLL configuration: PLLCLK = HSE * 15 = 120 MHz (HSE=8MHZ)
|
||||
* CH32V20x_D8-PLL configuration: PLLCLK = HSE/4 * 15 = 120 MHz (HSE=32MHZ)
|
||||
* CH32V20x_D8W-PLL configuration: PLLCLK = HSE/2 * 15 = 240 MHz (HSE=32MHZ)
|
||||
*/
|
||||
RCC->CFGR0 &= (uint32_t)((uint32_t) ~(RCC_PLLSRC | RCC_PLLXTPRE |
|
||||
RCC_PLLMULL));
|
||||
|
||||
RCC->CFGR0 |= (uint32_t)(RCC_PLLSRC_HSE | RCC_PLLXTPRE_HSE | RCC_PLLMULL15);
|
||||
|
||||
/* Enable PLL */
|
||||
RCC->CTLR |= RCC_PLLON;
|
||||
/* Wait till PLL is ready */
|
||||
while((RCC->CTLR & RCC_PLLRDY) == 0)
|
||||
{
|
||||
}
|
||||
/* Select PLL as system clock source */
|
||||
RCC->CFGR0 &= (uint32_t)((uint32_t) ~(RCC_SW));
|
||||
RCC->CFGR0 |= (uint32_t)RCC_SW_PLL;
|
||||
/* Wait till PLL is used as system clock source */
|
||||
while((RCC->CFGR0 & (uint32_t)RCC_SWS) != (uint32_t)0x08)
|
||||
{
|
||||
}
|
||||
}
|
||||
else
|
||||
{
|
||||
/*
|
||||
* If HSE fails to start-up, the application will have wrong clock
|
||||
* configuration. User can add here some code to deal with this error
|
||||
*/
|
||||
}
|
||||
}
|
||||
#elif defined SYSCLK_FREQ_144MHz_HSE
|
||||
|
||||
/*********************************************************************
|
||||
* @fn SetSysClockTo144_HSE
|
||||
*
|
||||
* @brief Sets System clock frequency to 144MHz and configure HCLK, PCLK2 and PCLK1 prescalers.
|
||||
*
|
||||
* @return none
|
||||
*/
|
||||
static void SetSysClockTo144_HSE(void)
|
||||
{
|
||||
__IO uint32_t StartUpCounter = 0, HSEStatus = 0;
|
||||
|
||||
RCC->CTLR |= ((uint32_t)RCC_HSEON);
|
||||
|
||||
/* Wait till HSE is ready and if Time out is reached exit */
|
||||
do
|
||||
{
|
||||
HSEStatus = RCC->CTLR & RCC_HSERDY;
|
||||
StartUpCounter++;
|
||||
} while((HSEStatus == 0) && (StartUpCounter != HSE_STARTUP_TIMEOUT));
|
||||
|
||||
if ((RCC->CTLR & RCC_HSERDY) != RESET)
|
||||
{
|
||||
HSEStatus = (uint32_t)0x01;
|
||||
}
|
||||
else
|
||||
{
|
||||
HSEStatus = (uint32_t)0x00;
|
||||
}
|
||||
|
||||
if (HSEStatus == (uint32_t)0x01)
|
||||
{
|
||||
/* HCLK = SYSCLK */
|
||||
RCC->CFGR0 |= (uint32_t)RCC_HPRE_DIV1;
|
||||
/* PCLK2 = HCLK */
|
||||
RCC->CFGR0 |= (uint32_t)RCC_PPRE2_DIV1;
|
||||
/* PCLK1 = HCLK */
|
||||
RCC->CFGR0 |= (uint32_t)RCC_PPRE1_DIV2;
|
||||
|
||||
/* CH32V20x_D6-PLL configuration: PLLCLK = HSE * 18 = 144 MHz (HSE=8MHZ)
|
||||
* CH32V20x_D8-PLL configuration: PLLCLK = HSE/4 * 18 = 144 MHz (HSE=32MHZ)
|
||||
* CH32V20x_D8W-PLL configuration: PLLCLK = HSE/4 * 18 = 144 MHz (HSE=32MHZ)
|
||||
*/
|
||||
RCC->CFGR0 &= (uint32_t)((uint32_t)~(RCC_PLLSRC | RCC_PLLXTPRE |
|
||||
RCC_PLLMULL));
|
||||
|
||||
RCC->CFGR0 |= (uint32_t)(RCC_PLLSRC_HSE | RCC_PLLXTPRE_HSE | RCC_PLLMULL18);
|
||||
|
||||
/* Enable PLL */
|
||||
RCC->CTLR |= RCC_PLLON;
|
||||
/* Wait till PLL is ready */
|
||||
while((RCC->CTLR & RCC_PLLRDY) == 0)
|
||||
{
|
||||
}
|
||||
/* Select PLL as system clock source */
|
||||
RCC->CFGR0 &= (uint32_t)((uint32_t)~(RCC_SW));
|
||||
RCC->CFGR0 |= (uint32_t)RCC_SW_PLL;
|
||||
/* Wait till PLL is used as system clock source */
|
||||
while ((RCC->CFGR0 & (uint32_t)RCC_SWS) != (uint32_t)0x08)
|
||||
{
|
||||
}
|
||||
}
|
||||
else
|
||||
{
|
||||
/*
|
||||
* If HSE fails to start-up, the application will have wrong clock
|
||||
* configuration. User can add here some code to deal with this error
|
||||
*/
|
||||
}
|
||||
}
|
||||
|
||||
#elif defined SYSCLK_FREQ_48MHz_HSI
|
||||
|
||||
/*********************************************************************
|
||||
* @fn SetSysClockTo48_HSI
|
||||
*
|
||||
* @brief Sets System clock frequency to 48MHz and configure HCLK, PCLK2 and PCLK1 prescalers.
|
||||
*
|
||||
* @return none
|
||||
*/
|
||||
static void SetSysClockTo48_HSI(void)
|
||||
{
|
||||
EXTEN->EXTEN_CTR |= EXTEN_PLL_HSI_PRE;
|
||||
|
||||
/* HCLK = SYSCLK */
|
||||
RCC->CFGR0 |= (uint32_t)RCC_HPRE_DIV1;
|
||||
/* PCLK2 = HCLK */
|
||||
RCC->CFGR0 |= (uint32_t)RCC_PPRE2_DIV1;
|
||||
/* PCLK1 = HCLK */
|
||||
RCC->CFGR0 |= (uint32_t)RCC_PPRE1_DIV2;
|
||||
|
||||
/* PLL configuration: PLLCLK = HSI * 6 = 48 MHz */
|
||||
RCC->CFGR0 &= (uint32_t)((uint32_t)~(RCC_PLLSRC | RCC_PLLXTPRE | RCC_PLLMULL));
|
||||
|
||||
RCC->CFGR0 |= (uint32_t)(RCC_PLLSRC_HSI_Div2 | RCC_PLLMULL6);
|
||||
|
||||
/* Enable PLL */
|
||||
RCC->CTLR |= RCC_PLLON;
|
||||
/* Wait till PLL is ready */
|
||||
while((RCC->CTLR & RCC_PLLRDY) == 0)
|
||||
{
|
||||
}
|
||||
/* Select PLL as system clock source */
|
||||
RCC->CFGR0 &= (uint32_t)((uint32_t)~(RCC_SW));
|
||||
RCC->CFGR0 |= (uint32_t)RCC_SW_PLL;
|
||||
/* Wait till PLL is used as system clock source */
|
||||
while ((RCC->CFGR0 & (uint32_t)RCC_SWS) != (uint32_t)0x08)
|
||||
{
|
||||
}
|
||||
}
|
||||
|
||||
#elif defined SYSCLK_FREQ_56MHz_HSI
|
||||
|
||||
/*********************************************************************
|
||||
* @fn SetSysClockTo56_HSI
|
||||
*
|
||||
* @brief Sets System clock frequency to 56MHz and configure HCLK, PCLK2 and PCLK1 prescalers.
|
||||
*
|
||||
* @return none
|
||||
*/
|
||||
static void SetSysClockTo56_HSI(void)
|
||||
{
|
||||
EXTEN->EXTEN_CTR |= EXTEN_PLL_HSI_PRE;
|
||||
|
||||
/* HCLK = SYSCLK */
|
||||
RCC->CFGR0 |= (uint32_t)RCC_HPRE_DIV1;
|
||||
/* PCLK2 = HCLK */
|
||||
RCC->CFGR0 |= (uint32_t)RCC_PPRE2_DIV1;
|
||||
/* PCLK1 = HCLK */
|
||||
RCC->CFGR0 |= (uint32_t)RCC_PPRE1_DIV2;
|
||||
|
||||
/* PLL configuration: PLLCLK = HSI * 7 = 48 MHz */
|
||||
RCC->CFGR0 &= (uint32_t)((uint32_t)~(RCC_PLLSRC | RCC_PLLXTPRE | RCC_PLLMULL));
|
||||
|
||||
RCC->CFGR0 |= (uint32_t)(RCC_PLLSRC_HSI_Div2 | RCC_PLLMULL7);
|
||||
|
||||
/* Enable PLL */
|
||||
RCC->CTLR |= RCC_PLLON;
|
||||
/* Wait till PLL is ready */
|
||||
while((RCC->CTLR & RCC_PLLRDY) == 0)
|
||||
{
|
||||
}
|
||||
/* Select PLL as system clock source */
|
||||
RCC->CFGR0 &= (uint32_t)((uint32_t)~(RCC_SW));
|
||||
RCC->CFGR0 |= (uint32_t)RCC_SW_PLL;
|
||||
/* Wait till PLL is used as system clock source */
|
||||
while ((RCC->CFGR0 & (uint32_t)RCC_SWS) != (uint32_t)0x08)
|
||||
{
|
||||
}
|
||||
}
|
||||
|
||||
#elif defined SYSCLK_FREQ_72MHz_HSI
|
||||
|
||||
/*********************************************************************
|
||||
* @fn SetSysClockTo72_HSI
|
||||
*
|
||||
* @brief Sets System clock frequency to 72MHz and configure HCLK, PCLK2 and PCLK1 prescalers.
|
||||
*
|
||||
* @return none
|
||||
*/
|
||||
static void SetSysClockTo72_HSI(void)
|
||||
{
|
||||
EXTEN->EXTEN_CTR |= EXTEN_PLL_HSI_PRE;
|
||||
|
||||
/* HCLK = SYSCLK */
|
||||
RCC->CFGR0 |= (uint32_t)RCC_HPRE_DIV1;
|
||||
/* PCLK2 = HCLK */
|
||||
RCC->CFGR0 |= (uint32_t)RCC_PPRE2_DIV1;
|
||||
/* PCLK1 = HCLK */
|
||||
RCC->CFGR0 |= (uint32_t)RCC_PPRE1_DIV2;
|
||||
|
||||
/* PLL configuration: PLLCLK = HSI * 9 = 72 MHz */
|
||||
RCC->CFGR0 &= (uint32_t)((uint32_t)~(RCC_PLLSRC | RCC_PLLXTPRE | RCC_PLLMULL));
|
||||
|
||||
RCC->CFGR0 |= (uint32_t)(RCC_PLLSRC_HSI_Div2 | RCC_PLLMULL9);
|
||||
|
||||
/* Enable PLL */
|
||||
RCC->CTLR |= RCC_PLLON;
|
||||
/* Wait till PLL is ready */
|
||||
while((RCC->CTLR & RCC_PLLRDY) == 0)
|
||||
{
|
||||
}
|
||||
/* Select PLL as system clock source */
|
||||
RCC->CFGR0 &= (uint32_t)((uint32_t)~(RCC_SW));
|
||||
RCC->CFGR0 |= (uint32_t)RCC_SW_PLL;
|
||||
/* Wait till PLL is used as system clock source */
|
||||
while ((RCC->CFGR0 & (uint32_t)RCC_SWS) != (uint32_t)0x08)
|
||||
{
|
||||
}
|
||||
}
|
||||
|
||||
|
||||
#elif defined SYSCLK_FREQ_96MHz_HSI
|
||||
|
||||
/*********************************************************************
|
||||
* @fn SetSysClockTo96_HSI
|
||||
*
|
||||
* @brief Sets System clock frequency to 96MHz and configure HCLK, PCLK2 and PCLK1 prescalers.
|
||||
*
|
||||
* @return none
|
||||
*/
|
||||
static void SetSysClockTo96_HSI(void)
|
||||
{
|
||||
EXTEN->EXTEN_CTR |= EXTEN_PLL_HSI_PRE;
|
||||
|
||||
/* HCLK = SYSCLK */
|
||||
RCC->CFGR0 |= (uint32_t)RCC_HPRE_DIV1;
|
||||
/* PCLK2 = HCLK */
|
||||
RCC->CFGR0 |= (uint32_t)RCC_PPRE2_DIV1;
|
||||
/* PCLK1 = HCLK */
|
||||
RCC->CFGR0 |= (uint32_t)RCC_PPRE1_DIV2;
|
||||
|
||||
/* PLL configuration: PLLCLK = HSI * 12 = 96 MHz */
|
||||
RCC->CFGR0 &= (uint32_t)((uint32_t)~(RCC_PLLSRC | RCC_PLLXTPRE | RCC_PLLMULL));
|
||||
|
||||
RCC->CFGR0 |= (uint32_t)(RCC_PLLSRC_HSI_Div2 | RCC_PLLMULL12);
|
||||
|
||||
/* Enable PLL */
|
||||
RCC->CTLR |= RCC_PLLON;
|
||||
/* Wait till PLL is ready */
|
||||
while((RCC->CTLR & RCC_PLLRDY) == 0)
|
||||
{
|
||||
}
|
||||
/* Select PLL as system clock source */
|
||||
RCC->CFGR0 &= (uint32_t)((uint32_t)~(RCC_SW));
|
||||
RCC->CFGR0 |= (uint32_t)RCC_SW_PLL;
|
||||
/* Wait till PLL is used as system clock source */
|
||||
while ((RCC->CFGR0 & (uint32_t)RCC_SWS) != (uint32_t)0x08)
|
||||
{
|
||||
}
|
||||
}
|
||||
|
||||
|
||||
#elif defined SYSCLK_FREQ_120MHz_HSI
|
||||
|
||||
/*********************************************************************
|
||||
* @fn SetSysClockTo120_HSI
|
||||
*
|
||||
* @brief Sets System clock frequency to 120MHz and configure HCLK, PCLK2 and PCLK1 prescalers.
|
||||
*
|
||||
* @return none
|
||||
*/
|
||||
static void SetSysClockTo120_HSI(void)
|
||||
{
|
||||
EXTEN->EXTEN_CTR |= EXTEN_PLL_HSI_PRE;
|
||||
|
||||
/* HCLK = SYSCLK */
|
||||
RCC->CFGR0 |= (uint32_t)RCC_HPRE_DIV1;
|
||||
/* PCLK2 = HCLK */
|
||||
RCC->CFGR0 |= (uint32_t)RCC_PPRE2_DIV1;
|
||||
/* PCLK1 = HCLK */
|
||||
RCC->CFGR0 |= (uint32_t)RCC_PPRE1_DIV2;
|
||||
|
||||
/* PLL configuration: PLLCLK = HSI * 15 = 120 MHz */
|
||||
RCC->CFGR0 &= (uint32_t)((uint32_t) ~(RCC_PLLSRC | RCC_PLLXTPRE |
|
||||
RCC_PLLMULL));
|
||||
|
||||
RCC->CFGR0 |= (uint32_t)(RCC_PLLSRC_HSI_Div2 | RCC_PLLMULL15);
|
||||
|
||||
/* Enable PLL */
|
||||
RCC->CTLR |= RCC_PLLON;
|
||||
/* Wait till PLL is ready */
|
||||
while((RCC->CTLR & RCC_PLLRDY) == 0)
|
||||
{
|
||||
}
|
||||
/* Select PLL as system clock source */
|
||||
RCC->CFGR0 &= (uint32_t)((uint32_t) ~(RCC_SW));
|
||||
RCC->CFGR0 |= (uint32_t)RCC_SW_PLL;
|
||||
/* Wait till PLL is used as system clock source */
|
||||
while((RCC->CFGR0 & (uint32_t)RCC_SWS) != (uint32_t)0x08)
|
||||
{
|
||||
}
|
||||
}
|
||||
#elif defined SYSCLK_FREQ_144MHz_HSI
|
||||
|
||||
/*********************************************************************
|
||||
* @fn SetSysClockTo144_HSI
|
||||
*
|
||||
* @brief Sets System clock frequency to 144MHz and configure HCLK, PCLK2 and PCLK1 prescalers.
|
||||
*
|
||||
* @return none
|
||||
*/
|
||||
static void SetSysClockTo144_HSI(void)
|
||||
{
|
||||
EXTEN->EXTEN_CTR |= EXTEN_PLL_HSI_PRE;
|
||||
|
||||
/* HCLK = SYSCLK */
|
||||
RCC->CFGR0 |= (uint32_t)RCC_HPRE_DIV1;
|
||||
/* PCLK2 = HCLK */
|
||||
RCC->CFGR0 |= (uint32_t)RCC_PPRE2_DIV1;
|
||||
/* PCLK1 = HCLK */
|
||||
RCC->CFGR0 |= (uint32_t)RCC_PPRE1_DIV2;
|
||||
|
||||
/* PLL configuration: PLLCLK = HSI * 18 = 144 MHz */
|
||||
RCC->CFGR0 &= (uint32_t)((uint32_t)~(RCC_PLLSRC | RCC_PLLXTPRE | RCC_PLLMULL));
|
||||
|
||||
RCC->CFGR0 |= (uint32_t)(RCC_PLLSRC_HSI_Div2 | RCC_PLLMULL18);
|
||||
|
||||
/* Enable PLL */
|
||||
RCC->CTLR |= RCC_PLLON;
|
||||
/* Wait till PLL is ready */
|
||||
while((RCC->CTLR & RCC_PLLRDY) == 0)
|
||||
{
|
||||
}
|
||||
/* Select PLL as system clock source */
|
||||
RCC->CFGR0 &= (uint32_t)((uint32_t)~(RCC_SW));
|
||||
RCC->CFGR0 |= (uint32_t)RCC_SW_PLL;
|
||||
/* Wait till PLL is used as system clock source */
|
||||
while ((RCC->CFGR0 & (uint32_t)RCC_SWS) != (uint32_t)0x08)
|
||||
{
|
||||
}
|
||||
}
|
||||
|
||||
|
||||
#endif
|
||||
@@ -0,0 +1,32 @@
|
||||
/********************************** (C) COPYRIGHT *******************************
|
||||
* File Name : system_ch32v20x.h
|
||||
* Author : WCH
|
||||
* Version : V1.0.0
|
||||
* Date : 2021/06/06
|
||||
* Description : CH32V20x Device Peripheral Access Layer System Header File.
|
||||
*********************************************************************************
|
||||
* Copyright (c) 2021 Nanjing Qinheng Microelectronics Co., Ltd.
|
||||
* Attention: This software (modified or not) and binary are used for
|
||||
* microcontroller manufactured by Nanjing Qinheng Microelectronics.
|
||||
*******************************************************************************/
|
||||
#ifndef __SYSTEM_ch32v20x_H
|
||||
#define __SYSTEM_ch32v20x_H
|
||||
|
||||
#ifdef __cplusplus
|
||||
extern "C" {
|
||||
#endif
|
||||
|
||||
extern uint32_t SystemCoreClock; /* System Clock Frequency (Core Clock) */
|
||||
|
||||
/* System_Exported_Functions */
|
||||
extern void SystemInit(void);
|
||||
extern void SystemCoreClockUpdate(void);
|
||||
|
||||
#ifdef __cplusplus
|
||||
}
|
||||
#endif
|
||||
|
||||
#endif /*__CH32V20x_SYSTEM_H */
|
||||
|
||||
|
||||
|
||||
Reference in New Issue
Block a user