/********************************** (C) COPYRIGHT *******************************
 * File Name          : main.c
 * Author             : WCH
 * Version            : V1.0.0
 * Date               : 2021/06/06
 * Description        : Main program body.
 *********************************************************************************
 * Copyright (c) 2021 Nanjing Qinheng Microelectronics Co., Ltd.
 * Attention: This software (modified or not) and binary are used for 
 * microcontroller manufactured by Nanjing Qinheng Microelectronics.
 *******************************************************************************/

/*
 *@Note
 *Get system-HCLK-AHB1-AHB2 clock routine:
 *MCO(PA8)
 *This example demonstrates MCO(PA8) pin output system clock and get clock;
 *    -RCC_GetClocksFreq() function to get systemclk-HCLK-AHB1-AHB2 clock
 *    -SystemCoreClockUpdate() function to get HCLK clock
 *    -Configure the HSE two-way frequency division as the PLL source in
 *    the system_ch32v20x.c file (applicable only to CH32V20x_D8W)
 *
 */

#include "debug.h"

/*********************************************************************
 * @fn      main
 *
 * @brief   Main program.
 *
 * @return  none
 */
int main(void)
{
    GPIO_InitTypeDef  GPIO_InitStructure={0};
    RCC_ClocksTypeDef RCC_ClocksStatus={0};

    NVIC_PriorityGroupConfig(NVIC_PriorityGroup_4);
    USART_Printf_Init(115200);
    SystemCoreClockUpdate();
    printf("SystemClk:%d\r\n",SystemCoreClock);
    printf( "ChipID:%08x\r\n", DBGMCU_GetCHIPID() );

    RCC_GetClocksFreq(&RCC_ClocksStatus);
    printf("SYSCLK_Frequency-%d\r\n", RCC_ClocksStatus.SYSCLK_Frequency);
    printf("HCLK_Frequency-%d\r\n", RCC_ClocksStatus.HCLK_Frequency);
    printf("PCLK1_Frequency-%d\r\n", RCC_ClocksStatus.PCLK1_Frequency);
    printf("PCLK2_Frequency-%d\r\n", RCC_ClocksStatus.PCLK2_Frequency);


    RCC_APB2PeriphClockCmd(RCC_APB2Periph_GPIOA, ENABLE);

    GPIO_InitStructure.GPIO_Pin = GPIO_Pin_8;
    GPIO_InitStructure.GPIO_Mode = GPIO_Mode_AF_PP;
    GPIO_InitStructure.GPIO_Speed = GPIO_Speed_50MHz;
    GPIO_Init(GPIOA, &GPIO_InitStructure);

    /* MCO Output GPIOA 8 */
    RCC_MCOConfig( RCC_MCO_SYSCLK );

    while(1);
}