/********************************** (C) COPYRIGHT *******************************
 * File Name          : main.c
 * Author             : WCH
 * Version            : V1.0.0
 * Date               : 2021/06/06
 * Description        : Main program body.
 *********************************************************************************
 * Copyright (c) 2021 Nanjing Qinheng Microelectronics Co., Ltd.
 * Attention: This software (modified or not) and binary are used for 
 * microcontroller manufactured by Nanjing Qinheng Microelectronics.
 *******************************************************************************/

/*
 *@Note
 *I2C interface routine to operate EEPROM peripheral:
 *I2C1_SCL(PB10)\I2C1_SDA(PB11).
 *This example uses EEPROM for AT24Cxx series.
 *Steps:
 *READ EEPROM:Start + 0xA0 + 8bit Data Address + Start + 0xA1 + Read Data + Stop.
 *WRITE EERPOM:Start + 0xA0 + 8bit Data Address + Write Data + Stop.	 
 *
 */

#include "debug.h"

/**********************************************************************
*@Note:
AT24Cxx£º

READ EEPROM£ºStart + 0xA0 + 8bit Data Address + Start + 0xA1 + Read Data + Stop.
WRITE EERPOM£ºStart + 0xA0 + 8bit Data Address + Write Data + Stop.
*******************************************************************************/
/* EERPOM DATA ADDRESS Length Definition */
#define Address_8bit  0
#define Address_16bit  1

/* EERPOM DATA ADDRESS Length Selection */
#define Address_Lenth   Address_8bit
//#define Address_Lenth   Address_16bit

/* Global define */
#define SIZE sizeof(TEXT_Buffer)

/* Global Variable */
const u8 TEXT_Buffer[]={"CH32F10x I2C TEST"};

/*********************************************************************
 * @fn      IIC_Init
 *
 * @brief   Initializes the IIC peripheral.
 *
 * @return  none
 */
void IIC_Init(u32 bound, u16 address)
{
	GPIO_InitTypeDef GPIO_InitStructure={0};
	I2C_InitTypeDef I2C_InitTSturcture={0};

	RCC_APB2PeriphClockCmd( RCC_APB2Periph_GPIOB, ENABLE );
	RCC_APB1PeriphClockCmd( RCC_APB1Periph_I2C2, ENABLE );

	GPIO_InitStructure.GPIO_Pin = GPIO_Pin_10;
	GPIO_InitStructure.GPIO_Mode = GPIO_Mode_AF_OD;
	GPIO_InitStructure.GPIO_Speed = GPIO_Speed_50MHz;
	GPIO_Init( GPIOB, &GPIO_InitStructure );

	GPIO_InitStructure.GPIO_Pin = GPIO_Pin_11;
	GPIO_InitStructure.GPIO_Mode = GPIO_Mode_AF_OD;
	GPIO_InitStructure.GPIO_Speed = GPIO_Speed_50MHz;
	GPIO_Init( GPIOB, &GPIO_InitStructure );

	I2C_InitTSturcture.I2C_ClockSpeed = bound;
	I2C_InitTSturcture.I2C_Mode = I2C_Mode_I2C;
	I2C_InitTSturcture.I2C_DutyCycle = I2C_DutyCycle_2;
	I2C_InitTSturcture.I2C_OwnAddress1 = address;
	I2C_InitTSturcture.I2C_Ack = I2C_Ack_Enable;
	I2C_InitTSturcture.I2C_AcknowledgedAddress = I2C_AcknowledgedAddress_7bit;
  I2C_Init( I2C2, &I2C_InitTSturcture );

	I2C_Cmd( I2C2, ENABLE );

	I2C_AcknowledgeConfig( I2C2, ENABLE );
}

/*********************************************************************
 * @fn      AT24CXX_Init
 *
 * @brief   Initializes AT24xx EEPROM.
 *
 * @return  none
 */
void AT24CXX_Init(void)
{
	IIC_Init( 100000, 0xA0);
}

/*********************************************************************
 * @fn      AT24CXX_ReadOneByte
 *
 * @brief   Read one data from EEPROM.
 *
 * @param   ReadAddr - Read frist address.
 *
 * @return  temp - Read data.
 */
u8 AT24CXX_ReadOneByte(u16 ReadAddr)
{
	u8 temp=0;

	while( I2C_GetFlagStatus( I2C2, I2C_FLAG_BUSY ) != RESET );
	I2C_GenerateSTART( I2C2, ENABLE );

	while( !I2C_CheckEvent( I2C2, I2C_EVENT_MASTER_MODE_SELECT ) );
	I2C_Send7bitAddress( I2C2, 0XA0, I2C_Direction_Transmitter );

	while( !I2C_CheckEvent( I2C2, I2C_EVENT_MASTER_TRANSMITTER_MODE_SELECTED ) );

#if (Address_Lenth  == Address_8bit)
	I2C_SendData( I2C2, (u8)(ReadAddr&0x00FF) );
	while( !I2C_CheckEvent( I2C2, I2C_EVENT_MASTER_BYTE_TRANSMITTED ) );

#elif (Address_Lenth  == Address_16bit)
	I2C_SendData( I2C2, (u8)(ReadAddr>>8) );
	while( !I2C_CheckEvent( I2C2, I2C_EVENT_MASTER_BYTE_TRANSMITTED ) );

	I2C_SendData( I2C2, (u8)(ReadAddr&0x00FF) );
	while( !I2C_CheckEvent( I2C2, I2C_EVENT_MASTER_BYTE_TRANSMITTED ) );

#endif

	I2C_GenerateSTART( I2C2, ENABLE );

	while( !I2C_CheckEvent( I2C2, I2C_EVENT_MASTER_MODE_SELECT ) );
	I2C_Send7bitAddress( I2C2, 0XA0, I2C_Direction_Receiver );

	while( !I2C_CheckEvent( I2C2, I2C_EVENT_MASTER_RECEIVER_MODE_SELECTED ) );
  while( I2C_GetFlagStatus( I2C2, I2C_FLAG_RXNE ) ==  RESET )
	I2C_AcknowledgeConfig( I2C2, DISABLE );

	temp = I2C_ReceiveData( I2C2 );
  I2C_GenerateSTOP( I2C2, ENABLE );

	return temp;
}

/*********************************************************************
 * @fn      AT24CXX_WriteOneByte
 *
 * @brief   Write one data to EEPROM.
 *
 * @param   WriteAddr - Write frist address.
 *
 * @return  DataToWrite - Write data.
 */
void AT24CXX_WriteOneByte(u16 WriteAddr, u8 DataToWrite)
{
	while( I2C_GetFlagStatus( I2C2, I2C_FLAG_BUSY ) != RESET );
	I2C_GenerateSTART( I2C2, ENABLE );

	while( !I2C_CheckEvent( I2C2, I2C_EVENT_MASTER_MODE_SELECT ) );
	I2C_Send7bitAddress( I2C2, 0XA0, I2C_Direction_Transmitter );

	while( !I2C_CheckEvent( I2C2, I2C_EVENT_MASTER_TRANSMITTER_MODE_SELECTED ) );

#if (Address_Lenth  == Address_8bit)
	I2C_SendData( I2C2, (u8)(WriteAddr&0x00FF) );
	while( !I2C_CheckEvent( I2C2, I2C_EVENT_MASTER_BYTE_TRANSMITTED ) );

#elif (Address_Lenth  == Address_16bit)
	I2C_SendData( I2C2, (u8)(WriteAddr>>8) );
	while( !I2C_CheckEvent( I2C2, I2C_EVENT_MASTER_BYTE_TRANSMITTED ) );

	I2C_SendData( I2C2, (u8)(WriteAddr&0x00FF) );
	while( !I2C_CheckEvent( I2C2, I2C_EVENT_MASTER_BYTE_TRANSMITTED ) );

#endif

	if( I2C_GetFlagStatus( I2C2, I2C_FLAG_TXE ) !=  RESET )
	{
		I2C_SendData( I2C2, DataToWrite );
	}

	while( !I2C_CheckEvent( I2C2, I2C_EVENT_MASTER_BYTE_TRANSMITTED ) );
	I2C_GenerateSTOP( I2C2, ENABLE );
}

/*********************************************************************
 * @fn      AT24CXX_Read
 *
 * @brief   Read multiple data from EEPROM.
 *
 * @param   ReadAddr - Read frist address. (AT24c02: 0~255)
 *          pBuffer - Read data.
 *          NumToRead - Data number.
 *
 * @return  none
 */
void AT24CXX_Read(u16 ReadAddr, u8 *pBuffer, u16 NumToRead)
{
	while(NumToRead)
	{
		*pBuffer++=AT24CXX_ReadOneByte(ReadAddr++);
		NumToRead--;
	}
}

/*********************************************************************
 * @fn      AT24CXX_Write
 *
 * @brief   Write multiple data to EEPROM.
 *
 * @param   WriteAddr - Write frist address. (AT24c02: 0~255)
 *          pBuffer - Write data.
 *          NumToWrite - Data number.
 *
 * @return  none
 */
void AT24CXX_Write(u16 WriteAddr, u8 *pBuffer, u16 NumToWrite)
{
	while(NumToWrite--)
	{
		AT24CXX_WriteOneByte(WriteAddr,*pBuffer);
		WriteAddr++;
		pBuffer++;
		Delay_Ms(2);
	}
}

/*********************************************************************
 * @fn      main
 *
 * @brief   Main program.
 *
 * @return  none
 */
int main(void)
{
	u8 data[SIZE];

	SystemCoreClockUpdate();
	Delay_Init();
	USART_Printf_Init(115200);
	printf("SystemClk:%d\r\n",SystemCoreClock);
	printf( "ChipID:%08x\r\n", DBGMCU_GetCHIPID() );

	AT24CXX_Init();

	printf("Start Write 24Cxx....\r\n");
	AT24CXX_Write(100,(u8*)TEXT_Buffer,SIZE);
	printf("24Cxx Write Sucess!\r\n");

	Delay_Ms(500);

	printf("Start Read 24Cxx....\r\n");
	AT24CXX_Read(100,data,SIZE);
	printf("The Data Readed Is: \r\n");
	printf("%s\r\n", data);

  while(1);
}