142 lines
4.1 KiB
C
142 lines
4.1 KiB
C
/********************************** (C) COPYRIGHT *******************************
|
|
* File Name : main.c
|
|
* Author : WCH
|
|
* Version : V1.0.0
|
|
* Date : 2021/06/06
|
|
* Description : Main program body.
|
|
*********************************************************************************
|
|
* Copyright (c) 2021 Nanjing Qinheng Microelectronics Co., Ltd.
|
|
* Attention: This software (modified or not) and binary are used for
|
|
* microcontroller manufactured by Nanjing Qinheng Microelectronics.
|
|
*******************************************************************************/
|
|
|
|
/*
|
|
*@Note
|
|
*when LV is not enabled in standby mode, RAM 2k and 30K low-power data holding routines:
|
|
*This routine demonstrates writing data at the specified location of 2K RAM and 30K RAM,
|
|
*and then WFI enters STANDBY sleep mode, through the PA0 (wakeup) pin Input high level
|
|
*to exit standby mode, print RAM data after waking up, and test whether RAM is maintained
|
|
*data.
|
|
*
|
|
*/
|
|
|
|
#include "debug.h"
|
|
|
|
/* Global define */
|
|
|
|
/* Global Variable */
|
|
|
|
/*********************************************************************
|
|
* @fn TestDataWrite
|
|
*
|
|
* @brief Write 0x11111111 to certain address of 2K RAM and 30K RAM.
|
|
*
|
|
* @return none
|
|
*/
|
|
void TestDataWrite(void)
|
|
{
|
|
uint32_t myAddr=0x20000000+10*1024;
|
|
uint32_t myAddr2=0x20000000+1*1024+512;
|
|
uint32_t i=0;
|
|
for(i=0;i<1024;i++)//Write 30K RAM
|
|
{
|
|
*(uint32_t volatile *)(myAddr+(i<<2)) = 0x33333333;
|
|
}
|
|
for(i=0;i<1024;i++)//Check 30K RAM
|
|
{
|
|
if((*(uint32_t volatile *)(myAddr+(i<<2))) != 0x33333333)
|
|
{
|
|
printf("Write 30K RAM Error!\r\n");
|
|
break;
|
|
}
|
|
}
|
|
printf("Write 30K RAM Successfully!\r\n");
|
|
for(i=0;i<10;i++)//Write 2K RAM
|
|
{
|
|
*(uint32_t volatile *)(myAddr2+(i<<2)) = 0x33333333;
|
|
}
|
|
for(i=0;i<10;i++)//Check 30K RAM
|
|
{
|
|
if((*(uint32_t volatile *)(myAddr2+(i<<2))) != 0x33333333)
|
|
{
|
|
printf("Write 2K RAM Error!\r\n");
|
|
break;
|
|
}
|
|
}
|
|
printf("Write 2K RAM Successfully!\r\n");
|
|
|
|
}
|
|
|
|
/*********************************************************************
|
|
* @fn TestDataRead
|
|
*
|
|
* @brief Print the data of certain address of 2K RAM and 30K RAM.
|
|
*
|
|
* @return none
|
|
*/
|
|
void TestDataRead(void)
|
|
{
|
|
uint32_t myAddr=0x20000000+10*1024;
|
|
uint32_t myAddr2=0x20000000+1*1024+512;
|
|
uint32_t i=0;
|
|
printf("2K RAM:\r\n");
|
|
for(i=0;i<10;i++)
|
|
{
|
|
printf("0x%08lx=0x%08lx\r\n",myAddr2+(i<<2),*(uint32_t volatile *)(myAddr2+(i<<2)));
|
|
}
|
|
printf("32K RAM:\r\n");
|
|
for(i=0;i<1024;i++)
|
|
{
|
|
printf("0x%08lx=0x%08lx\r\n",myAddr+(i<<2),*(uint32_t volatile *)(myAddr+(i<<2)));
|
|
}
|
|
|
|
}
|
|
|
|
/*********************************************************************
|
|
* @fn main
|
|
*
|
|
* @brief Main program.
|
|
*
|
|
* @return none
|
|
*/
|
|
int main(void)
|
|
{
|
|
GPIO_InitTypeDef GPIO_InitStructure={0};
|
|
|
|
/* Configure unused GPIO as IPD to reduce power consumption */
|
|
RCC_APB2PeriphClockCmd(RCC_APB2Periph_GPIOA|RCC_APB2Periph_GPIOB|
|
|
RCC_APB2Periph_GPIOC|RCC_APB2Periph_GPIOD|RCC_APB2Periph_GPIOE, ENABLE);
|
|
GPIO_InitStructure.GPIO_Pin = GPIO_Pin_All;
|
|
GPIO_InitStructure.GPIO_Mode = GPIO_Mode_IPD;
|
|
|
|
GPIO_Init(GPIOA, &GPIO_InitStructure);
|
|
GPIO_Init(GPIOB, &GPIO_InitStructure);
|
|
GPIO_Init(GPIOC, &GPIO_InitStructure);
|
|
GPIO_Init(GPIOD, &GPIO_InitStructure);
|
|
GPIO_Init(GPIOE, &GPIO_InitStructure);
|
|
|
|
NVIC_PriorityGroupConfig(NVIC_PriorityGroup_1);
|
|
SystemCoreClockUpdate();
|
|
Delay_Init();
|
|
USART_Printf_Init(115200);
|
|
printf("SystemClk:%d\r\n", SystemCoreClock);
|
|
printf( "ChipID:%08x\r\n", DBGMCU_GetCHIPID() );
|
|
|
|
RCC_APB1PeriphClockCmd(RCC_APB1Periph_PWR, ENABLE);
|
|
|
|
/* Delay 1.5s to avoid entering low power mode immediately after reset*/
|
|
Delay_Ms(1500);
|
|
while(1)
|
|
{
|
|
TestDataRead();
|
|
printf("3.Stop RAM LV Mode Test\r\n");
|
|
TestDataWrite();
|
|
PWR_WakeUpPinCmd(ENABLE);
|
|
PWR_EnterSTANDBYMode_RAM();
|
|
printf("\r\n3.Out \r\n");
|
|
printf("\r\n ########## \r\n");
|
|
|
|
}
|
|
}
|
|
|