112 lines
3.7 KiB
C
112 lines
3.7 KiB
C
/********************************** (C) COPYRIGHT *******************************
|
|
* File Name : main.c
|
|
* Author : WCH
|
|
* Version : V1.0.1
|
|
* Date : 2025/07/29
|
|
* Description : Main program body.
|
|
*********************************************************************************
|
|
* Copyright (c) 2021 Nanjing Qinheng Microelectronics Co., Ltd.
|
|
* Attention: This software (modified or not) and binary are used for
|
|
* microcontroller manufactured by Nanjing Qinheng Microelectronics.
|
|
*******************************************************************************/
|
|
|
|
/*
|
|
*@Note
|
|
*low power, sleep mode routine:
|
|
*EXTI_Line0(PA0)
|
|
*This routine demonstrates WFI enters sleep mode, PA0 pin input high level triggers external
|
|
*interrupt EXTI_Line0 to exit sleep mode,Program execution continues after wake-up.
|
|
*For the small package model of the chip, there are some pins that have not been led out
|
|
*compared to the largest package, or some pins that have been packaged but not used.
|
|
*These pins need to be set as pull-down\up inputs to reduce power consumption.Please refer
|
|
*to the routine configuration for details.
|
|
*/
|
|
|
|
#include "debug.h"
|
|
|
|
/* Global define */
|
|
|
|
/* Global Variable */
|
|
|
|
/*********************************************************************
|
|
* @fn EXTI0_INT_INIT
|
|
*
|
|
* @brief Initializes EXTI0 collection.
|
|
*
|
|
* @return none
|
|
*/
|
|
void EXTI0_INT_INIT(void)
|
|
{
|
|
GPIO_InitTypeDef GPIO_InitStructure = {0};
|
|
EXTI_InitTypeDef EXTI_InitStructure = {0};
|
|
NVIC_InitTypeDef NVIC_InitStructure = {0};
|
|
|
|
RCC_APB2PeriphClockCmd(RCC_APB2Periph_AFIO | RCC_APB2Periph_GPIOA, ENABLE);
|
|
|
|
GPIO_InitStructure.GPIO_Pin = GPIO_Pin_0;
|
|
GPIO_InitStructure.GPIO_Mode = GPIO_Mode_IPD;
|
|
GPIO_Init(GPIOA, &GPIO_InitStructure);
|
|
|
|
/* GPIOA.0 ----> EXTI_Line0 */
|
|
GPIO_EXTILineConfig(GPIO_PortSourceGPIOA, GPIO_PinSource0);
|
|
EXTI_InitStructure.EXTI_Line = EXTI_Line0;
|
|
EXTI_InitStructure.EXTI_Mode = EXTI_Mode_Interrupt;
|
|
EXTI_InitStructure.EXTI_Trigger = EXTI_Trigger_Rising;
|
|
EXTI_InitStructure.EXTI_LineCmd = ENABLE;
|
|
EXTI_Init(&EXTI_InitStructure);
|
|
|
|
NVIC_InitStructure.NVIC_IRQChannel = EXTI0_IRQn;
|
|
NVIC_InitStructure.NVIC_IRQChannelPreemptionPriority = 1;
|
|
NVIC_InitStructure.NVIC_IRQChannelSubPriority = 2;
|
|
NVIC_InitStructure.NVIC_IRQChannelCmd = ENABLE;
|
|
NVIC_Init(&NVIC_InitStructure);
|
|
}
|
|
|
|
/*********************************************************************
|
|
* @fn main
|
|
*
|
|
* @brief Main program.
|
|
*
|
|
* @return none
|
|
*/
|
|
int main(void)
|
|
{
|
|
GPIO_InitTypeDef GPIO_InitStructure = {0};
|
|
NVIC_PriorityGroupConfig(NVIC_PriorityGroup_1);
|
|
SystemCoreClockUpdate();
|
|
Delay_Init();
|
|
Delay_Ms(1000);
|
|
|
|
/* To reduce power consumption, unused GPIOs need to be set as pull-down inputs */
|
|
RCC_APB2PeriphClockCmd(RCC_APB2Periph_GPIOA|RCC_APB2Periph_GPIOB|
|
|
RCC_APB2Periph_GPIOC|RCC_APB2Periph_GPIOD|RCC_APB2Periph_AFIO, ENABLE);
|
|
GPIO_PinRemapConfig(GPIO_Remap_SWJ_Disable,ENABLE);
|
|
|
|
GPIO_InitStructure.GPIO_Pin = GPIO_Pin_All;
|
|
GPIO_InitStructure.GPIO_Mode = GPIO_Mode_IPD;
|
|
GPIO_Init(GPIOA, &GPIO_InitStructure);
|
|
GPIO_Init(GPIOB, &GPIO_InitStructure);
|
|
GPIO_Init(GPIOC, &GPIO_InitStructure);
|
|
GPIO_Init(GPIOD, &GPIO_InitStructure);
|
|
|
|
USART_Printf_Init(115200);
|
|
printf("SystemClk:%d\r\n", SystemCoreClock);
|
|
printf( "ChipID:%08x\r\n", DBGMCU_GetCHIPID() );
|
|
printf("Sleep Mode Test\r\n");
|
|
EXTI0_INT_INIT();
|
|
|
|
printf("\r\n ********** \r\n");
|
|
if(((RCC->CFGR0 & RCC_SWS)==0x04)||((RCC->CFGR0 & RCC_PLLSRC) == RCC_PLLSRC))
|
|
{
|
|
RCC_HSICmd(DISABLE);
|
|
}
|
|
__WFI();
|
|
printf("\r\n ########## \r\n");
|
|
|
|
while(1)
|
|
{
|
|
Delay_Ms(1000);
|
|
printf("Run in main\r\n");
|
|
}
|
|
}
|