81 lines
2.6 KiB
C
81 lines
2.6 KiB
C
/********************************** (C) COPYRIGHT *******************************
|
|
* File Name : main.c
|
|
* Author : WCH
|
|
* Version : V1.0.1
|
|
* Date : 2025/7/29
|
|
* Description : Main program body.
|
|
*********************************************************************************
|
|
* Copyright (c) 2021 Nanjing Qinheng Microelectronics Co., Ltd.
|
|
* Attention: This software (modified or not) and binary are used for
|
|
* microcontroller manufactured by Nanjing Qinheng Microelectronics.
|
|
*******************************************************************************/
|
|
|
|
/*
|
|
*@Note
|
|
*low power, standby mode routine:
|
|
*WKUP(PA0)
|
|
*This routine demonstrates that WFI enters the standby mode, the rising edge of
|
|
*the WKUP (PA0) pin exits the standby mode,Program reset after wake-up.
|
|
*For the small package model of the chip, there are some pins that have not been led out
|
|
*compared to the largest package, or some pins that have been packaged but not used.
|
|
*These pins need to be set as pull-down\up inputs to reduce power consumption.
|
|
*Please refer to the routine configuration for details.
|
|
*/
|
|
|
|
#include "debug.h"
|
|
|
|
/* Global define */
|
|
|
|
/* Global Variable */
|
|
|
|
/*********************************************************************
|
|
* @fn main
|
|
*
|
|
* @brief Main program.
|
|
*
|
|
* @return none
|
|
*/
|
|
int main(void)
|
|
{
|
|
GPIO_InitTypeDef GPIO_InitStructure = {0};
|
|
NVIC_PriorityGroupConfig(NVIC_PriorityGroup_1);
|
|
SystemCoreClockUpdate();
|
|
Delay_Init();
|
|
Delay_Ms(1000);
|
|
/* To reduce power consumption, unused GPIOs need to be set as pull-down inputs */
|
|
RCC_APB2PeriphClockCmd(RCC_APB2Periph_GPIOA|RCC_APB2Periph_GPIOB|
|
|
RCC_APB2Periph_GPIOC|RCC_APB2Periph_GPIOD|RCC_APB2Periph_AFIO, ENABLE);
|
|
GPIO_PinRemapConfig(GPIO_Remap_SWJ_Disable,ENABLE);
|
|
GPIO_InitStructure.GPIO_Pin = GPIO_Pin_All;
|
|
GPIO_InitStructure.GPIO_Mode = GPIO_Mode_IPD;
|
|
GPIO_Init(GPIOA, &GPIO_InitStructure);
|
|
GPIO_Init(GPIOB, &GPIO_InitStructure);
|
|
GPIO_Init(GPIOC, &GPIO_InitStructure);
|
|
GPIO_Init(GPIOD, &GPIO_InitStructure);
|
|
|
|
USART_Printf_Init(115200);
|
|
printf("SystemClk:%d\r\n", SystemCoreClock);
|
|
printf( "ChipID:%08x\r\n", DBGMCU_GetCHIPID() );
|
|
printf("Standby Mode Test\r\n");
|
|
|
|
RCC_APB1PeriphClockCmd(RCC_APB1Periph_PWR, ENABLE);
|
|
|
|
if(PWR_GetFlagStatus(PWR_FLAG_WU) == SET)
|
|
{
|
|
printf("\r\n Standby wake up reset \r\n");
|
|
}
|
|
else
|
|
{
|
|
printf("\r\n Power on reset \r\n");
|
|
PWR_WakeUpPinCmd(ENABLE);
|
|
PWR_EnterSTANDBYMode();
|
|
}
|
|
|
|
printf("\r\n ########## \r\n");
|
|
while(1)
|
|
{
|
|
Delay_Ms(1000);
|
|
printf("Run in main\r\n");
|
|
}
|
|
}
|